HS/HC COMPUTERISED HEAT-SHRINK INDENTIFICATION Technical Datasheet TTDS-033 Revision 8 - October 2015 HS/HC Heat shrink markers are a range of flattened tubes arrange for easy printing through a selection of printers, carrier automated, notation on Manufactured using a specially developed radiation cross-linked, flame retarded material. Thin wall, flame retarded radiation cross-linked polyolefin heat-shrinkable tubing, assembled as organized cut sleeves on a paper carrier. HS products are 2:1 shrink ratio. HC products are 3:1 shrink ratio. HS/HC Heat Shrink Identification Marker Sleeving is available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. Laser markable using industrial YAG laser PAGE 1 RAIL /// TTDS-033 HS/HC HEAT-SHRINK IDENTIFICATION HS/HC HEAT-SHRINK IDENTIFICATION Features Temperature Rating HS Available in sizes 2.4 up to 38.1 Operating Temperature 55C to 135C (-67F to 275F). HC Available in sizes 2.4 up to 39.0 Computer based printing system Excellent resistance to common industrial fluids, as described in RW-2539 Applications Design For Environment Pre-Termination wire and cable identification. The compound used for this product meets all current RoHS and REACH legislation. Identification of wire or cable diameters 1.4 to 16mm (0.055 to 0.63 inches). Further information and a downloadable Rail declaration covering RoHS and REACH compliance can be found at the TE Product Military and Aerospace Compliance Support Centre: Electronics, Mass transit and general Industrial uses.