HRHF-200FR-6/97 TE Connectivity

Heat-shrinkable Tubing RAYCHEM Tubing Products HRHF/HRNF/HRSR 1 High-Ratio, Heat-Shrinkable Tubing Product Facts Offers toughness and durability Provides excellent insulation and abrasion protection Is available in flame- retardant material Shrinks to fit (5.6:1) FR callouts meet all of the requirements of AMS-DTL-23053/15*, except for some of the tubing sizes, which do not meet the exact recovered wall thickness requirements HRHF and HRSR have the following agency approvals: - ABS (American Bureau of Shipping) - Lloyds (Lloyds Register of Shipping RoHS compliant Applications material and with or without Installation factory-applied sealants High-ratio (HR) heat- Minimum shrink and adhesives. The water- shrinkable tubing, with temperature: 80C 176F proofing sealant provides expansion ratios as high environmental sealing and Minimum full recovery as 5.6 to 1, is designed to is watertight in wet and temperature: 121C 250F accommodate large size corrosive locations. The differences between cables thermoplastic adhesive Operating Temperature Range and cable connectors and coating offers excellent backshells, thus simplifying strain relief and environ- -55C to 110C repair of damaged cable. mental sealing. -67F to 230F High-ratio tubing is available in semirigid flame-retardant (SR), standard (NF), or high-flex flame-retardant (HF) Specifications/Approvals Series Agency Raychem HRSR ABS, Lloyds RW-2013 HRHF ABS, Lloyds RW-2013 HRNF RW-2013 Available in: Americas Europe Asia Pacific 1-39 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666RAYCHEM Tubing Products HRHF/HRNF/HRSR (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness Size Minimum Expanded Maximum Recovered Nominal as Supplied After Heating After Heating HR**060 15.24 0.600 3.81 0.150 1.52 0.060 HR**125 31.75 1.250 6.10 0.240 1.52 0.060 HR**175 44.45 1.750 8.00 0.315 2.41 0.095 HR**200 50.80 2.000 9.52 0.375 2.67 0.105 HR**250 63.50 2.500 12.70 0.500 3.05 0.120 HR**300 76.20 3.000 19.05 0.750 3.05 0.120 HR**400 101.60 4.000 22.86 0.900 3.56 0.140 For ** substitute HF, NF or SR for material required. Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Nonstandard Clear available on request (not flame-retardant HRHF only) Size selection Always order the largest size that will shrink snugly over the component to be covered. Other sizes are available upon request. Standard packaging Up to 18 inch lengths maximum.* Ordering description See below. *Cutting tolerance is 0.125 . HRHF - - / Part Numbering System NM - no mark Coating Adhesive (/97) Sealant (/226) Blank for no coating Length in inches (up to 18 inch length maximum) FR - flame-retardant for SR and HF CL - Clear, non-flame-retardant HF only Size Product Name HRHF - high flex HRNF - non-flame-retardant HRSR - semirigid Example: HRHF-125FR-10/226-NM 1-40 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666