DS13-1Y TE Connectivity

Kilovac Solid State Relays DS13 SSR for loads up to 2A 60Vdc Product Facts n Standard options: short circuit/overload protection and control status. n Optically coupled all solid state relay. n TTL & CMOS compatible input. n Low on-resistance power MOSFET output. DS13 series SSRs employ circuit protection and a control status provides a n Tested per MIL-PRF-28750D state of the art photovoltaic separate input control built-in test function which and approved to DSCC optical isolation and power status line. The overload provides a logic 0 when drawing 90091. MOSFET output chips for feature provides protection the input circuit is energized n All versions available with ultra-reliable high speed of the relay, load and load and functional. The relay is Tyco Electronics W level switching of DC loads up circuit wiring in the event of packaged into a custom screening for Kilovac to 2 amps, with low on- a sustained current over- hermetically sealed low- relays. resistance. Standard load or short circuit while profile 8-pin ceramic DIP options include integral the relay is on or when it is package, with through hole current overload/short turned on into a short. The or surface mount pins. Kilovac Part No. DSCC Dwg. No. Relay Version DS13-1Y 90091-008 Basic relay DS13-1000 90091-004 Relay w/ short circuit protection DS13-1001 90091-006 Relay w/ control status DS13-1002 90091-002 Relay w/ short circuit protection and control status Notes: Add suffix S to part number for surface mount versions. Add suffix T to part number for tinned leads. Add suffix W to part number for lower screening level. 2 Terminal Input Configuration Direct Drive TTL Drive S1 R Series (+) Output R Series (+) Output Vcc Load V Load Vcc Load V Load 1 4 1 4 2 Control 2 Control 8 5 5 8 Return Load Return Load Load Return Load (-) Output Return (-) Output O C TTL 3 Terminal Input Configuration With Status Without Status V Status R Status Vso (+) Output (+) Output Status Load Vcc Load V Vcc V Load Output Load 1 4 1 7 4 2 2 V V Control Control Control Control 5 8 5 8 Return Return Load Load Load Load Return Return (-) Output (-) Output 106 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.Kilovac Solid State Relays Kilovac Solid State Relays DS13 SSR for loads up to 2A 60Vdc (Continued) Environmental Characteristics Electrical Specifications (-55C to +105C unless otherwise specified) Ambient Temperature Range: Operating: -55C to +105C. Input (2 terminal configuration) Storage: -55C to +125C. Input supply voltage range (Vcc) 3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2) Vibration Resistance: Input current (max.) 5Vdc 15mAdc (Notes 1 & 2, Figures 1 & 2) 100 Gs, 10-3,000 Hz. Must turn-on voltage 3.8Vdc Shock Resistance: Must turn-off voltage 1.5Vdc 1,500 Gs, 0.5 ms pulse. Reverse voltage protection -32Vdc Constant Acceleration Resistance: 5,000 Gs. Input (3 terminal configuration) Control voltage range 0 - 18 Vdc Control current (max.) 240Adc 5V, 1mA 18V Input supply voltage range (Vcc) 3.8 - 32 Vdc (Notes 1 & 2, Figures 1 & 2) Input current (max.) 5Vdc 15mAdc (Notes 1 & 2, Figures 1 & 2) Mechanical Characteristics Must turn-on voltage 0.3Vdc Weight (max.): .07 oz. (2 grams) Must turn-off voltage 3.2Vdc 10 Materials: I/O Case: DIP, hermetically sealed, Dielectric Strength (min.) 1,000V rms ceramic 9 Insulation Resistance (min.) 500Vdc 10 ohms Pins: Copper, gold plated Capacitance (max.) 10pF Output Continuous load current (max.) 25C, without short circuit protection 2.0Adc (Figure 5, Note 3) Continuous load current (max.) 25C, with short circuit protection 1.0Adc (Figure 5, Note 3) Continuous load voltage (max.) 60Vdc Transient blocking voltage (max.) 80Vdc (Note 4) On resistance (max.) T = 25C, I = 100ma, with short circuit protection 0.45 ohm (Note 5, Figure 4) j L On resistance (max.) T = 25C, I = 100ma, without short circuit protection 0.22 ohm (Note 5, Figure 4) j L Output voltage drop (max.), with short circuit protection 0.6Vdc Output voltage drop (max.), without short circuit protection 0.75Vdc Off-state leakage current (max.) 60Vdc 100Adc Turn-on time (max.) 1.5 ms (Figure 3) Turn-off time (max.) .25 ms (Figure 3) dv/dt (min.) 100V / s Electrical system spike 600Vdc (Note 4) Junction temperature (max.) 150C Thermal resistance (max.), junction to ambient 80C/W Thermal resistance (max.), junction to case 20C/W Status Status supply voltage 30Vdc Status sink current (max.) Vstatus 0.3Vdc 2mAdc (Note 7) Status leakage current (max.) 15Vdc 4Adc Short Circuit Protection See Figure 6, Note 7 107 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.