D22213-000 TE Connectivity

ASSY USED ON: TINEL LOCK RING 3 CODE 54 - TINEL-LOCK BACKSHELL TXR54AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR54AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468 7. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406 MS3424, MS3446, MS3464, MS3467, MS3468, MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & II, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /39, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 8. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 01/12/2014 NOT TO CHECKED 01/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III K 13.02.15 H.SMITH REVISED PER ECO-15-002312 L REVISED PER ECO-17-009011 21.06.17 D.JONES TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR54 L 1 POLAMCO/TE CAGE CODE: U5792G D ASSY USED ON: ALTERNATIVE IF MAX ENTRY IS EXCEEDED BACKSHELL PROFILE WILL BE SUPPLIED AS TYPE 2 ALTERNATIVE PROFILE 16,80 0,50 26,50 25,50 STAINLESS STEEL TEETH VIEW PART MARK PART MARK HERE 5 HERE STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 C 16,80 0,50 F 45 BACKSHELL - TYPE 2 45 BACKSHELL - TYPE 1 H W 16,80 0,50 M T 90 BACKSHELL - TYPE 1 90 BACKSHELL - TYPE 2 H W 16,80 0,50 M T 90 BACKSHELL - TYPE 1 90 BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 01/12/2014 NOT TO CHECKED 01/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III K 13.02.15 H.SMITH REVISED PER ECO-15-002312 L REVISED PER ECO-17-009011 21.06.17 D.JONES TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR54 L 2 POLAMCO/TE CAGE CODE: U5792 XXXX B A THREAD XXXX E Z E S Y K B A THREAD J J