D-436-0114 TE Connectivity

CUSTOMER DRAWING 2.24 (.088) MIN 27.941.52 (1.100.059) 5 PLACES 6.9 MIN 8.25 MIN (.272 MIN) (.325 MIN) 21 7.000.13 B A MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. MELTABLE INSERT: Low outgassing immersion resistant thermoplastic, color-natural. 3. MULTI-HOLE INSERT: Low outgassing immersion resistant thermoplastic, color-natural. 4. STUB SPLICE: Base Metal: Copper Alloy 102 per ASTM B-75. Plating: Ductile Nickel per QQ-N-290. APPLICATION 1. This part is designed to provide immersion resistant stub splice of multi-conductor cable containing up to 5 wires, 2.16 (0.85) max or 10 wires 1.12 (0.044) max or in-line splices having up to 5 wires, 2.16 (0.085) max or 10 wires 1.12 (0.044) max. on one side and one wire on the other. The diameter of the single wire in the splice shall not be less than 3.18 (.125). 2. Temperature rating: -65C to +175C continuous. 3. Sleeves may be installed by convection heating, crimps use Raychem AD-1377 tool. Dimensions of Stub Splicer: Part Name Prod. CMA Range A B Color Code Rev. D-436-0113 A 779 - 2680 1.700.05 (0.0670.002) 2.620.05 (0.1030.002) Blue D-436-0114 A 1900 - 6755 2.540.05 (0.1000.002) 3.810.08 (0.1500.003) Yellow 2013 TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. TITLE : Raychem (5 at 2.24 (0.088) Devices STUB SPLICE SEALING SYSTEM, MULTI-WIRE with SEPARATE INSERT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: D-436-0113/-0114 INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this REVISED PER ECO: REPLACES: 0.00 N/A drawing at any time. Users should evaluate 13-015428 N/A 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. REVISION: SCALE: SIZE: SHEET: T. NGUYEN October-02-2013 SEE TABLE B2 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.