B-051-65 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Name A B L D E G J0.5 H0.5 min. min max max min max B-051-65 D 10.8 11.6 31.5 11.6 5.8 10.8 15 14 B-051-66 D 13 14 31.5 14 8.7 13 15 14 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. APPLICATION 1. These controlled soldering devices are designed for termination of a tin plated copper shield on a cable having an insulation rated for at least +105C. 2. Temperature range: -55C to +115C. For application tooling, consult your local Raychem technical service. For best results, prepare the cable as shown: False center strip * A trademark of Raychem Corporation. TITLE: Raychem Corporation THERMOFIT Raychem 300 Constitution Drive SHIELD TERMINATION DEVICES Menlo Park, CA 94025 LOW TEMPERATURE USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: B-051-65/66 INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D980629 B0516X 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 06/15/98 SEE TAB 1 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.