12mm Rotary Encoder with LED Type DPL12 Series Key Features 12mm rotary encoder Incremental type Push on switch option Various shaft lengths LED color options Detent options Applications Power supplies Inverters Servo systems Electrical systems in difficult environments 12mm rotary incremental encoder with LED for use in electronic equipment. Can be supplied with or without switch with customization to standard options. Characteristics - Electrical Pulses: 24 Contact Rating: 0.5mA 5V DC Dielectric Strength: 300VAC / 1mA, 1 minute Insulation Resistance (min): 100M at 250VAC Operating Speed (RPM): 60 RPM Switch Power Rating (where fitted): 5V DC 10mA Switch Contact Resistance: 100m max Electrical Travel: Continuous Rotational Noise: t2 = 2.0ms max (see below) Chattering: t1 & t3 = 3.0ms max (see below) Code Off area V = 3.5V or more. Code on area V=1.5V or less LED Switch - Dual color - see below for characteristics No Switch - Single color - see below for characteristics Color options No Switch - White, Red, Green, Blue Switch - 1: Blue/Green, 2: Blue/Orange, 3: Green/Red Characteristics - Mechanical Output Signal Format Total Mechanical Travel: Continuous Shaft Signal Format Rotational Detents: 0, 24 Direction Switch Operating Force: 400+/- 200gf Switch Travel: 0.5mm A (Terminal A-C) Shaft Type: F - Flatted, K - Knurled Clockwise Shaft Length See chart below (from Mounting Surface): B (Terminal B-C) Characteristics - Environmental Operating Temperature: -40 to +85C Rotational Life: 30,000 cycles A (Terminal A-C) Anticlockwise Soldering Condition Manual Soldering - Bit temperature 300C or less B (Terminal B-C) Application time 3 seconds max. Dip Soldering - Preheating - Surface temperature of board 100C or less - preheating time < 1 minute Soldering - Solder temperature 260 +/-5C Immersion time 3 +/-1 second 1-1773449-0 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change.12mm Rotary Encoder with LED Type DPL12 Series LED Characteristics - Without Switch Reverse Current: IR = 10uA Reverse Voltage: 5V Operating Temperature: -40 to +85C Forward Voltage Emitted Power DC Forward Color Dissipation Current Typical Max. White 100mW 20mA 3.3V 4.0V Blue 100mW 20mA 3.2V 4.0V Red 58mW 25mA 1.8V 2.3V Green 48mW 20mA 2.0V 2.4V LED Characteristics - With Switch Reverse Current: IR = 10uA Reverse Voltage: 5V Operating Temperature: -40 to +85C Forward Voltage Emitted Power DC Forward Peak Forward Color Dissipation Current Current Typical Max. Red 170mW 30mA 185mA 1.95V 2.5V Orange 75mW 30mA 195mA 2.1V 2.5V Blue 105mW 30mA 150mA 3.3V 4.0V Green 105mW 25mA 130mA 3.1V 3.8V Dimensions - DPL12V Dimensions - DPL12H 1-1773449-0 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change.