IS-120 Tilt Sensor IS Series Mercury free Compact design Reed Switch reliability The IS-120 dimensions dimensionsdimensions From our range of tilt switches offering design engineers reed switch reliability for low load switching. FEATURES Operates in Vertical Axis Operate (contacts close) before -10 Release (contacts open) before +10 Lead end of sensor downward causes switch closure APPLICATIONS Truck bonnet position Robotic arm position Container lid position Rev A www.meas-spec.com 16 November 2012 Grangestone Ind. Est, Girvan KA26 9PS UK Tel: +44 1465 716999 csgrvn meas-spec.comIS-120 Tilt Sensor performance specificationsperformance specifications Material, Design and Operation Mounting Vertical Housing Material Nylon 6.6 Housing Colour Black Fitting Surface Switch Action SPST Contact Form A Contact Material Ruthenium Maximum Switching Volts (VAC) N/A Maximum Switching Volts (VDC) 48 Maximum Switching Current (Amp) 0.5 Maximum Power (Watt) 10 Connection Type Stripped Cables Cable Type 18GXL SAE J-1128 Cable Length 2 x 0.5M single insulated Cable Colour Black/Black Operate Temperature Range -40C to +125C Shock / Vibration Vertical Mount, 30g for 11ms half sine Operate Mode Operate <-10, Release <+10 IP Rating IP65 The information in this sheet has been carefully reviewed and is believed to be accurate however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customers technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering infoordering info The IS-120 is from our IS Series of Tilt Sensors. The Series is available in alternative with a number of standard options including: Operate Angle Cable Termination Please see the IS Series part number tree. Rev A www.meas-spec.com 16 November 2012 Grangestone Ind. Est, Girvan KA26 9PS UK Tel: +44 1465 716999 csgrvn meas-spec.com