Application Specification 114-151016 DEUTSCH* HD10 Series Connector System 22 Sep 2020 Rev A NOTE All numerical values are in metric units with U.S. customary units in brackets . Dimensions are in millimeters and inches . Unless otherwise specified, dimensions have a tolerance of .005 0.13 and angles have a tolerance of 2. Figures and illustrations are for identification only and are not drawn to scale. 1. INTRODUCTION This specification covers the requirements for application of TE Connectivity (TE) HD10 series connector system. HD10 features quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system. The HD10 Series is a heavy duty rated, environmentally sealed, thermoplastic, multi-pin connector. The thermoplastic shell is ideal in applications where chemicals can damage a connector housing. With arrangements from 3 to 9 cavities, HD10 connectors accept size 4, 12 and 16 contacts and are available either in-line, flanged or D-hole mounting. HD10 features quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system. Basic terms and features of this product are provide below. Retaining Ring Retaining Ring Grommet Grommet Contact Retainer Contact Retainer Plug Shell Receptacle Shell Coupling Ring Interface Seal Polarizing Indicator Polarizing Indicator 3X Bayonet Plug Receptacle 2020 TE Connectivity family of companies PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. 1 of 27 All Rights Reserved For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 114-151016 1.1 Plug Versions (1) With Coupling Ring Without Coupling Ring (HD16-9-16S) (HD16-6-12S) SAE J1939, Type 1 SAE J1939, Type 2 (HD16-9-1939S) (HD16-9-1939S-P080) (1) (1) SAE J1939, Type 1 SAE J1939, Type 2 (HD17-9-1939S) (HD17-9-1939S-P080) Note 1. Plugs without coupling ring and high durability terminals could be used in a diagnostic tool type application. 1.2 Receptacle Versions In-line Flange (HD14-9-16P) (HD10-9-16P) Header (HD10-9-96P-N005) 2 of 27 Rev A