108-151009 Product 28 JUNE 2017 Rev B4 Specification DT Series Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) DT Series Connector System. 1.2. Qualification When tests are performed on the subject product line, procedures specified in Figure 2 shall be used. All inspections shall be performed using the applicable inspection plan and product drawing. 1.3. Qualification Test Results Successful qualification testing on the subject product line was completed in 1987. The Qualification Test Report number for this testing is 501-151032. This documentation is on file at and available from Engineering Practices and Standards (EPS). 2. APPLICABLE DOCUMENTS AND FORMS The following documents and forms constitute a part of this specification to the extent specified herein. Unless otherwise indicated, the latest edition of the document applies. 2.1. TE Connectivity (TE) Documents 0425-017-0000: DT Series Performance and Application Characteristics 109-1: General Requirements for Testing 114-151000: Application Specification for DEUTSCH Size 16 S&F Pin & Socket 408-151008: Instruction Guide DEUTSCH Removal Tool DT-RT1 501-151032: DT Qualification Test Report Product Drawings X refers to A, B, C, D keys. XXXX refers to product modification. DT13-2P-XXXX DT04-2P-XXXX 2pin Receptacle 2pin Receptacle, 90 Header DT04-3P-XXXX 3pin Receptacle DT13-4P-XXXX 4pin Receptacle, 90 Header DT04-4P-XXXX 4pin Receptacle DT13-6P-XXXX 6pin Receptacle, 90 Header DT04-6P-XXXX 6pin Receptacle DT13-08PX-XXXX 8pin Receptacle, 90 Header DT04-08PX-XXXX 8pin Receptacle DT13-12PX-XXXX 12pin Receptacle, 90 Header DT04-12PX-XXXX 12pin Receptacle DT15-2P-XXXX 2pin Receptacle, 180 Header DT15-3P-XXXX DT06-2S-XXXX 2pin Plug 3pin Receptacle, 180 Header DT06-3S-XXXX 3pin Plug DT15-4P-XXXX 4pin Receptacle, 180 Header DT06-4S-XXXX 4pin Plug DT15-6P-XXXX 6pin Receptacle, 180 Header DT06-6S-XXXX 6pin Plug DT15-08PX-XXXX 8pin Receptacle, 180 Header DT06-08SX-XXXX 8pin Plug DT15-12PX-XXXX 12pin Receptacle, 180 Header DT06-12SX-XXXX 12pin Plug 1011-344-0205 2pin Dust Cap DT16-6SX-XXXX 6pin Plug 3pin Dust Cap 1011-345-0305 DT16-15SX-XXXX 15pin Plug 4pin Dust Cap 1011-346-0405 DT16-18SX-XXXX 18pin Plug 1011-347-0605 6pin Dust Cap 8pin Dust Cap 1011-348-0805 12pin Dust Cap 1011-349-1205 2017 TE Connectivity family of companies This controlled document is subject to change. 1 of 7 All Rights Reserved For latest revision and Regional Customer Service, visit our website at www.te.com Indicates Change PRODUCT INFORMATION 1-800-522-6752 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 108-151009 Wedge Lock PN s sold separately but are required for DT functionality W2P-XXXX 2pin Rcpt Wedge Lock W2SX-XXXX 2pin Plug Wedge Lock W3P-XXXX 3pin Rcpt Wedge Lock W3S-XXXX 3pin Plug Wedge Lock W4P-XXXX 4pin Rcpt Wedge Lock W4SX-XXXX 4pin Plug Wedge Lock W6P-XXXX 6pin Rcpt Wedge Lock W6S-XXXX 6pin Plug Wedge Lock W8P-XXXX 8pin Rcpt Wedge Lock W8S-XXXX 8pin Plug Wedge Lock W12P-XXXX 12pin Rcpt Wedge Lock W12S-XXXX 12pin Plug Wedge Lock 2.2. Industry Documents DIN 40050-9: Road vehicles Degrees of Protection (l P Code) DIN 72551-6: Road VehiclesLow-Tension CablesPart 6: Single-Core, Unscreened with Thin Insulation Wall Dimensions, Materials, Marking EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications IEC-60512: Electronic Equipment - Tests and Measurements IEC-60529: Degrees of Protection Provided by Enclosures (IP Code) ISO 6722: Road Vehicles60 V and 600 V Single-Core CablesDimensions, Test Methods, and Requirements SAE J1128: Low Voltage Primary Cable 3. REQUIREMENTS 3.1. Design and Construction Product shall be of the design, construction, materials and physical dimensions specified on the applicable product drawing. 3.2. Ratings Voltage: 250 VDC Current (Amp): See Figure 1 Wire Size 2 AWG mm Connector Loading 14 16 18 20 2.0 1.0 .80 .50 All Circuits Energized 13.0 13.0 10.0 7.5 Figure 1 Temperature: -55C to +125C Ingress Protection (IP) Level: IP68 and IP6K9K (with rear protection, such as backshell) Flammability: UL Recognized. Parts have been successfully tested to the 20 mm Flame Test per Standard UL-94 Rev B4 2 of 7