B-801-58 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revisions Product Dimensions XY Cable Dimensions Product L A B K Wire Gauge D F M0.5 Names max min min min (AWG) max (M0.02) B-801-50 G 30 0.30 (0.015) B-801-56 G 17.50 1.40 2.80 150 26 2.40 to 5.00 (0.690) (0.055) (0.110) (5.900) (0.095) 1.40 (0.200) B-801-58 G 28 (0.055) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. MELTABLE RING: Thermally stabilized thermoplastic. Color: red. 4. CONDUCTOR LEAD: MIL-W-81822/13 AWG XY (see table) solid silver plated copper wire. Color: white. APPLICATION 1. These controlled soldering devices are designed to terminate with a solid extension lead: -a metallic pin or -the primary of a coaxial cable or -one or several tin or silver plated wire(s), having an insulation rated for at least +125C. 2. Temperature range: -55 C to +150 C. 3. Install using Raychem-approved convection or infrared tools in accordance with Raychem Installation Procedure RPIP-825-00. For best results, prepare the wire(s) as shown: TITLE : SOLDERSLEEVE DEVICE EXTENSION 307 Constitution Drive Menlo Park, CA 94025, USA Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.: B-801-5X Inches dimensions are in between brackets. TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to DCR NUMBER: REPLACES: 0.00 N/A amend this drawing at any time. Users D010114 D981693 0.0 N/A ROUGHNESS IN should evaluate the suitability of the 0 N/A MICRON product for their application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 11-Apr.-01 SEE TABLE 4 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.