D-SCE-1K-4.8-50-S1-4 TE Connectivity

D-SCE Diesel Resistant HEAT SHRINK IDENTIFICATION SYSTEM Technical Datasheet TTDS-017 Revision 7 - October 2016 Fluid Resistant, Heat Shrink Identification Marker Sleeving for the identification of wires and cables. D-SCE is the foremost fluid resistant product used in applications where exposure to lubricant and fuel spray is possible. D-SCE is a thin wall, heat shrink tube, manufactured with e-beam technology that gives users the ability to shrink the supplied tube with no damage to material or printed text. Shrinking the tube will ensure the printed mark has a firm hold on the wire. D-SCE gives market leading print performance when used as a complete system, as recommended by TE Connectivity. Refer to TE document 411-121005 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX for the recommended printer/product/ribbon combinations. Printed sleeves meet the rail specifications NF F 00608 Categories A & H and BS EN50343. The sleeve also meets the material requirements of SAE-AMS-DTL-23053/6 Class 1. D-SCE Heat Shrink Identification Marker Sleeving is available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-017 D-SCE TECHNICAL DATA SHEET D-SCE DIESEL RESISTANT Features Design for Environment Self-extinguishing, non-flame propagating D-SCE fully complies with 2011/65/EU RoHS II directive, and Regulation (EC) number 1907/2006 Resistant to key rail, industrial and military fluids (REACH) (defined by RW-2519) Designed for rugged environments Further information and a downloadable declaration cov- Military grade performance ering RoHS and REACH compliance can be found at the Pre-termination Cable Identification TE Product Compliance Support Centre: Sleeve diameters from 2.4mm to 38.1mm