C93404 TE Connectivity

Signal Relays AXICOM MT2 Relay n Telecom/signal relay (dry circuit, test access, ringing) n Slim line 20x10mm (.795x.393) n Switching current 2A n 2 form C contacts (2 CO, 2 changeover contacts) n Bifurcated contacts n Meets FCC Part 68 and ITU-T K20 Typical applications Communications equipment, linecard application analog, ISDN, xDSL, PABX, voice over IP, office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment, automotive Equipment Z Approvals Coil Data UL 508 File No. E 111441 Magnetic system neutral Technical data of approved types on request Coil voltage range 3 to 48VDC Max. coil temperature 115C Contact Data Thermal resistance < 85K/W Contact arrangement 2 form C (2 CO) Coil versions, monostable Max. switching voltage 220VDC, 250VAC Coil Rated Operate Limiting Release Coil Rated coil Rated current 2A code voltage voltage Voltage voltage resistance power Limiting continuous current, 85C 2A VDC VDC VDC VDC 10% mW min. max. min. Contact material AgNi, gold-covered High sensitive version, 150mW Contact style bifurcated contacts 00 3 2.1 8.1 0.3 60 150 Min. recommended contact load 10mA at 20mV 07 3.3 2.3 8.8 0.33 72 150 Minimum switching voltage 100V 06 4.5 3.2 12.2 0.45 136 150 Initial contact resistance < 70m at 10mA, 20mV 01 5 3.6 13.5 0.5 168 150 Frequency of operation, without load max. 50 operations/s 27 6 4.3 16.2 0.6 240 150 Operate / release time max. 5ms/3ms 05 9 6.4 24.3 0.9 544 150 Bounce time max. 5ms 02 12 8.6 32.4 1.2 968 150 Electrical endurance 03 24 17.1 64.8 2.4 3872 150 6 contact application 0 (30mV/10mA) min. 5x10 operations 04 48 34.1 129.6 4.8 15468 150 6 cable load open end min. 2.5x10 operations Sensitive version, 200mW 5 resistive load 150V/0.2A - 30W min. 2x10 operations 14 3 2 7 0.3 45 200 5 24V/1.25A - 30W min. 2x10 operations 15 4.5 2.9 10.5 0.45 101 200 Contact ratings, UL 16 5 3.3 11.6 0.5 125 200 N.O./N.C. Contacts - 0.4 A at 125 V ac, resistive 28 6 3.9 14 0.6 180 200 1.25 A at 24 V dc 17 9 5.9 21 0.9 405 200 2 A at 30 V dc 18 12 7.8 28 1.2 720 200 These ratings are for same polarity between poles. 19 24 15.6 59.9 2.4 2880 200 6 Mechanical endurance typ. 100x10 operations 20 48 31.2 112 4.8 11520 200 Sensitive version, 300mW 33 4.5 3.1 8.9 0.45 73 300 Max. DC load breaking capacity 34 5 3.4 9.9 0.5 90 300 12 12 8.25 23.6 1.2 515 300 35 24 16.5 47.3 2.4 2060 300 36 48 32.5 54.6 4.8 8240 300 Standard version, 400mW 21 4.5 2.9 8.9 0.45 50 400 22 5 3.3 9.9 0.5 63 400 29 6 3.9 11.8 0.6 90 400 23 9 5.9 17.7 0.9 203 400 24 12 7.8 23.6 1.2 360 400 25 24 15.6 47.3 2.4 1440 400 26 48 31.2 94.6 4.8 5760 400 Standard version, 550mW 38 4.5 2.9 6.3 0.45 36 550 50 5 3.3 7 0.5 45 550 37 6 3.9 8.4 0.6 66 550 32 12 7.8 16.8 1.2 280 550 31 24 15.6 33.6 2.4 1050 550 30 48 31.2 67.2 4.8 4100 550 All figures are given for coil without pre-energization, at ambient temperature +23C. DC current A Other coil voltages on request. 