SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product L A B E C D F H0.5 G0.5 Name max min min max max min min (H0.02) (G0.02) B-013-10 H 17.2 2.6 3.9 2.6 3.9 1.4 1.2 5.5 7.0 (0.675) (0.085) (0.155) (0.100) (0.155) (0.055) (0.045) (0.215) (0.275) B-013-11 E 17.2 4.8 5.9 4.8 5.9 2.5 1.7 5.5 7.0 (0.675) (0.190) (0.230) (0.190) (0.230) (0.100) (0.065) (0.215) (0.275) B-013-12 F 20.8 6.8 8.3 6.8 8.3 4.1 3.0 5.5 7.0 (0.820) (0.270) (0.325) (0.270) (0.325) (0.160) (0.120) (0.215) (0.275) B-013-13 F 24.5 10 11.6 10 11.6 6.5 4.5 8.0 9.5 (0.965) (0.395) (0.455) (0.395) (0.455) (0.255) (0.175) (0.315) (0.375) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. Color: blue. APPLICATION 1. These controlled soldering devices are designed for termination of a nickel plated copper shield on cables having an insulation rated for at least +150C. 2. Temperature range: -55C to +175C with excursion to 200C. 3. When installed per Raychem Process Standard, RCPS-100-70 or Aerospatiale Process Standard, IPDA 83-16, assemblies will meet those requirements of Raychem Specifications RT-1404. For best results, prepare the cable as shown: TITLE: THERMOFIT SOLDERSLEEVE DEVICE DEVICES 300 Constitution Drive WITH LOCALIZED SOLDER Menlo Park, CA 94025, USA HIGH TEMPERATURE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: B-013-1X INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D000155 D980890 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV.: DOC. ISSUE: SCALE: SIZE: SHEET: M. FORONDA 19-April-00 SEE TABLE 17 None A 1 of 1