SCD FLDW+0311 SPECIFICATION CONTROL DRAWING Date Revision Title DUAL WALL HOOKUP WIRE, RADIATION-CROSSLINKED, POLYALKENE-INSULATED, 600 VOLT 8-6-19 R The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of Raychem Specification WCD 3106, UL Subject 758, Style 3584, File E303150 and carries UL labels to this effect. PRIMARY INSULATION - RADIATION-CROSSLINKED, EXTRUDED POLYALKENE CONDUCTOR - TIN-COATED COPPER JACKET - RADIATION-CROSSLINKED, MODIFIED PVDF TABLE I. CONSTRUCTION DETAILS FINISHED WIRE NOMINAL MAXIMUM WIRE CONDUCTOR MAXIMUM DIAMETER PART NUMBER CONDUCTOR RESISTANCE SIZE STRANDING WEIGHT (inch) (mm) 1/ DIAMETER AT 20C (AWG) (number x AWG) (lbs/1000 ft.) (inch) (mm) (ohms/1000 ft.) (kg/km) (ohms/km) MINIMUM NOMINAL MAXIMUM FLDWC0311-26-* 26 19 x 38 .019 (.483) 45.8 (150.) .038 (.965) .040 (1.02) .042 (1.07) 1.6 (2.38) FLDWC0311-24-* 24 19 x 36 .024 (.610) 28.7 (94.2) .044 (1.12) .046 (1.17) .048 (1.22) 2.4 (3.57) FLDWC0311-22-* 22 19 x 34 .030 (.762) 18.1 (59.4) .052 (1.32) .054 (1.37) .056 (1.42) 3.5 (5.21) FLDWC0311-20-* 20 19 x 32 .038 (.965) 11.4 (37.4) .060 (1.52) .062 (1.57) .064 (1.63) 5.1 (7.59) FLDWC0311-18-* 18 19 x 30 .047 (1.19) 7.15 (23.5) .070 (1.78) .073 (1.85) .076 (1.93) 7.7 (11.5) FLDWC0311-16-* 16 19 x 29 .053 (1.35) 4.82 (15.8) .078 (1.98) .081 (2.06) .084 (2.13) 9.8 (14.6) FLDWC0311-14-* 14 19 x 27 .066 (1.68) 3.05 (10.0) .094 (2.39) .098 (2.49) .102 (2.59) 14.7 (21.9) FLDWC0311-12-* 12 19 x 25 .090 (2.29) 1.92 (6.30) .118 (3.00) .122 (3.10) .126 (3.20) 24.5 (36.5) FLDWD0311-12-* 12 37 x 28 .085 (2.16) 2.01 (6.59) .113 (2.87) .117 (2.97) .121 (3.07) 22.1 (32.9) FLDWD0311-10-* 10 37 x 26 .107 (2.72) 1.26 (4.13) .142 (3.61) .146 (3.71) .150 (3.81) 35.6 (53.0) FLDWE0311-8-* 8 133 x 29 .160 (4.06) .701 (2.30) .200 (5.08) .206 (5.23) .212 (5.38) 61.8 (92.0) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE connectivity, and TE connectivity (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. Redwood City, CA 94063-3800 Page 1 of 2 Phone: 1-800-522-6752 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 2005-2019 TE Connectivity Ltd. family of companies. All Rights Reserved. Page Revision SCD SPECIFICATION CONTROL DRAWING FLDW+0311 2 of 2 R TABLE II. PERFORMANCE DETAILS CROSSLINK VERIFICATION - BEND TESTING PART NUMBER MANDREL DIAMETER WEIGHT 1/ (inch) (mm) ( 3%) (lb) (kg) ( 3%) FLDWC0311-26-* .500 (12.7) .375 (.170) FLDWC0311-24-* .500 (12.7) .375 (.170) FLDWC0311-22-* .750 (19.1) .375 (.170) FLDWC0311-20-* .750 (19.1) .500 (.227) FLDWC0311-18-* 1.00 (25.4) .500 (.227) FLDWC0311-16-* 1.00 (25.4) 1.00 (.454) FLDWC0311-14-* 1.50 (38.1) 1.00 (.454) FLDWC0311-12-* 2.00 (50.8) 1.50 (.680) FLDWD0311-12-* 2.00 (50.8) 1.50 (.680) FLDWD0311-10-* 3.00 (76.2) 2.00 (.907) FLDWE0311-8-* 3.00 (76.2) 3.00 (1.36) WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 125C THERMAL STABILITY: 158C for 168 hours VOLTAGE RATING: 600 volts (rms) at sea level Elongation Retention, 70% (minimum) CROSSLINK VERIFICATION: 300 3C for 1 hour Tensile Strength Retention, 70% (minimum) FLAME RATING: VW-1 VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes INSULATION ELONGATION AND TENSILE STRENGTH: Primary Insulation, 1/ PART NUMBER: Elongation, 150% (minimum) The in the part number in the upper right hand corner of pages 1 and 2 shall 2 Tensile Strength, 2500 lbf/in (17.2 MPa) (minimum) be replaced with a letter designator to define conductor stranding (see part INSULATION FLAWS: numbers in Tables I and II). Finished Wire, C = 19 Strands D = 37 Strands E = Rope Lay Spark Test, 6.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) The in the part numbers in Tables I and II shall be replaced by a color code INSULATION THICKNESS: designator. Primary Insulation, Example: AWG 18, 19 strands, white: FLDWC0311-18-9 .004 inch (.102 mm) (minimum), .005 inch (.127 mm) (minimum average) AWG 18, 19 strands, white with a black stripe: FLDWC0311-18-90 Jacket, .002 inch (.051 mm) (minimum) for AWGs 12 and smaller Jacket, .004 inch (.102 mm) (minimum) for AWGs 10 and larger SHRINKAGE: 125C for 1 hour, 0.125 in. ( 3.18 mm) (maximum) per end All spool/reel labels shall include the following: Reinforced Insulatio 1/ See footer section on page 1