5375 (08/13) 108-121015 RW-2512 CLASS 1- Public SPECIFICATION RW-2512 TE 108-121015 HT-SCE and HT-CT HEAT SHRINK MARKER SLEEVES SCOPE This quality assurance specification establishes the quality standard for a heat-shrinkable identification sleeving for use in applications where high performance during exposure to organic fluids, especially oils and diesel fuel is required. These special requirements are detailed in Table 5. The operating temperature for this product is -55C to +225C (-67 to +437F). This system is an automatic method of identifying items by printing a mark on HT-SCE product range. The mark is permanent upon printing. This system is not recommended where strain relief properties are required. The marker shall be fabricated from cross linked polymer tubing, flattened and then mounted on a carrier as HT-SCE or supplied as flattened spooled continuous tube as HT-CT. All sizes 2:1 shrink ratio except size 3/32 which is 3:1 shrink ratio (refer to Table 1 for more details). The marker system comprises specific printers and ribbons refer to TE document 411-121005 TE Identification Printer Product Ribbon Matrix. Products printed with the white or silver ribbons may not fully comply with this specification when exposed to some aggressive fluids, details on page 15. Compliance to this specification can only be guaranteed if TE Connectivity approved printers and ribbons are used. Unless specified, the tube size for qualification testing is 6.4mm. THIS IS A CLASS 1 DOCUMENT WHICH IS NONCONFIDENTIAL. The information contained within this document is the property of TE Connectivity. It is supplied in confidence and the commercial security of the contents must be maintained. It must not be used for any purpose other than that for which it is supplied nor may any information contained in it be disclosed to unauthorised persons. It must not be reproduced in whole or in part without obtaining written permission from TE Connectivity (TE). While TE has made every reasonable effort to ensure the accuracy of the information in this standard, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a purpose. The dimensions in this standard are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. 2016 TE Connectivity Ltd. family of companies. TE Proprietary & Confidential Information 1 of 19 All Rights Reserved. Class I Data Classification - See Policy TEC-02-04 Indicates Change IDENTIFICATION SOLUTIONS /// RW-2512 31 July 2017 Rev 5 5375 (08/13) 108-121015 RW-2512 CLASS 1- Public Table of Contents 1 Revision History ......................................................................................................................... 3 2 Scope ........................................................................................................................................ 3 3 Requirements ............................................................................................................................. 3 4 Dimensions ................................................................................................................................ 3 5 Figure 1: HT-SCE Sleeve format ................................................................................................ 4 6 Dimensions ................................................................................................................................ 5 7 Table 4: General Requirements for Identification Products ........................................................ 15 8 Specific Requirements for HT-SCE Heat Shrink Sleeving ......................................................... 18 9 Test Fluids Description ............................................................................................................. 19 2016 TE Connectivity Ltd. family of companies. TE Proprietary & Confidential Information 2 of 19 All Rights Reserved. Class I Data Classification - See Policy TEC-02-04 Indicates Change IDENTIFICATION SOLUTIONS /// RW-2512 31 July 2017 Rev 5