FCA-150-BX4 TE Connectivity

CII Mid-Range Relays FCA-150 Series, 50 Amps, 1PST/NO (DM) Relay Product Facts n Non-latching relay n Balanced force design n Corrosion protected metal enclosure n All welded hermetically sealed enclosure occupies 3 3 about 1 in (16.4 cm ) n 1 Form X (SPST-NO-DM) n 6, 12 and 28 Vdc coils n Weight: 90 grams n Designed and built in The FCA-150 series relay is with the coil flux in the 1 Form X (SPST-NO-DM) accordance to a polarized, single-side sta- operated state. This results configuration with main MIL-PRF-6106 ble design, where the flux in appreciably increased contacts rated 50 Amps. from a permanent magnet contact pressure in both provides the armature hold- states over that of a spring ing force in the deactivated return non-polar design. state, and its flux path is switched and combined Specifications Contact Data Contact Form 1 Form X (SPST-NO-DM) Contact Rating in Amps (Continuous Duty) Type of Life (Min.) Load Cycles 28 Vdc Resistive 50,000 50 Inductive (L/R=5ms) 20,000 20 Motor 20,000 20 None 100,000 Overload Current (Resistive) 200 A, 50 cycles Max. Contact Drop at 10A Initial 30mV After Life 175mV Operate Time at Nominal Voltage 15ms Release Time 15ms Bounce Time 1ms Coil Data Coil Code 1 2 3 4 Nominal Operating Voltage (Vdc) 6 12 28 28 Maximum Operating Voltage (Vdc) 7.3 14.5 29 29 Maximum Pick-Up Voltage at +125C 4.5 9 18 18 Maximum Pick-Up Voltage at +125C, continuous current test (Vdc) 5.7 11.25 22.5 22.5 Drop-Out Voltage at OTR 0.3 2.5 0.75 4.5 1.5 7.0 1.5 7.0 Maximum Coil Current at +25C (A) .50 .26 .15 .15 Back EMF Suppressed to (Vdc) (Max) N/A N/A N/A -42 Coil Resistance 10% 18 70 290 290 530 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.CII Mid-Range Relays CII Mid-Range Relays FCA-150 Series, 50 Amps, 1PST/NO (DM) Relay (Continued) Specifications Electrical Data Initial Insulation Resistance (note 1) 100 megohms, minimum, at 500Vdc, between each pin and case Insulation Resistance After Life or Environmental Test (note 1) 50 megohms, minimum, at 500Vdc, between each pin and case Dielectric Strength At Sea Level Contacts to Ground and Between Contacts 1,250Vrms, 60 Hz. Coil to Ground 1,000Vrms, 60 Hz. Dielectric Strength at 80,000 ft (25,000m), All Points (note 4) 500Vrms, 60 Hz Environmental Data Ambient Temperature Range, Operating -70C to +125C Altitude 300,000 feet Shock Resistance 50 Gs, 11 ms. Vibration Resistance, Sinusoidal 20 Gs, 75-3000Hz. Mechanical Data Approximate Weight 3.2 oz. (90g) Max. NOTES 1. All wired terminals must be connected together during this test. Dielectric withstanding voltage and insulation resistance are measured between all mutually insulated wired terminals and between all these terminals and case. Terminals CODE B CODE C CODE K Solder Pin Terminals Solder Hook Terminals Terminal Shield Tin/Lead Plated Tin/Lead Plated 5 .20 .10 GOLD PIN TERMINALS FOR MIL-C-39029/22B 192 SOCKET PINS +X1 -X2 .76 .178 .178 .31 .31 .55 .55 .38 .062.002 DIA PINS 2 PLCS) .062.002 DIA HOOKS .255 2 (PLCS) BLUE BEAD .510 BLUE BEAD -X2 +X1 M4 x .7 STUD (2X) DIN 6798A LOCK WASHER -X2 +X1 DIN 934 NUT HEX (4X) .164-32 UNC-2A STUD MS35338-42 LOCK WASHER .164-32 UNC-2A STUD AN961-8T FLAT WASHER MS35338-42 LOCK WASHER MS35649-286T NUT, HEX AN961-8T FLAT WASHER 2 EACH REQUIRED MS35649-286T NUT, HEX 2 EACH REQUIRED 531 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.