D42180-000 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Qty: Product A B L D E F G H0.5 J0.5 Item 2 Name min min max max min min max 0.020 0.020 2.5 3.0 24.5 3.0 1.5 1.0 2.5 6.0 7.0 A 1 B-155-03 0.098 0.118 0.964 0.118 0.059 0.039 0.098 0.236 0.275 4.3 4.8 29.3 4.8 2.0 1.5 4.3 8.0 9.0 B-155-05 A 1 0.169 0.189 1.153 0.189 0.078 0.059 0.169 0.315 0.354 6.0 6.70 32.00 6.70 3.30 2.80 6.00 9.0 10.0 B-155-06 A 1 0.236 0.264 1.260 0.264 0.130 0.110 0.236 0.354 0.394 6.8 7.3 32.5 7.3 3.3 2.8 6.8 10.0 11.0 A 1 B-155-07 0.267 0.287 1.279 0.287 0.130 0.110 0.267 0.393) 0.433 8.70 9.20 35.50 9.20 4.50 4.00 8.70 11.0 12.0 A 2 B-155-09 0.343 0.362 1.398 0.362 0.177 0.157 0.343 0.433 0.472 10.8 11.5 35.5 11.5 4.5 4.0 10.8 12.0 13.0 B-155-11 A 2 0.425 0.452 1.397 0.452 0.177 0.157 0.425 0.472 0.512 13.0 15.1 45.5 15.1 7.0 6.5 13.0 16.0 17.0 B-155-13 A 3 0.512 0.594 1.790 0.594 0.275 0.256 0.512 0.630 0.669 17.0 19.0 55.5 18.0 9.0 8.0 16.0 21.0 23.0 A 2 B-155-17 0.669 0.748 2.165 0.748 0.354 0.315 0.630 0.827 0.905 22.5 24.5 80.0 23.5 12.0 11.0 21.5 29.0 31.0 B-155-23 A 2 0.885 0.964 3.149 0.925 0.472 0.433 0.846 1.142 1.220 33.0 35.0 80.0 34.0 19.0 17.0 32.0 29.0 31.0 B-155-33 A 3 1.299 1.380 3.149 1.338 0.748 0.689 1.259 1.142 1.220 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX. Qty: see table (one solder washer shown). SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85C. 2. Temperature range: -55C to +125C. 3. When installed properly, it will meet the performance requirements of TE Connectivity / Raychem Specification RT-1404. 4. For installation procedure and application equipment, consult RPIP-688-00. For best results, prepare The cable as shown: TITLE: TE Connectivity SOLDERSLEEVE DEVICE, LEAD-FREE Raychem 300 Constitution Drive, LOW-FIRE-HAZARD SHIELD Menlo Park, CA. 94025, U.S.A. TERMINATION LOW TEMPERATURE DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets B-155-XX TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should evaluate PROD. REV.: DOC. ISSUE: DATE: 0.0 N/A ROUGHNESS IN the suitability of the product for their SEE TABLE 2 15-Apr-11 0 N/A MICRON application. PREPARED BY: DCR NUMBER: REPLACES: CAGE CODE : SCALE: SIZE: SHEET: mforonda D050170 --- 06090 --- A 1 of 1 Print Date: 9-May-11 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : D-260-C-A 899170-000 620040N001 620069N003 620263N004 CTA-0050-01 629624-000 6501390002 CX0781-000 CX0782-000 696396-000 697080-000 715325N001 FLX40-030-02-CS8652 908357N001 CB0213-000 CB0219-000 274384-000 285343-000 970053- 000 ST18-2-00 FLX40-020-04-CS8651 317035-000 325534-000 D-100-00-WOTI D-150-1011 395947-000 427243N001 514535-000 C03534-000 CB0220-000 D44133N001 626168-000 451893-000 931289-000 162583-000 585769N001 610001N004 6200060004 622041N003 626167-000 EG3678-000 650075N002 6500820003 6500850004 650126N010 650127N005 146201-000 7400720001 CA3200N001