SPECIFICATION CONTROL DRAWING
1
Product Revision Product Dimensions Cable Dimensions
Qty:
2
Product A B L D E F G
Item 2
J
Name min min max max min min max
2.50 3.00 24.50 3.00 1.50 1.00 2.50 7.000.50
B-155-03-35-GA-CL --- 1
[0.098] [0.118] [0.965] [0.118] [0.059] [0.040] [0.098] [0.2760.020]
4.30 4.80 29.30 4.80 2.00 1.50 4.30 9.000.50
B-155-05-35-GA-CL --- 1
[0.169] [0.189] [1.154] [0.189] [0.079] [0.059] [0.169] [0.3540.020]
6.00 6.70 32.00 6.70 3.30 2.80 6.00 10.00 0.50
B-155-06-35-GA-CL --- 1
[0.236] [0.264] [1.260] [0.264] [0.130] [0.110] [0.236] [0.3940.020]
6.40 7.30 32.50 7.30 3.30 2.80 6.40 11.001.00
B-155-07-35-GA-CL --- 1
[0.252] [0.287] [1.280] [0.287] [0.130] [0.110] [0.252] [0.4330.040]
8.70 9.20 35.50 9.20 4.50 4.00 8.70 12.00 1.00
B-155-09-35-GA-CL --- 2
[0.343] [0.362] [1.398] [0.362] [0.177] [0.157] [0.343] [0.4720.040]
10.00 11.50 35.50 11.50 4.50 4.00 10.00 13.001.00
B-155-11-35-GA-CL --- 2
[0.394] [0.453] [1.398] [0.453] [0.177] [0.157] [0.394] [0.5120.040]
13.00 15.00 45.50 15.10 7.00 6.50 13.00 17.001.00
B-155-13-35-GA-CL --- 3
[0.512] [0.591] [1.791] [0.594] [0.276] [0.256] [0.512] [0.6690.040]
1
Consult TE Connectivity for individual product revision. Contains more than 1 part name.
MATERIALS
1. INSULATION SLEEVE: Transparent heat-shrinkable radiation cross-linked modified polyolefin.
2. SOLDER PREFORMS WITH FLUX: Qty: see table (one solder washer shown).
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic.
4. GROUND LEAD: Raychem cross-linked polyolefin-insulated wire, stranded tin-plated copper. Consult TE Connectivity for
sizes and colors other than listed below.
2
Part no. callout shall be replaced with;
GA = wire size AWG; AWG 22 available.
CL = Lead color designation per MIL-STD-681. Available color: green (5); white (9).
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85C, meeting the dimensional criteria listed in the table above.
2. Temperature range: -55C to +125C.
3. When installed properly, these devices will meet the requirements of TE Connectivity/Raychem Specification RT-1404.
4. For installation procedure and application equipment, consult TE Connectivity /Raychem RPIP 824-00.
For best results, prepare
the cable as shown:
TITLE:
TE Connectivity
SOLDERSLEEVE TERMINATOR WITH
300 Constitution Drive,
Raychem
Menlo Park, CA. 94025, U.S.A.
PRE-INSTALLED LEAD
DOCUMENT NO.:
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
B-155-XX-35-GA-CL
TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend
0.00 N/A this drawing at any time. Users should evaluate
PROD. REV.: DOC. ISSUE: DATE:
0.0 N/A ROUGHNESS IN the suitability of the product for their
SEE TABLE 2 16-Apr-11
0 N/A MICRON application.
PREPARED BY: DCR NUMBER: REPLACES: CAGE CODE : SCALE: SIZE: SHEET:
mforonda D050222 --- 06090 --- A 1 of 1
Print Date: 9-May-11 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.