5375 (08/13) 108-121024 RW-2524 CLASS 1 - Public SPECIFICATION RW-2524 TE 108-121024 HTCM-SCE-TP High Temperature Cable Marker SCOPE This Quality Assurance Specification establishes the quality standard for HTCM-SCE-TP cable markers. Designed to identify cables, wire bundles, pipes and conduits, in applications up to 225C. This system is an automatic method of identifying wire and cable by printing a mark on the cable marker. The operating temperature for this product is -55C to +225C (-67F to +437F). This system is designed to be applied once cabling has been installed. Each Cable Marker is bound to the assembly by two Cable ties. Cable Markers are made from radiation-cross linked modified polyvinylidene fluoride, offering enhanced temperature and chemical resistance. These Cable Markers are suitable for space applications where low out gassing is critical. The marker system comprises specific printers and ribbons (refer to Identification Printer Product Ribbon Matrix Document 411-121005). Compliance to this specification can only be guaranteed if TE Connectivity approved printers and ribbons are used. This specification covers the Cable Marker only. For maximum thermal performance, suitable Cable ties must be used. THIS IS A CLASS 1 DOCUMENT WHICH IS NONCONFIDENTIAL. The information contained within this document is the property of TE Connectivity. It is supplied in confidence and the commercial security of the contents must be maintained. It must not be used for any purpose other than that for which it is supplied nor may any information contained in it be disclosed to unauthorised persons. It must not be reproduced in whole or in part without obtaining written permission from TE Connectivity (TE). While TE has made every reasonable effort to ensure the accuracy of the information in this standard, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this standard are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. 2019 TE Connectivity Ltd. family of companies. TE Proprietary & Confidential Information 1 of 16 All Rights Reserved. Class I Data Classification - See Policy TEC-02-04 Indicates Change IDENTIFICATION SOLUTIONS /// RW-2524 26 November 2019 Rev 8 5375 (08/13) 108-121024 RW-2524 CLASS 1 - Public 1. REVISION HISTORY Revision Description of change Date Incorporated By Number 0 Formerly RW 3024 Revision 3 24.07.2001 Raychem USA 1 AFC 289 03.09.2004 Paul Crofts 2 AFC 509 21.11.2007 Alan Kean 3 See PCN 07.03.2014 Lee Smith 4 Improve drawing quality 06 Feb 2015 Alan Kean Correction to typos on drawing, 5 April 2018 Alan Kean update to new template. Correction to figure 4 pitch, and 6 correction to upper operating October 2019 Lee Smith temperature limit. 7 & 8 No change to doc, system only November 2019 Lee Smith 2. REQUIREMENTS 2.1 Composition, appearance and color The Cable Marker shall be fabricated from irradiated, thermally stabilized modified polyvinylidene fluoride compound. Formed into punched organized cable markers. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles, seams, cracks or inclusions. The markers shall be White unless otherwise specified. The markers shall be supplied as a continuous length of perforated material on a carrier strip as described in Table 1. 2.2 Dimensions, available sizes and formats Refer to figures 1 to 6. Table 1: Product dimensions Printable Marker Number Marker thickness Part Description height length of mm (in) mm (in) mm (in) holes 0.51 0.10 HTCM-SCE-TP-1/4-4H 6.40 (0.250) 50.80 (2.000) 4 (0.02 0.004) 0.51 0.10 HTCM-SCE-TP-1/4-6H 6.40 (0.250) 50.80 (2.000) 6 (0.02 0.004) 0.51 0.10 HTCM-SCE-TP-1/2-4H 12.70 (0.500) 50.80 (2.000) 4 (0.02 0.004) 0.51 0.10 HTCM-SCE-TP-1/2-6H 12.70 (0.500) 50.80 (2.000) 6 (0.02 0.004) 2.3 Test Requirements The test requirements shall be as specified in Table 2. 2019 TE Connectivity Ltd. family of companies. TE Proprietary & Confidential Information 2 of 16 All Rights Reserved. Class I Data Classification - See Policy TEC-02-04 Indicates Change IDENTIFICATION SOLUTIONS /// RW-2524 26 November 2019 Rev 8