CUSTOMER DRAWING Product Ident. Product Dimensions Cable Dimensions Name Code B C D E F L1.75 (L0.070) min min max max min S200-1-01-100HN S2001R 16.50 1.90 2.67 1.90 2.67 0.90 (0.650) (0.075) (0.105) (0.075) (0.105) (0.035) S200-2-01-100HN S2002R 16.50 2.67 3.68 2.67 3.68 1.40 (0.650) (0.105) (0.145) (0.105) (0.145) (0.055) S200-3-01-100HN S2003R 16.50 4.32 5.08 4.32 5.08 2.15 (0.650) (0.170) (0.200) (0.170) (0.200) (0.085) S200-4-01-100HN S2004R 19.10 5.97 6.48 5.97 6.48 3.30 (0.750) (0.235) (0.255) (0.235) (0.255) (0.130) S200-5-01-100HN S2005R 19.10 6.98 7.62 6.98 7.62 4.30 (0.750) (0.275) (0.300) (0.275) (0.300) (0.170) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. THERMAL INDICATOR: Fusible ring. 3. MELTABLE SEALING RINGS: Environment resistant modified thermoplastic fluoropolymer. Color: light blue. 4. PRE-INSTALLED BRAID: Nickel-plated copper strands per ASTM-B355 Class 7. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 150 C minimum, meeting the dimensional criteria listed, having silver or nickel-plated shields. 2. Install using TE Connectivity-approved convection or infrared heating tools in accordance with Tyco Electronics process standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets. 3. Parts shall be marked with identification code per table. 4. Temperature range: -65 C to +200 C. 5. For best results, prepare the cable as shown: TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks TITLE: Raychem SOLDERSLEEVE SHIELD TERMINATOR WITH PRE-INSTALLED BRAID, 200 DEG C, ROHS COMPLIANT Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.: Inches dimensions are shown in brackets S200-X-01-100HN TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this drawing at 0.00 N/A any time. Users should evaluate the suitability of the Revision : Issue Date : 0.0 N/A ROUGHNESS product for their application. D 0 N/A IN MICRON April 2020 DRAWN BY: CAGE CODE: DATE: SCALE: SIZE: SHEET: ECO: ECO-20-004961 P.TALLY 06090 NTS A 1 of 1 23-Mar-2016 2020 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : CTC-0062-20-9/5-9 CTC-0062-22-9/5-9 650076N001 680441-000 D-150-0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 982127- 1 D-436-0127CS391 D-436-0182CS246 D-436-37CS2651 D-436-58CS246 D-436-61CS246 D-436-82-CS2621 D-750-0005CS2493 E53797N001 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 SO63-2-9036-22CS2677 SO63-3-01CS293 SO63-3-9036-20CS2677 SO63-4-9036-20CS2677 SO63-5-9036-22CS2677 CC1525-000 CTA-0025 D-108-01CS227 D-108-07CS436 D-128-0010 D-141-0108CS404 D-142-51-202-7754 D-144-41CS1371 D-150-0231-NRCS2896 B-801-18-01 515-9 C67137-000 D-436-36CS2908 D-436-37CS2908 D- 436-52CS246 D-436-83CS2705 D-438-0102 LSS-26-8A 427243-000 D-106-2012 D-300-08CS1108 UWCS-2U/7.6-1C/5.8 620026-000 B- 004-00 140945-000 NAS1744-3