1 10-2017, Rev. 1017 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company AXICOM Telecom-, Signal and RF Relays 108-98006 Rev. E MT2 Relay Coil Operating Range 3 3.2 200 mW coil 150 mW coil 200 mW 150 mW 2.8 3.0 2.6 2.8 Umax. at 0 A Umax. at 0 A 2.6 2.4 Umax. at 2 x 1 A Umax. at 2 x 1 A 2.4 Umax. at 2 x 2 A Umax. at 2 x 2 A 2.2 2.2 2 2.0 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 1 Unom. nominal coil voltage 1.0 Unom. nominal coil voltage 0.8 0.8 0.6 0.6 Uop. min. Uop. min. 0.4 0.4 Urel. min. Urel. min. 0.2 0.2 0.0 0 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 Ambient Temperature C Ambient Temperature C 3.0 3.0 300 mW coil 400 mW coil 400 mW 300 mW 2.8 2.8 2.6 2.6 Umax. at 0 A 2.4 Umax. at 0 A 2.4 Umax. at 2 x 1 A Umax. at 2 x 1 A 2.2 2.2 Umax. at 2 x 2 A Umax. at 2 x 2 A 2.0 2.0 1.8 1.8 1.6 1.6 1.4 1.4 AXICOM 1.2 1.2 Telecom-, Signal and RF Relays 108-98006 Rev. E 1.0 Unom. nominal coil voltage 1.0 Unom. nominal coil voltage Signal Relays AXICOM 0.8 0.8 MT2 Relay 0.6 0.6 Uop. min. Uop. min. 0.4 0.4 Urel. min. Urel. min. MT2 Relay (Continued) 0.2 0.2 0.0 0.0 Coil Operating Range -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110120 Ambient Temperature C Ambient Temperature C Coil Data (continued) Coil Data (continued) 3 3.2 200 mW coil 3.0 150 mW coil 200 mW 550 mW coil 150 mW U = Nominal coil voltage 550 mW 2.8 nom 3.0 2.8 2.6 2.8 2.6 Umax. at 0 A Umax. at 0 A U = Upper limit of the operative range of the coil voltage (limiting max. 2.6 2.4 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 1 A 2.4 Umax. at 2 x 1 A 2.4 Umax. at 2 x 2 A voltage) when coils are continously energized Umax. at 2 x 2 A 2.2 2.2 Umax. at 2 x 2 A 2.2 2 2.0 AXICOM 2.0 U = Lower limit of the operative range of op. min. 1.8 1.8 1.8 Telecom-, Signal and RF Relays 108-98006 Rev. E the coil voltage (reliable operate voltage) 1.6 1.6 1.6 AXICOM 1.4 1.4 1.4 MT2 Relay 108-98006 Rev. E U = Lower limit of the operative range of Telecom-, Signal and RF Relays 1.2 rel. min. 1.2 1.2 1 Unom. nominal coil voltage the coil voltage (reliable release voltage) 1.0 1.0 Unom. nominal coil voltage Unom. nominal coil voltage MT2 Relay 0.8 0.8 0.8 Coil Operating Range 0.6 0.6 0.6 Uop. min. Uop. min. Uop. min. 0.4 0.4 0.4 Urel. min. Urel. min. Urel. min. 0.2 0.2 0.2 Coil Operating Range 0.0 0 0.0 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 3 3.2 -60-50 -40-30 -20-10 010203200 mW coil0405060708090 100 110 120 150 mW coil 200 mW 150 mW Ambient Temperature C Ambient Temperature C 2.8 Ambient Temperature C 3.0 2.8 2.6 3 3.2 200 mW coil Coil operative range graphs Umax. at 0 A Umax. at 0 A 150 mW coil 200 mW 150 mW 2.6 2.4 2.8 Umax. at 2 x 1 A 3.0 Umax. at 2 x 1 A U Nominal coil voltage nom All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 11 2.4 2.2 Umax. at 2 x 2 A Umax. at 2 x 2 A 2.8 2.3.60 3.0 U Upper limit of the operative range of the coil voltage (limiting Umax. at 0 A300 mW coil max 400 mW coil Umax. at 0 A 2.2 400 mW 300 mW 2 2.6 2.4 2.8 voltage) when coils are continously energized 2.8 Umax. at 2 x 1 A Umax. at 2 x 1 A 2.0 2.4 1.8 Umax. at 2 x 2 A 2.2.26 Umax. at 2 x 2 A U2.6 Lower limit of the operative range of op. min. Umax. at 0 A 1.8 2.2 the coil voltage (reliable operate voltage) 1.6 2.24 Umax. at 0 A 2.4 Umax. at 2 x 1 A AXICOM 1.6 2.0 Umax. at 2 x 1 A U1.4 Lower limit of the operative range of 1.2.82 2.rel. min.2 Umax. at 2 x 2 A 1.4 108-98006 Rev. E Telecom-, Signal and RF Relays 1.8 Umax. at 2 x 2 A the coil voltage (reliable release