Relay Product Group General Purpose Relays Power Latching Relay EW80 n 1 pole 80A, 1 form A (NO) contact n Polarized bistable (latching), single coil version n Shunt implementation optional n Various terminal configurations Typical applications Electricity meters, pre-paid power meters Z Approvals Insulation Data UL E58304 CQC 09002031473 Initial dielectric strength between open contacts 1500V rms between contact and coil 4000V rms Contact Data Initial surge withstand voltage Contact arrangement 1 form A (NO) between contact and coil 10000V (1.2/50s) Rated voltage 250VAC Clearance/creepage Max. switching voltage 440VAC between contact and coil 6/9mm Rated current 80A Material group of insulation parts IIIa Breaking capacity max. 20kVA Tracking index of relay base PTI 175V Contact material AgSnO 2 Initial voltage drop 80mV 80A -1 Frequency of operation with/without load 360/3600h Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at Contact ratings - UL508 www.te.com/customersupport/rohssupportcenter Load Cycles Ambient temperature -40 to 70C 3 80A, 250VAC, resistive, 70C 10 Category of environmental protection 3 TV-20, 120VAC, 70C 25x10 IEC 61810 RTI (dust protected) 1) Vibration resistance (functional) 1.5mm double amplitude 6 Mechanical endurance 10 Shock resistance (functional) 50g Shock resistance (destructive) 100g Terminal type Lugs and PC terminals Coil Data Weight 40g Magnetic system polarized, bistable (latching) Packaging/unit tray/25 pcs., box/100 pcs. 1) 10...55Hz Coil voltage range 5 to 24VDC Min./Max. energization duration 100ms/1min at <10% duty factor Coil versions, bistable 1 coil Coil Rated Set Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC 10% W B005 5 4 4 25 1 B006 6 4.8 4.8 36 1 B009 9 7.2 7.2 81 1 B012 12 9.6 9.6 144 1 B024 24 19.2 19.2 576 1 All figures are given for coil without preenergization, at ambient temperature +23C Max. coil power: 130% of rated coil power Other coil voltages on request Coil operation coil terminals A1 A2 Pull-in - + Reset + - Contact position not defined at delivery 1 03-2013, Rev. 0313 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2013 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company Relay Product Group General Purpose Relays Power Latching Relay EW80 (Continued) Dimensions Vertical version, straight terminals Contact terminals: A: 11x1.0mm B: 11x1.2mm Coil terminals: 0.6 x0.6mm * auxiliary solder point 0.6 x1.0 Horizontal version, straight terminals Contact terminals: A: 11x1.0mm B: 11x1.2mm Coil terminals: 0.6 x0.6mm * auxiliary solder point 0.6 x1.0 Vertical version, angled terminals Contact terminals: A: 11x1.0mm B: 11x1.2mm Coil terminals: 0.6 x0.6mm * auxiliary solder point 0.6 x1.0 2 03-2013, Rev. 0313 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2013 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company