55PC6159 SPECIFICATION CONTROL DRAWING TITLE Date Revision ONE CONDUCTOR CABLE, DOUBLE SHIELDED, 04-26-00 DOUBLE JACKETED, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55PC. COMPONENT WIRE - 55PC0113 SHIELDS - NICKEL-COATED COPPER JACKETS - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS 1ST JACKET WEIGHT 2ND JACKET DIAMETER 1ST 2ND THICKNESS (in.) THICKNESS (in.) ( in.) ( lbs/1000 ft. ) CONDUCTOR SHIELD SHIELD PART NUMBER LOWER LOWER LOWER UPPER UPPER SIZE SIZE SIZE TARGET TARGET TARGET TARGET SPEC SPEC SPEC SPEC SPEC (AWG) (AWG) (AWG) VALUE WALL VALUE WALL LIMIT LIMIT LIMIT LIMIT LIMIT 55PC6159-24-* 24 38 .0040 .0050 38 .0100 .100 .106 11.00 11.92 .0080 .094 55PC6159-22-* 22 38 .0040 .0050 38 .0080 .0100 .100 .106 .112 12.74 13.75 55PC6159-20-* 20 .0040 .0050 38 .114 .120 38 .0080 .0100 .108 15.30 16.43 55PC6159-18-* 18 38 .0040 .0050 38 .0080 .0100 .123 .129 18.79 20.09 .117 55PC6159-16-* 16 38 .0040 .0050 38 .0080 .0100 .125 .131 .137 21.59 23.02 CABLE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C SHIELD COVERAGE: 85% (minimum) 1st shield, Maximum continuous conductor temperature 95% (nominal) for 2nd shield VOLTAGE RATING: 600 volts (rms) VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL): 1000 volts (rms), 60 Hz, 1 minute CROSSLINK VERIFICATION: 300 3C for 1 hour DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz, conductor to conductor & shield 500 volts (rms), 60 Hz, shield to shield PART NUMBER: JACKET COLOR: White preferred The in the part numbers above shall be replaced by color code JACKET ELONGATION AND TENSILE STRENGTH: designators with a slash separating the component wire colors, a dash Elongation, 50% (minimum) (each) separating the component wire colors from the inner jacket color and a Tensile Strength, 5000 lbf/in (minimum) (each) dash separating the inner jacket color from the outer jacket color. JACKET FLAWS: Example: AWG 22, white component wire white inner jacket and white Spark Test, 1000 volts (rms), 100% test outer jacket: 55PC6159-22-9-9-9 Impulse Dielectric Test, 6.0 kV (peak), 100 % test COLOR AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. 300 Constitution Drive THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Page 1 of 1 Menlo Park, California 94025 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-2 Raychem Fax: 1-650-361-6297X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Hook-up Wire category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 002333-000 M81044/12-22-6 M81044/9-8-9 743094-001 81044/12-18-9CS3209 8538-009-1000 ATFC0311-20-5D EF5675-000 BFWUL3239-24-PINK 22759/34-16-9CS2621 22759/42-24-9CS2620 933205-000 284711-000 961473-000 30802-009-250 30808-010-500 30810-010-500 99M0111-20-2 A00594-000 190571-000 22759/41-12-9CS2620 22759/41-16-9CS2620 22759/43-10-9CS2873 265925-000 CM9524-000 CMC-0553-1-9 31510-010-250 31514-009-500 32412-009-500 34401-010-250 34402-010-500 M81044/9-4-9 391441-BK007 400R0111-10-9 431660-000 ATFC0311-20-0 ATFC0311-20-3 44/7024-26-9-9 44A0112-22-9CS3184 456157-000 BFW-UL3239-24- WHITE 55/0312-26-6L-CS2570 55A0811-12-9 55A6087-20-9-9-9 55A6315-22-9-9CS2632 55A7400-22-9/96-9CS2275 55A9002-30-5 55PC0211-20-5CS2502 55PC0811-6-9CS2637 55PC1211-22-9-9CS3278