A65471-000 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Ident. L 1.75 B C H E F D Name Code (L 0.070) min min min max min max 16.50 1.90 2.67 8.25 2.67 0.90 1.90 S03-11-R-100 N/C SIZE1R (0.650) (0.070) (0.105) (0.325) (0.105) (0.035) (0.070) 16.50 2.67 3.68 8.25 3.68 1.40 2.67 S03-12-R-100 N/C SIZE2R (0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.105) 16.50 4.32 5.08 8.25 5.08 2.15 4.32 S03-13-R-100 N/C SIZE3R (0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.170) 19.10 5.97 6.48 8.25 6.48 3.30 5.97 S03-14-R-100 N/C SIZE4R (0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.235) 19.10 6.98 7.62 8.25 7.62 4.32 6.98 S03-15-R-100 N/C SIZE5R (0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROL1 per ANSI/J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Silver-plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Tyco Electronics/Raychem. 2. For installation procedure, consult Tyco Electronics/Raychem process standard RCPS-100-70. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: TITLE: Tyco Electronics Corporation SOLDERSLEEVE DEVICE SHIELD 300 Constitution Drive, Raychem TERMINATION WITH SILVER-PLATED Menlo Park, CA. 94025, U.S.A. BRAID DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets S03-1X-R-100 TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend 0.00 N/A this drawing at any time. Users should PROD. REV.: DOC. ISSUE: DATE: 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for their SEE TABLE 0 20-May-03 0 N/A MICRON application. PREPARED BY: DCR NUMBER: REPLACES: CAGE CODE: SCALE: SIZE: SHEET: mforonda D030278 N/A 06090 --- A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : CTA-0027 CTC-0062-20-9/5-9 CTC-0062-22-9/5-9 650076N001 680441-000 D-150-0331CS2902 D-181-1222-90/9CS2800 D-300- 01CS1108 982127-1 D-436-0127CS391 D-436-0182CS246 D-436-37CS2651 D-436-58CS246 D-436-61CS246 D-436-82-CS2621 D-659- 0087 D-750-0005CS2493 E53797N001 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 SO63-2-9036-22CS2677 SO63-3-01CS293 SO63-3-9036-20CS2677 SO63-3-9036-22CS2677 SO63-4-9036-20CS2677 SO63-5-9036-22CS2677 CC1525-000 CTA-0025 CTA- 0025CS072 D-108-01CS227 D-108-07CS436 D-128-0010 D-141-0108CS404 D-142-51-202-7754 D-144-41CS1371 D-150-0231- NRCS2896 B-801-18-01 B-801-58 515-9 C67137-000 D-436-36CS2908 D-436-37CS2908 D-436-52CS246 D-436-83CS2705 D-438-0102 LSS-26-8A 427243-000 D-106-2012 D-300-08CS1108