Specification Control EPD-RWC-23377 R Drawing 4 conductor cable Issue A - 5/21/2014 Identification, colors & marks Cross section A 9 A A 5 0 A 2 Components ID Quantity Part number Description A 4 55A0114-26 Primary wire Cable Outer Description Thickness OD Inches mm Inches mm Core 0.077 1.96 Shield Round silver copper 38 awg regular 0.009 0.22 0.094 2.39 Jacket Thermorad HTF black 0.021 0.53 0.136 3.46 Cable OD tolerance + 0.018 + 0.46 Specification Raychem WCD 51/367 Weight 15.66 lb/kft 23.35 Kg/Km Page 1 of 2 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser 5 RWC 8/7/95Specification Control EPD-RWC-23377 R Drawing 4 conductor cable Issue A - 5/21/2014 Continued Physical properties Component Sequence The placing of the components in the cross sectional view of the cable is for reference only and is not a requirement Notes Color code designators shall be in accordance with MIL-STD-681. Colors Dimensions Dimensions are in inches, and unless otherwise designated, are nominal. Export License Note The information contained on this drawing may be subject to International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR) controls and may not be disclosed to any foreign person or firm, including foreign persons employed by or associated with your firm, without first complying with all requirements for obtaining an export license if applicable. Identification, Colors & Marks The following is the key to the descriptions in the left hand view of the cable on Page 1. Line 1: Identifies the component per the components ID list. Line 2: Color codes. Line 3: Mark on component mark on component jacket. Minimum length Cable will be supplied in 50 ft. minimum lengths unless otherwise specified. Part Number Note Other codes and suffixes may be added to the Part Number as necessary, to capture any additional requirements imposed by the purchase order Specification Information This drawing is the property of Tyco Electronics Corporation and may not be used for any purpose other than for that which it is supplied without the express written authority of Tyco Electronics Corporation. Trademarks Raychem, Thermorad , TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Mark: KULITE. Jacket identification Page 2 of 2 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser 5 RWC 8/7/95