voltage) 1.2 1.2.60 2.0 1.2 1.6 1 Unom. nominal coil voltage 1.1.48 1.8 1.0 Unom. nominal coil voltage 1.4 MT2 Relay 0.8 1.6 1.6 1.2 0.8 1.2 Insulation Data 0.1.64 1.14 Unom. nominal coil voltage 0.6 Uop. min. 1.0 Unom. nominal coil voltage Uop. min. Initial dielectric strength 1.2 0.1.42 0.0.84 Urel. min. 0.8 Urel. min. between open contacts 750V rms Coil Operating Range 0.1.20 Unom. nominal coil voltage 0.1.20 Unom. nominal coil voltage 0.6 0.6 Uop. min. Uop. min. between contact and coil 1250V 0.0.80 0.08 rms 0.4 0.4 Urel. min. -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 Urel. min. between adjacent contacts 750V 0.6 0.6 rms 0.2 0.2 Ambient Temperature C Ambient Temperature C Uop. min. Uop. min. Initial surge withstand voltage 0.4 0.4 0.0 0 3 Urel. min. Urel. min. 3.2 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 200 mW coil100 110 120 150 mW coil 0.2 0.2between open contacts 1050V 200 mW 150 mW 2.8 Ambient Temperature C 3.0 Ambient Temperature C 0.0 0.0between contact and coil 1750V 2.8 2.6 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110120 3.0 3.0 Umax. at 0 A Umax. at 0 A 300 mW coil between adjacent contacts 400 mW coil 1050V 300 mW 400 mW 2.6 2.4 Ambient Temperature C Ambient Temperature C Umax. at 2 x 1 A 2.8 Umax. at 2 x 1 A 2.8 9 Initial insulation resistance at 500VDC > 10 2.4 Umax. at 2 x 2 A 2.2 Umax. at 2 x 2 A 2.6 2.6 3.0 3.0 400 mW coil Capacitance Umax. at 0 A 300 mW coil 2.2 400 mW 300 mW 2 2.4 2.4 Umax. at 0 A 2.8 2.8 Umax. at 2 x 1 A 3.0 between open contacts max. 2pF 2.0 550 mW coil 1.8 U = Nominal coil voltage Umax. at 2 x 1 550 mWA 2.2 nom 2.2 Umax. at 2 x 2 A 2.6 2.6 2.8 1.8 between contact and coil max. 4pF Umax. at 0 A Umax. at 2 x 2 A 1.6 2.0 2.0 2.4 Umax. at 0 A 2.4 2.6 1.6 Umax. at 2 x 1 A between adjacent contacts max. 2 pF U = Upper limit of the operative range of the coil voltage (limiting 1.4 max. 1.8 Umax. at 0 A 1.8 Umax. at 2 x 1 A 2.2 2.2 Umax. at 2 x 2 A 1.4 2.4 Umax. at 2 x 1 A Umax. at 2 x 2 A 1.2 voltage) when coils are continously energized 1.6 1.6 2.0 2.0 1.2 2.2 Umax. at 2 x 2 A 1 1.4 Unom. nominal coil voltage 1.4 1.1.08 1.8 Unom. nominal coil voltage 2.0 RF Data U = Lower limit of the operative range of 0.8 op. min. 1.2 1.2 0.8 1.6 1.6 1.8 Isolation at 100MHz/900MHz -31.8dB/-14.2dB 0.1.60 1.0 Uthe coil voltage (reliable operate voltage)nom. nominal coil voltage Unom. nominal coil voltage 0.1.64 Uop. min. 1.4 1.6 Uop. min. 0.4 Insertion loss at 100MHz/900MHz -0.02dB/-0.97dB 0.4 0.8 0.8 1.2 Urel. min. 1.2 1.4 Urel. min. U = Lower limit of the operative range of 0.2 V0.oltage standing wave ratio (VSWR)6 0.2 0.6 rel. min. 1.0 Unom. nominal coil voltage 1.0 Unom. nominal coil voltage 1.2 Uop. min. Uop. min. 0.0 0.04 0.4at 100MHz/900MHz 1.03/1.31 0.8 the coil voltage (reliable release voltage) 0.8 1.0 Unom. nominal coil voltage Urel. min. -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 Urel. min. 0.2 0.2 0.6 0.6 0.8 Ambient Temperature C Ambient Temperature C Uop. min. Uop. min. 0.0 0.0 0.4 0.4 0.6 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110120 Uop. min.Urel. min. Urel. min. 0.2 Other Data 0.2 0.4 Ambient Temperature C Urel. min. Ambient Temperature C 0.0 0.0 