General Purpose Contactors TE Connectivity High Voltage Contactors IHVA150 Series n Non-polarity for contact current n Maximum DC breaking capacity at 1500A n Maximum DC breaking capacity at 1500VDC n Maximum making inrush current capacity at 600A n Optional auxiliary contact available n High insulation resistance (14mm clearance/25mm creepage) Typical applications Charging station, AGV, Electric forklift, Energy storage systems, Photovoltaic inverter Approvals cULus E58304, CCC Main Contact Data Insulation Data Contact arrangement 1 Form X (SPST-NO-DM) Dielectric Withstand Voltage (leakage current <1mA) 1) Switching voltage range 12 - 1500VDC between open contacts 5,600Vrms/8,000Vdc Rated current 150 A between contact and coil 6000Vrms Contact material Ag alloy Initial insulation resistance 500VDC 8 Initial Voltage Drop 0.3m (150A current 1 minute after) between open contacts 110 8 Operate Time max. 65ms between contact and coil 110 Operate bounce time max. 2ms Clearance/creepage Release Time, max 20mS between contact and coil 14mm clearance/25mm creepage Mechanical Life 500,000 cycles 1) Please refer to contact ratings with the specified application condition. If there is no specified statement, the switching test was performed at room temp. Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Contact ratings refer to the Product Compliance Support Center at Load Cycles www.te.com/customersupport/rohssupportcenter 5A, 1500VDC, UL60947-4-1 200 Ambient temperature 20A, 1000VDC, UL60947-4-1 50 DC coil -40C to +85C 150A, 1500VDC, carry only, UL60947-4-1 / Category of environmental protection 150A, 110VDC, EN/UL60947-4-1 6,000 IEC 61810 RTII - flux proof 150A, 450VDC, 100 Vibration resistance (functional) Sine, 55 2000Hz, Peak 20G 150A, 750VDC, 30 Shock resistance (functional), 11ms 1/2 Sine, Peak 20G 600A, make only, 3,000 Terminal type Screw for contact, wire for coil 1500A, 400VDC, break only 2 Weight 465g Packaging/unit 20pcs/box Auxiliary Contact Data 2) Contact Form 1 Form A (SPST-NO) IHVA150 Estimated Carrying Current Capability Contact Current, Max. 2A, 30VDC / 3A, 125VAC Contact Current, Min. 100mA, 8VDC Contact Resistance, Max. 0.3 30VDC / 0.15 125VAC Coil versions, DC coil Coil Nominal Operate Maximum Release Coil Coil Power code Voltage Voltage allowable Voltage resistance W VDC VDC voltage VDC VDC 12 12 9 15 1 29 5 24 24 18 30 2 115 5 48 48 36 60 4 460 5 All figures are given for coil without pre-energization, at ambient temperature +23C 2) All figures are given at ambient temperature 85 C and the contactors connected with 2/0 cable 1 01-2021 Rev. 0121 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Contactors TE Connectivity High Voltage Contactors IHVA150 Series (Continued) Dimensions Connection wire Note: TE will provide 2 pairs of M8 nuts and gaskets. TE will provide the connection wire for coil terminals and auxiliary contact terminals (for the version with auxiliary contact). 2 01-2021, Rev. 0121 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company