CUSTOMER DRAWING 1 3 2 3 4 Product Dimensions Cable Dimensions Color Product Ident. Code L1.75 B C D E F G Name Code (CL) L0.075 min min max max min min 16.50 1.90 2.67 1.90 2.67 0.90 0.50 S200-1-W2-GA-CL S2001R 9 0.650 0.075 0.105 0.075 0.105 0.035 0.020 16.50 2.67 3.68 2.67 3.68 1.40 0.75 S200-2-W2-GA-CL S2002R 9 0.650 0.105 0.145 0.105 0.145 0.055 0.030 16.50 4.32 5.08 4.32 5.08 2.15 1.25 S200-3-W2-GA-CL S2003R 9 0.650 0.170 0.200 0.170 0.200 0.085 0.050 19.10 5.97 6.48 5.97 6.48 3.30 1.80 S200-4-W2-GA-CL S2004R 9 0.750 0.235 0.255 0.235 0.255 0.130 0.070 19.10 6.98 7.62 6.98 7.62 4.30 2.50 S200-5-W2-GA-CL S2005R 9 0.750 0.275 0.300 0.275 0.300 0.170 0.100 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. THERMAL INDICATOR: Fusible ring. 3. MELTABLE RINGS: Environment resistant modified thermoplastic fluoropolymer. Color: light blue. 4. PRE-INSTALLED LEAD: Stranded nickel-plated copper wire in accordance with SAE-AS22759/87. Color: see table. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150 C minimum, meeting the dimensional criteria listed, having silver or nickel-plated shields and insulations compatible with the insert material. 2. Install using TE Connectivity-approved convection or infrared heating tools in accordance with TE Connectivity process standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets. 3. Parts shall be marked with identification code per table. 4. Temperature range: -65 C to +200 C. 5. For best results, prepare the cable as shown: Part Number Guide: S200-X-W2-GA-CL Lead color per MIL-STD-681 Lead AWG. Check for availability. Lead type AS22759/87 (RCW5987) Size 1 to 5 G is the minimum diameter on which the sleeve will seal. TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks TITLE: SOLDERSLEEVE SHIELD TERMINATOR WITH LEADS, IMMERSION RESISTANT, 200 DEG C, ROHS COMPLIANT Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.: Raychem Inches dimensions are shown in brackets Devices S200-X-W2-GA-CL TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to 0.00 N/A amend this drawing at any time. Revision : Issue Date : 0.0 N/A ROUGHNESS Users should evaluate the suitability April 2020 0 N/A IN MICRON of the product for their application. D DRAWN BY: CAGE CODE: DATE: SCALE: SIZE: SHEET: ECO: ECO-20-004961 P.TALLY 06090 NTS A 1 of 1 April 16, 2020 2020 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : D-260-C-A 899170-000 620040N001 620069N003 620263N004 CTA-0050-01 629624-000 6501390002 CX0781-000 CX0782-000 696396-000 697080-000 715325N001 FLX40-030-02-CS8652 D-436-38CS2908 CB0213-000 CB0219-000 274384-000 285343-000 970053-000 ST18-2-00 FLX40-020-04-CS8651 317035-000 325534-000 D-100-00-WOTI D-150-1011 395947-000 427243N001 C03534- 000 CB0220-000 D44133N001 477436-000 451893-000 931289-000 162583-000 585769N001 610001N004 6200060004 622041N003 626167-000 EG3678-000 650075N002 6500820003 6500850004 650126N010 650127N005 146201-000 7400720001 CA3200N001 82-A2