RF Signal Relays
AXICOM
Telecom-, Signal and RF Relays
Sep. 07, Rev. B
HF6 Relay
HF6 Relay
Terminal assignment
n
Y-Design
Relay top view
n
Frequency range DC to 6GHz
n
Impedance 50
n
Small dimensions (16x7.6x10mm)
Non-latching type, Latching type, 1 coil Latching type, 2 coils
n
1 form C contact (1 changeover contact)
not energized condition rest condition reset condition
n
Immersion cleanable
n
Low power consumption (140mW)
Telecom-, Signal and RF Relays Sep. 07, Rev. B
Typical applications
Measurement and test equipment ATE, wireless base stations and
HF6 Relay
antennas, wireless infrastructure, RF power amplifier
Terminal assignment
Relay top view
Contact Data Contact Data (continued)
Contact arrangement 1 form C, 1 CO 50 version, bistable, 2 coils
Max. switching voltage 220VDC, 250VAC 91 3 2.25 6.50 2.25 64 140
Non-latching type, Latching type, 1 coil Latching type, 2 coils
Rated current 2A 92 4.5 3.38 9.80 3.38 145 140
Limiting continuous current 2A 93 5 3.75 10.90 3.75 178 140
not energized condition rest condition reset condition
Switching power 60W, 62.5VA, 94 6 4.50 13.00 4.50 257 140
50W (2.5GHz) 95 9 6.75 19.60 6.75 574 140
Max. continuos RF-power at 20C. 50W (2.5GHz) 96 12 9.00 26.10 9.00 1028 140
Contact material Ag, Au covered 97 24 18.00 52.30 18.00 2880 200
All figures are given for coil without pre-energization, at ambient temperature +23C.
Minimum switching voltage 100V
Initial contact resistance <100m at 10mA/30mV
Coil Operating Range
Operate time typ. 3ms, max. 5ms
Release time
without diode in parallel140 mW typ. 2ms, max. 5ms 70 mW
with diode in parallel typ. 4ms, max. 6ms Coil operating Range
Bounce time max. typ. 1ms, max. 3ms
3.5
Duration of set/reset pulse min. 20ms140 mW
7 70 mW
Mechanical endurance 10 operations
3
Umax. at 0 A
Umax. at 0 A
2.5
Coil Data
Coil voltage range 3 to 24VDC
2
Coil versions, 50 version, monostable
1.5
Coil Rated Operate Limiting Release Coil Rated coil
U nom. nominal coil voltage
code voltage voltage voltage voltage resistance power
1U nom. nominal coil voltage
VDC VDC VDC VDC 10% mW
min. max. min.
Uop. min.
51 3 2.25 6.50 0.30 64 140
0.5
Uop. min.
52 4.5 3.38 9.80 0.45 145 140
Urel. min.
Coil Operating Range
53 5 3.75 10.90 0.50 178 140
0
-55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135
54 6 4.50 13.00 0.60 257 140
Ambient Temperature [C]
55 9 6.75 19.60 0.90 574 140
Ambient Temperature [C]
140 mW 70 mW
56 12 9.00 26.10 1.20 1028 140
57 24 18.00 52.30 2.40 4114 140
All figures are given for coil without pre-energization, at ambient temperature +23C.
3.5
U = Nominal coil voltage 140 mW
nom
70 mW
U = Upper limit of the operative range of
max.
Contact Data (continued)
3
Umax. at 0 A
the coil voltage (limiting voltage)
Coil versions, bistable
Umax. at 0 A
Coil Rated Set Limiting Reset Coil Rated coil
U = Lower limit of the operative range of 2.5
op. min.
code voltage voltage voltage voltage resistance power
the coil voltage (reliable operate voltage)
VDC VDC VDC VDC 10% mW 2
For latching relays U resp U min.
set min. . reset
50 version, Bistable, 1 coil
U = Lower limit of the operative range of
rel. min.
71 3 2.25 9.20 -2.25 128 70 1.5
U nom. nominal coil voltage
the coil voltage (reliable release voltage)
72 4.5 3.38 13.85 -3.38 289 70
1U nom. nominal coil voltage
73 5 3.75 15.30 -3.75 357 70
74 6 4.50 18.50 -4.50 514 70
Uop. min.
0.5
75 9 6.75 27.70 -6.75 1157 70
Uop. min.
Urel. min.
76 12 9.00 37.00 -9.00 2057 70
0
77 24 18.00 74.00 -18.00 8228 70
-55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135
Ambient Temperature [C]
Ambient Temperature [C]
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 12
1
03-2017, Rev. 0317 Datasheets and product specification Datasheets and product daU = Nominal coil voltageta is subject to the Datasheets, product data, Definitions sec -
nom
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
U = Upper limit of the operative range of
max.
2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
the coil voltage (limiting voltage)
a TE Connectivity Ltd. company RF Signal Relays
AXICOM
HF6 Relay (Continued)
Insulation Data Other Data
Initial dielectric strength Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
between open contacts 600Vrms refer to the Product Compliance Support Center at
between contact and coil 1000Vrms www.te.com/customersupport/rohssupportcenter
Initial surge withstand voltage Ambient temperature -55C to +85C
between open contacts 1000V Thermal resistance <165K/W
between contact and coil 1500V Category of environmental protection
IEC 61810 RT III - wash tight
Degree of protection, IEC 60529 IP 67, immersion cleanable
RF Data Vibration resistance (functional) 35g, 10 to 1000Hz
Isolation at 900MHz/3GHz/6GHz 80dB/60dB/30dB Shock resistance (functional), half sinus 11ms 50g
Insertion loss at 900MHz/3GHz/6GHz 0.05dB/0.15dB/0.80dB Shock resistance (destructive), half sinus 0.5ms 150g
Voltage standing wave ratio (VSWR) Terminal type SMT
at 900MHz/3GHz/6GHz 1.05/1.10/1.40 Weight max. 3g
Typical RF performance, 50 version Resistance to soldering heat Peak value
SMT IEC 60068-2-58 250C/10s
Moisture sensitive level, JEDEC J-Std-020D MSL3
Ultrasonic cleaning not recommended
Packaging/unit, SMT reel/400 pcs., box/400 pcs. or 2000 pcs.
PCB layout
TOP view on component side of PCB
Terminal assignment
TOP view on component side of PCB
Monostable Bistable, 1 coil Bistable, 2 coils
Contacts are shown in reset
condition.
Contact position might
change during transportation
and must be reset before use.
2
03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company