CGPE-105-3/8-0-SP TE Connectivity

CGPE - 105 Flexible, Commercial Grade, Polyolefin, Heat - Shrinkable Tubing Table 1: Dimensions As Supplied Recovered Inside Diameter Inside Diameter Wall Thickness (W) Size Minimum (D) Maximum (d) Minimum Maximum Nominal in. mm in. mm in. mm in. mm in. mm 3/64 .046 1.17 .023 0.58 .013 0.33 .019 0.48 .016 0.40 1/16 .063 1.60 .031 0.79 .014 0.35 .020 0.50 .017 0.43 3/32 .093 2.36 .046 1.17 .017 0.43 .023 0.58 .020 0.50 1/8 .125 3.17 .062 1.57 .017 0.43 .023 0.58 .020 0.50 3/16 .187 4.74 .093 2.36 .017 0.43 .023 0.58 .020 0.50 1/4 .250 6.35 .125 3.17 .022 0.56 .028 0.71 .025 0.64 3/8 .375 9.50 .187 4.74 .022 0.56 .028 0.71 .025 0.64 1/2 .500 12.70 .250 6.35 .022 0.56 .028 0.71 .025 0.64 3/4 .750 .375 .027 .033 .030 19.05 9.50 0.69 0.84 0.76 1 1.000 25.40 .500 12.70 .030 0.76 .040 1.01 .035 0.88 1-1/2 1.500 38.10 .750 19.05 .034 0.86 .046 1.17 .040 1.01 2 2.000 50.80 1.000 25.40 .038 0.96 .052 1.32 .045 1.14 CUSTOMER DRAWING Raychem Title: CGPE - 105 Tubing Flexible, Commercial Grade, Polyolefin, Heat - Shrinkable Tubing Tyco Electronics reserves the right to amend this drawing at any Document No : time. Users should evaluate the suitability of the product for their CGPE-105 application Cage Code: Scale: Size: Rev. Date: Rev.: Sheet: 06090 None A 21-Jun13 D 1 of 2 2013 Tyco Electronics Corporation. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. Table 2: Properties 1 Property Unit Requirements Test Method *Dimensions Inches Table 1 ASTM D 2671 *Tensile Strength psi 1800 minimum ASTM D 2671 20 in./min. *Ultimate Elongation Percent 200 minimum ASTM D 2671 20 in./min. *Longitudinal Change Percent 0 to -10 ASTM D 2671 Secant Modulus psi 25,000 maximum ASTM D 2671 Specific Gravity -- 1.0 maximum ASTM D 792 -- No Cracking ASTM D 2671 Low Temperature Flexibility, 4 hr./-70 C Procedure C Followed by mandrel bend (Use mandrels sizes per TUS-30-3019) -- No Dripping, Flowing or ASTM D 2671 *Heat Shock, 4 hr./200 C Cracking Followed by visual inspection Corrosion, Copper Contact -- No Pitting or Blackening ASTM D 2671 16 hr./125 C of Copper Procedure B Heat Resistance, 168 hr./125 C ASTM D 2671 Percent 100 minimum 20 in./min. Followed by Ultimate Elongation Dielectric Strength V/mil 500 minimum ASTM D 2671 *Acceptance Test 1) When testing requiring fully recovered specimens, recover the specimens for 3 minutes 200C. CUSTOMER DRAWING Rev. Date: Rev.: Document No. Sheet: 21-Jun-13 D 2 of 2 CGPE-105 If this document is printed it becomes uncontrolled. Check for the latest revision.