SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Name A B C L E F F M N min. max. min. max. max. min. max. min. max. D-153-6001* A 9.0 25.0 12.7 58.0 9.0 5.0 8.4 10.0 35.0 (0.355) (0.985) (0.500) (2.285) (0.355) (0.195) (0.330) (0.395) (1.380) D-153-6002* A 12.0 25.0 17.7 68.0 12.0 7.0 11.4 10.0 35.0 (0.470) (0.985) (0.695) (2.700) (0.470) (0.275) (0.450) (0.395) (1.380) D-153-6003 A 15.0 47.0 12.7 81.0 15.0 10.2 14.3 12.5 52.0 (0.590) (1.185) (0.500) (3.200) (0.590) (0.400) (0.560) (0.490) (2.050) D-153-6004 A 18.0 47.0 12.7 81.0 18.0 12.3 17.0 12.5 52.0 (0.705) (1.185) (0.500) (3.200) (0.705) (0.485) (0.670) (0.490) (2.050) D-153-6005 A 21.0 59.0 12.7 94.0 21.0 14.7 19.8 15.0 63.0 (0.825) (2.320) (0.500) (3.700) (0.825) (0.580) (0.780) (0.590) (2.480) D-153-6006 A 25.0 59.0 12.7 94.0 25.0 17.5 23.7 15.0 63.0 (0.985) (2.320) (0.500) (3.700) (0.985) (0.690) (0.935) (0.590) (2.480) D-153-6007 A 30.0 59.0 12.7 94.0 30.0 21.0 28.6 15.0 63.0 (1.180) (2.320) (0.500) (3.700) (1.180) (0.820) (1.125) (0.590) (2.480) * Parts without item (3). MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin high density. 2. SHIELD: Solder impregnated, flux coated, tin plated copper braid. SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. APPLICATION 1. These parts are designed to provide an in-line splice between the shield of cables, rated for 125C minimum, meeting the dimensional criteria listed, having tin, silver or nickel plated copper shields. 2. Temperature range: -55C to +135C. Install using Raychem-approved convection heating tools. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. TITLE: Raychem Corporation THERMOFIT Raychem 300 Constitution Drive SOLDERSHIELD* SPLICE DEVICES Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: D-153-60XX INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D981019 D15360XX 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 06/15/98 SEE TABLE 1 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : CTC-0062-20-9/5-9 CTC-0062-22-9/5-9 650076N001 680441-000 D-150-0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 982127- 1 D-436-0127CS391 D-436-0182CS246 D-436-37CS2651 D-436-58CS246 D-436-61CS246 D-436-82-CS2621 D-659-0087 D-750- 0005CS2493 E53797N001 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 SO63-2-9036-22CS2677 SO63-3-01CS293 SO63-3-9036- 20CS2677 SO63-3-9036-22CS2677 SO63-4-9036-20CS2677 SO63-5-9036-22CS2677 CC1525-000 CTA-0025 CTA-0025CS072 D-108- 01CS227 D-108-07CS436 D-128-0010 D-141-0108CS404 D-142-51-202-7754 D-144-41CS1371 D-150-0231-NRCS2896 B-801-18-01 B- 801-58 515-9 C67137-000 D-436-36CS2908 D-436-37CS2908 D-436-52CS246 D-436-83CS2705 D-438-0102 LSS-26-8A 427243-000 D- 106-2012 D-300-08CS1108 UWCS-2U/7.6-1C/5.8