HM1-26B = HM RELAY TE Part 1-1617108-0 TE Internal : HM1-26B HM1-26B = HM RELAY ACTIVE CII CII HM Relay TE Part 1-1617108-0 TE Internal : HM1-26B View on TE.com> Relays, Contactors & Switches > Relays > Mil-Aero Relays > TO-5/.100 Grid Relays Contact Arrangement: 2 Form C, DPDT, 2 C/O Input Voltage: 26 VDC Coil Suppression Diode: Without MOSFET Driver: Without Transistor Driver: Without Features Product Type Features Enclosure Type Hermetically Sealed Relay Type Military/Aerospace High Performance Coil Latching Without Product Type Relay MOSFET Driver Without Configuration Features Transistor Driver Without Electrical Characteristics Coil Magnetic System Non-Polarized, Monostable Vibration 10G s, 10 500Hz Actuating System DC Shock 30G s, 6ms Coil Power Measurement Milliwatts Input Voltage 26 VDC Coil Suppression Diode Without Coil Voltage 26 VDC Coil Resistance 1560 Coil Power Rating (DC) 450 mW Coil Polarity Protection Diode Without Contact Switching Voltage (Max) 28 08/23/2019 04:36AM Page1 For support call+1 800 522 6752 HM1-26B = HM RELAY TE Part 1-1617108-0 TE Internal : HM1-26B Contact Switching Voltage (Max) 28 Contact Features Contact Current Class Low Level 1 A Pin Configuration .200 x .300 Spreader Pad Contact Arrangement 2 Form C, DPDT, 2 C/O Contact Current Rating 1 A Termination Features Termination Type PC Pins Mechanical Attachment Mounting Type Printed Circuit Board Usage Conditions Operating Temperature Range -55 85 C Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Not Compliant EU ELV Directive 2000/53/EC Not Compliant China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2019 (197) Candidate List Declared Against: JAN 2018 (181) Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free Solder Process Capability Not lead free process capable Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling 08/23/2019 04:36AM Page2 For support call+1 800 522 6752