HRSR/HRHF/HRNF High Ratio Heat Shrinkable Tubing Table 1: Dimensions As Supplied Recovered SIZE Inside Diameter* Inside Diameter Wall Thickness Minimum (D) Maximum (d) Nominal (W) -060 0.600 (15) 0.150 (4) 0.060 (1.5) -125 1.250 (32) 0.240 (6) 0.060 (1.5) -175 1.750 (44) 0.320 (8) 0.095 (2.4) -200 2.000 (51) 0.380 (10) 0.105 (2.7) 2.500 (64) 0.500 (13) 0.120 (3.0) -250 -300 3.000 (76) 0.750 (19) 0.120 (3.0) -400 4.000 (102) 0.900 (23) 0.140 (3.6) * When specification calls for coated tubing, reduce allowed minimum inside diameter by 0.10 inch allow to for sealant thickness. Properties: HRSR tubing is semi rigid and is fabricated from thermally stabilized, flame retarded, cross linked modified polyolefin. The color shall be black, unless otherwise specified. HRSR tubing meets the material requirements in RW 2013. Tests are performed on uncoated tubing. HRHF tubing is highly flexible and is fabricated from thermally stabilized, flame retarded, cross linked modified polyolefin. The color shall be black, unless otherwise specified. HRHF tubing meets the material requirements in RW 2013. Tests are performed on uncoated tubing. HRNF tubing is semi-rigid and is fabricated from thermally stabilized, cross linked modified polyolefin. It is not flame retarded. The color shall be black, unless otherwise specified. HRNF tubing meets the material requirements published in RW 2013. Tests are performed on uncoated tubing. 2006, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. Specification Control Drawing TE Connectivity Title: 300 Constitution Drive High Ratio Heat-shrinkable Menlo Park, CA 94025 USA Tubing TE Connectivity reserves the right to amend this drawing at any Document No : time. Users should evaluate the suitability of the product for their HRSR/HRHF/HRNF application Cage Code: Scale: Size: Rev. Date: Rev.: Sheet: 06090 None A 15-Apr-11 D1 1 of 2 Print Date: 18-Apr-11 If this document is printed it becomes uncontrolled. Check for the latest revision. Specification Control Drawing ORDERING INFORMATION HR HF 125 FR - 10 / 97 / NM NM No mark (See Note) COATING Adhesive = 97 standard with FR Sealant = 226 standard with NF LENGTH in inches (10 standard) FR Flame retardant for SR & HF SIZE (See Table 1) MATERIAL HF - flex SR - semi rigid NF - non-flame FAMILY Note: Standard marking is white for black tubing. Standard marking is black for non flame retardant clear tubing. Expanded and recovered dimensions will be printed in inches and millimeters. HRHF-XXX FR, HRSR-XXX FR, or HRNF-XXX FR will be printed on material Rev. Date: Rev.: Document No. Sheet: 15-Apr-11 D1 2 of 2 HRSR/HRHF/HRNF 2006, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved Print Date: 18-Apr-11 If this document is printed it becomes uncontrolled. Check for the latest revision.