CH1171-000 TE Connectivity

ASSY USED ON: CODE 40 - BRAID TAIL BACKSHELL 208M916-19B08 SERIES DASH NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 2 ENTRY SIZE (TABLE 2) NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-208M912-19B08). 4. WHEN ENTRY SIZE EXCEEDSMAX ENTR, A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-DTL-38999 SERIES III & IV, CLASS C, F, K AND W, D38999/20, /24, /26, /40, /46, /47 CONNECTORS AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PAR. 3.5.7. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 12/06/2015 NOT TO CHECKED 12/06/2015 SCALE BRAID TAIL BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 10/07/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 16/07/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES III & IV M 06/04/2014 I.M REVISED PER ECO-14-008400 N REVISED PER ECO-15-010349 16/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 208M9XX N 1 POLAMCO/TE CAGE CODE: U5792ASSY USED ON: IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 H W 16,80 0,50 SILICONE T M O-RING SILICONE SILICONE O-RING O-RING PART MARK PART MARK HERE HERE 4 Z Y TINNED COPPER SHIELD 90 BACKSHELL - TYPE 2 90 BACKSHELL - TYPE 1 H W 16,80 0,50 T M 90 BACKSHELL - TYPE 1 90 BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 12/06/2015 NOT TO CHECKED 12/06/2015 SCALE BRAID TAIL BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 10/07/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 16/07/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES III & IV M 06/04/2014 I.M REVISED PER ECO-14-008400 N REVISED PER ECO-15-010349 16/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 208M9XX N 2 POLAMCO/TE CAGE CODE: U5792 B A THREAD XXXX 152,4 MIN E 152,4 MIN E K B A THREAD XXXX 152,4 MIN J 152,4 MIN J