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 0.2 3.0 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 3.0 -60-50 -40-30 -20-10 0102030405060708090 100 110120 400 mW coil 300 mW coil refer to the Product Compliance Support Center at 0.0 300 mW 400 mW Ambient Temperature C 2.8 2.8 Ambient Temperature C -60-50 -40-30 -20-10 0102030405060708090 100 110 120 3.0 www.te.com/customersupport/rohssupportcenter 550 mW coil U = Nominal coil voltage 2.6 Ambient Temperature C 550 mW nom 2.6 2.8 Umax. at 0 A Ambient temperature -55 to +85C 2.4 2.4 Umax. at 0 A 2.6 Umax. at 2 x 1 A 3.0 Category of environmental protection 550 mW coil U = Upper limit of the operative range of the coil voltage (limiting max. Umax. at 2 x 1 A U = Nominal coil voltage 2.2 550 mW 2.2 UUmax.max. at 2 x 2 at 0 A A nom 2.4 2.8 All specications subject to change. Consult Tyco Electronics for latest specications. IEC 61810 R5 of T III - wash tight11 Umax. at 2 x 2 A Umax. at 2 x 1 A voltage) when coils are continously energized 2.0 2.0 2.2 2.6 Umax. at 2 x 2 A Vibration resistance (functional) 10g, 10 to 500Hz U = Upper limit of the operative range of the coil voltage (limiting 1.8 max. 1.8 Umax. at 0 A 2.0 2.4 U Shock r = Lower limit of the operative range ofesistance (functional) Umax. at 2 x 1 A 1.6 op. min. 1.6 voltage) when coils are continously energized 1.8 2.2 Umax. at 2 x 2 A IEC 60068-2-27 (half sine) 10g/30g 1.4 1.4 the coil voltage (reliable operate voltage) 1.6 2.0 Shock resistance (destructive) 500g U 1.2 = Lower limit of the operative range of 1.2 op. min. 1.4 1.8 U Terminal type = Lower limit of the operative range of PCB-THT 1.0 1.0 Unom. nominal coil voltage rel. min. Unom. nominal coil voltage 1.2 the coil voltage (reliable operate voltage) 1.6 Weight max. 5g 0.8 0.8 the coil voltage (reliable release voltage) 1.0 Unom. nominal coil voltage 1.4 0.6 0.6 Resistance to soldering heat THT U = Lower limit of the operative range of rel. min. 0.8 1.2 Uop. min. Uop. min. 0.4 0.4 IEC 60068-2-20 265 C / 10 s 0.6 the coil voltage (reliable release voltage) 1.0 Urel. min. Unom. nominal coil voltage Urel. min. Uop. min. 0.2 0.2 Ultrasonic cleaning not recommended 0.4 0.8 Urel. min. 0.0 0.0 0.2 Packaging unit 1000 pcs. 0.6 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 -60-50 -40-30 -20-10 0102030405060708090 100 110120 Uop. min. 0.0 0.4 Ambient Temperature C Ambient Temperature C Urel. min. -60-50 -40-30 -20-10 0102030405060708090 100 110 120 0.2 Ambient Temperature C 0.0 3.0 -60-50 -40-30 -20-10 0102030405060708090 100 110 120 550 mW coil U = Nominal coil voltage 550 mW nom Ambient Temperature C 2.8 All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 11 2.6 U = Upper limit of the operative range of the coil voltage (limiting 2 max. Umax. at 0 A 2.4 10-2017, Rev. 1017 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - All specications subject to change. Consult TUyco Electronics for latest specications.max. at 2 x 1 A 5 of 11 voltage) when coils are continously energized 2.2 Umax. at 2 x 2 A www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2.0 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. U = Lower limit of the operative range of op. min. 1.8 a TE Connectivity Ltd. company