DT Family Contents DT Family Overview 18 DTV Series 28 Part Numbering System 18 DTMH Series 29 Dimensions 19 DTMN Series 30 Con gurations 20 How To Instructions 31 Required Components 21-22 Special Modi cations 22-23 Accessories 24-27 17DT Family DT Family Overview Deutsch DT, DTM, and DTP Series environmentally sealed connectors are designed speci cally for cable to cable applications. The DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. The connector may be populated with either solid or stamped & formed style contacts. Contact insertion and removal does not require any special tools. Contacts are retained in locked position by dielectric ngers which are molded as an integral part of the housing. Secondary wedgelocks are assembled at the mating interfaces to ensure contact positioning. The Deutsch DT Series general purpose connectors will provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab. DT Series Overview DTM Series Overview Deutschs DT Series connectors offer eld proven reliability Deutschs DTM Series connectors are the answer to all and rugged quality. The DT design strengths include of your smaller wire gauge applications. Building on optional ange mounting, multi-pin arrangements, the DT design strengths, the DTM connector line was lower cost, and design exibility. The DT Series offers the developed to ll the need for lower amperage, multi- designer the ability to use multiple size 16 contacts, each pin, inexpensive connectors. The DTM Series offers the with 13 amp continuous capacity, within a single shell. designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell. DTP Series Overview Deutschs DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to ll the need for higher amperage, multi-pin, inexpensive connectors. The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin con gurations. DT Family Part Numbering System DT* 06 - 2 S * - XXXX Series Special Modi cations Blank = DT Series M = DTM Series Key (if applicable) P = DTP Series Contacts Style P = Pin 04 = Receptacle S = Socket 06 = Plug Con guration 18 A STEP AHEAD