KRP-11DN-110 TE Connectivity

General Purpose Panel/Plug-in Relays PPottotter & Brumfielder & Brumfield KRPA Series Panel Plug-in Relay n 5 to 10A current capability n Contact arrangements of 1, 2 and 3 form C (CO) n Octal type termination for quick installation n Indicator lamp available on certain models Typical applications Baggage handling, lighting, inspection equipment, marine. Coil Data (continued) Approvals Coil versions, AC coil UL E22575 CSA LR15734 Technical data of approved types on request. Coil Rated Operate Coil Rated coil code voltage voltage resistance power Contact Data VAC VAC 15% VA Contact arrangement 1 form C (CO), 2 form C (CO), 3 form C (CO) 6 6 5.1 6 2.01 Rated voltage 240VAC 12 12 10.2 24 2.02 Rated current 10A 24 24 20.4 85 2.02 Contact material Ag AgCdO 120 120 102.0 2250 2.1 Min. recommended contact load 100mA, 12VDC 300mA, 12VDC 240 240 204.0 9110 2.1 Frequency of operation 360 ops./hour 360 ops./hour All figures are given for coil without preenergization, at ambient temperature +23C. Insulation Data Contact ratings Initial dielectric strength Type Load Cycles between open contacts 1000V UL 508 rms between contact and coil 1000V KRPA, Ag rms 3 between adjacent contacts 1000V 5A, 120VAC 100x10 rms 3 Initial insulation resistance 3A, 240VAC 100x10 3 between insulated elements KRPA: 1000M 1/10HP, 120VAC 1x10 3 KA: 100M 1/6HP, 240VAC 1x10 KRPA, AgCdO 3 10A, 240VAC 100x10 Other Data 3 1/3HP, 120VAC 1x10 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 3 1/2HP, 240VAC 1x10 refer to the Product Compliance Support Center at KA, Ag www.te.com/customersupport/rohssupportcenter 5A, 120VAC Ambient temperature 3A, 240VAC DC coil KRPA: -45C to 70C 1/10HP, 120VAC KA: -45C to 85C 1/6HP, 240VAC AC coil KRPA: -45C to 55C KA, AgCdO KA: -45C to 70C 10A, 120VAC Category of environmental protection 6A, 240VAC IEC 61810 RTI - dust protected KRPA and 1/6HP, 120VAC RT0 - open style KA 1/3HP, 240VAC Terminal type KRP A: 8- or 11-pin octal-type plug 6 Mechanical endurance 10x10 ops. KA: solder terminals Weight 85g Packaging/unit tray/25 pcs., box/150pcs. Coil Data Coil voltage range 6 to 220VDC Accessories 6 to 240VAC For details see datasheet Sockets and Accessories, KRPA Relays Coil insulation system according UL Class B Coil versions, DC coil Product Code Description Coil Rated Operate Coil Rated coil 27E891 Two pole DIN socket (use 20C318 clip) code voltage voltage resistance power 27E892 Three pole DIN socket (use 20C318 clip) VDC VDC 10% W 27E122 Two pole track mount socket (use 20C318 clip) 6 6 4.5 32 1.15 27E123 Three pole track mount socket (use 20C318 clip) 12 12 9.0 120 1.2 24 24 18.0 472 1.25 48 48 36.0 1800 1.3 110 110 82.5 10000 1.2 220 Use 110V r elay with 10K, 5W resistor in series All figures are given for coil without preenergization, at ambient temperature +23C. 1 07-2015, Rev. 0715 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Panel/Plug-in Relays PPottotter & Brumfielder & Brumfield KRPA Series Panel Plug-in Relay (Continued) Dimensions KRPA KA 1.468 MAX. 2.0 MAX. 1.406 MAX. (37.29) (35.71) (50.8) 1.406 MAX. (35.71) 1.06 MAX44 (26.9) 1 STUD (11.2) .25 6-32 .15 (6.4) 1.92 MAX312 THREAD (3.8) (48.8) (7.92) Terminal assignment KRPA KRPA KRPA KA KA KA 1 form C 2 form C 3 form C 1 form C 2 form C 3 form C 8 8 1 11 1 1 10 2 7 2 7 2 9 3 6 6 3 3 8 4 5 7 5 4 5 4 6 Product code structure Typical product code KRPA -5 A Y -120 Type KRPA Enclosed relay with octal-style plug KA Open style relay with solder terminals Contact arrangement and rating 5 1 form C (CO) 11 2 form C (CO) 14 3 form C (CO) Coil Input A AC, 50/60Hz D DC Contact material and indicator lamp option Y Ag, no indicator lamp G AgCdO, no indicator lamp N AgCdO, with indicator (Code N only available with relay type KRPA) Options Leave blank no additional options F Au flashed contacts P Push to test button (Options F and P only available with relay type KRPA) Coil voltage Coil code: please refer to coil versions table 2 07-2015, Rev. 0715 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.