General Purpose Relays Industrial Relays Potter & Brumfield KUIP/KUGP Series Panel Plug-in Relay n 10 amp rated relays n 2 Form A (NO) and 1-3 Form C (CO) contact arrangement n KUIP 8mm coil-to-contact spacing and KUGP 3mm contact gap n Various mounting and socket styles Typical applications Voltage control units Approvals Coil versions, DC coil UL E22575 CSA LR15734 Coil Rated Operate Coil Rated coil Technical data of approved types on request code voltage voltage resistance power VDC VDC 10% W Contact Data KUIP Contact arrangement 5 5 3.75 21 1.2 KUGP: 2 form A (NO) 3 form A (NO) 6 6 4.5 32.1 1.125 KUIP: 1 form C (CO), 2 form A (NO), 2 form C (CO), 3 form C (CO) 12 12 9.0 120 1.2 Rated voltage 240VAC 24 24 18.0 472 1.25 Rated current 10A 48 48 36.0 1800 1.3 Contact material Ag AgCdO 110 110 82.5 10000 1.25 Min recommended contact load 100mA, 12VDC 300mA, 12VDC KUGP Frequency of operation 360 ops./hour 360 ops./hour 5 5 3.75 14 1.8 Operate/releases time max. 20/15ms 6 6 4.5 20 1.8 Bounce time max. 20ms 12 12 9.0 80 1.8 24 24 18.0 320 1.8 Contact ratings 48 48 36.0 1250 1.85 Type Load Cycles 110 110 82.5 6720 1.8 UL 508 All figures are given for coil without preenergization, at ambient temperature +23C. Ag 5A, 240VAC Coil versions, AC coil 5A, 28VDC Coil Rated Operate Coil Rated coil 1/6HP, 120VAC code voltage voltage resistance power 2.5A, 120VAC, tungsten VAC VAC 15% VA 1/3HP, 240VAC KUIP 1 and 2 pole 0.5A, 120VDC 6 6 5.1 6 2.0 5FLA, 15LRA, 250VAC 12 12 10.2 24 2.0 AgCdO 24 24 20.4 85 2.0 10A, 240VAC 120 120 102.0 2250 2.1 10A, 32VDC 240 240 204.0 9110 2.1 5FLA, 15LRA, 250VAC KUIP 3 pole, KUGP 1/3HP, 120VAC 6 6 5.1 4.2 2.8 5A, 120VAC, tungsten 12 12 10.2 18 2.8 1/2HP, 250VAC 24 24 20.4 72 2.8 0.5A, 125VDC 120 120 102.0 1700 2.9 10FLA, 40LRA, 125VAC 240 240 204.0 7200 2.9 3A, 600VAC All figures are given for coil without preenergization, at ambient temperature +23C. 1/2HP, 480VAC 1/2HP, 600VAC 1HP, 480VAC, 3 phase Insulation Data KUIP KUGP 6 Mechanical endurance 10x10 ops. Initial dielectric strength between open contacts 1200V 3500V rms rms between contact and coil 2200V 3750V rms rms Coil Data between adjacent contacts 2200V 3750V rms rms Coil voltage range 6 to 110VDC Initial insulation resistance 6 to 240VAC between insulated elements 100M, 500VDC Coil insulation system according UL Class B 1 08-2011, Rev. 0811 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Industrial Relays Potter & Brumfield KUIP/KUGP Series Panel Plug-in Relay (Continued) Other Data Accessories Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content For details see datasheet Sockets and Accessories, KUP Relays refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Product Code Description Ambient temperature 27E893 DIN socket (use 20C318 clip) DC coil KUIP: -45C to 95C 27E121 Track mount socket (use 20C314 clips) KUGP: -45C to 75C (1 & 2 pole) 27E043 Chassis mount/solder eyelet socket (use 20C254 clip) AC coil KUIP: -45C to 70C 27E046 Chassis mount/PCB socket (use 20C254 clip) KUGP: -45C to 70C (1 & 2 pole) 27E067 Chassis mount/quick connect socket (use 20C254 clip) Category of environmental protection 27E396 Snap-in/quick connect socket (use 20C254 clip) IEC 61810 RTI - dust protected Terminal type Quick connects (QC) .187 PCB-THT Terminal retention, push force 25 lbs for 3s Weight 85g Packaging/unit tray/25 pcs., box/150pcs. Dimensions Plain case Bracket mount case .312 .078 R. TYP. 2.90 MAX625 TYP. TYP. (73.7) (1.98) (15.88) (7.92) X 1.906 MAX75 (48.41) (19.1) 1.531 MAX. (38.89) X X X X .375 .437 (9.53) 2.500 X (11.10) X (63.50) 1.531 MAX. (38.89) 1.406 MAX. 1 2 3 (35.71) 4 5 6 .06 (1.52) 1.406 MAX. 7 8 9 (35.71) 1.906 MAX. A B .07 (48.41) (1.8) Top flange case PCB layout Bottom view on solder pins 1.518 MAX078 TYP. (38.56) 3 Form C shown (1.98) Omit unncessary holes for other contact forms 1 2 3 1.713 .003 4 5 6 (43.51 .08) .206 .076 DIA. TYP. 7 8 9 1.989 .003 (5.23) 1.373 .010 (1.93) (50.52) (34.87 .25) A B .328 (8.33) .626 (15.90) 2.248 MAX178 TYP. (57.10) (4.52) .437 (11.10) .875 (22.23) X Is For Terminal Dimensions. See Teminal Drawings. 2 08-2011, Rev. 0811 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company