HC-3 TE Connectivity

KILOVAC High Voltage Relays HC Series 3.5 kV Relays HC-1 No Load Switching HC-3 Make & Break Load Switching Product Facts for HC-1 n Widely used for RF applications n Vacuum dielectric for low leakage current applications n Copper contacts for high current capability Product Facts for HC-3 n Not designed for power switching n Tungsten contacts for For factory-direct application assistance, long life when power dial 800-253-4560, ext. 2055, or n Meets requirements of switching 805-220-2055. MIL-R-83725 n Vacuum dielectric for power n QPL version available, switching low current loads M83725/5-001 HC-5 Make Only Load Switching Product Facts for HC-5 n Gas-filled for make only power switching n SF-6 gas-filled for capacitive discharge applications n Tungsten contacts for long life when power switching Open Contacts to Ground Product Specifications for HC-1 2.5 pF HC-1, HC-3 and HC-5 Contact Arrangement SPDT Contact Resistance, Max. Coil Data Contact Form C HC-1 0.01 ohm Test Voltage, DC or 60 Hz (Peak) Nominal Volts DC 12 Vdc 26.5 Vdc 115 Vdc HC-3 0.02 ohm 5 kV Pickup, Max. 8 Vdc 16 Vdc 80 Vdc HC-5 0.50 ohm* Rated Operating Voltage (Peak) Dropout .5-5 Vdc 1-10 Vdc 5-50 Vdc Operate Time, Max. 6 ms DC or 60 Hz 3.5 kV Coil Resistance (10%) 80 335 6000 Release Time, Max. 6 ms 2.5 MHz 2.5 kV Ratings listed are for 25C, sea level conditions Shock, 11ms, 1/2 Sine (Peak) 16 MHz 2 kV 50 g 32 MHz 1.5 kV Vibration Continuous Carry Current, Max. Peak 10 g (55 to 2000 Hz) Ordering Information DC or 60 Hz HC-1 25 A HC-3 18 A Operating Ambient Temperature HC-5 8 A Range -55C to +125C Sample Part Number HC- 1 /12Vdc 2.5 MHz HC-1 14 A Mechanical Life Series: HC-1, HC-3 2 million cycles 16 MHz HC-1 9 A HC-5 1 million cycles Model: Weight, Nominal 1 32 MHz HC-1 7 A 28.35 g (1.0 oz.) 3 Note: Coil Hi-Pot (Vrms, 60 Hz) 500 A 5 *Contact resistance for gas-filled Contact Capacitance Coil Voltage: relays is measured at 28 Vdc, 1 Between Open Contacts Amp Blank = 26.5 Vdc HC-1 2 pF /12Vdc = 12 Vdc /115Vdc = 115 Vdc 758 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.KILOVAC High Voltage Relays HC Series 8 kV Relays HC-2 No Load Switching HC-4 Make & Break Load Switching Product Facts for HC-2 n Vacuum dielectric and copper contacts for high current carry rating of 25 Amps n Not designed for power switching Product Facts for HC-4 n Stable, low contact n Tungsten contacts for long n Meets requirements of resistance life in power switching MIL-R-83725 n Meets requirements of applications MIL-R-83725 n Vacuum dielectric for arc suppression when making or breaking a load HC-6 Make Only Load Switching Product Facts for HC-6 n Tungsten contacts for switching high in-rush loads n SF-6 gas-filled for capacitive discharge applications n Suitable for ESD testing applications n Tungsten contacts for long life in power switching applications Product Specifications for Shock, 11ms, 1/2 Sine (Peak) 50 g HC-2, HC-4 and HC-6 Coil Data Vibration Contact Arrangement SPDT Peak 10 g (55 to 2000 Hz) Nominal Volts DC 12 Vdc 26.5 Vdc 115 Vdc Contact Form C Operating Ambient Temperature Pickup, Max. 8 Vdc 16 Vdc 80 Vdc Test Voltage, DC or 60 Hz (Peak) Range -55C to +125C Dropout .5-5 Vdc 1-10 Vdc 5-50 Vdc 10 kV Mechanical Life Coil Resistance (10%) 80 335 6000 Rated Operating Voltage (Peak) HC-2 and HC-4 2 million cycles DC or 60 Hz 8 kV Ratings listed are for 25C, sea level conditions HC-6 1 million cycle Continuous Carry Current, Max. Weight, Nominal DC or 60 Hz HC-2 25 A RMS 39.69 g (1.4 oz.) HC-4 15 A RMS HC-6 8 A RMS *Contact resistance for gas-filled Ordering Information Coil Hi-Pot (Vrms, 60 Hz) 500 A RMS relays is measured at 28 Vdc, 1 Amp Contact Capacitance Between Open Contacts N/A Sample Part Number HC- 6 /12Vdc Open Contacts to Ground N/A Series: Contact Resistance, Max. HC-2 0.01 ohm Model: HC-4 0.02 ohm 24 6 HC-6 0.5 ohm* Coil Voltage: Operate Time, Max. 6 ms For factory-direct application assistance, Blank = 26.5 Vdc Release Time, Max. 6 ms dial 800-253-4560, ext. 2055, or /12Vdc = 12 Vdc 805-220-2055. /115Vdc = 115 Vdc 764 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.