M7139-500PG-P00000 TE Connectivity

M7100 Pressure Transducer SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces Medium to high pressures UL Certified Gage The M7100 pressure transducer from the Microfused line of MEAS sets a new price performance standard for demanding engine and vehicle, and industrial applications. This transducer is suitable for FEATURES measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and corrosive fluids. Hermetic Pressure Ports Integral Electrical Connector Survives High Vibration The transducer pressure cavity is machined from a solid piece of 0.25% Accuracy 17-4 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. This Water Resistant 1M Immersion automotive grade pressure transducer with stainless steel hermetic APPLICATIONS pressure ports and integral electrical connector can boast up to 10,000psi (700bar). The M7100 is UL certified and exceeds the On and Off Highway Engines and Vehicles latest industrial requirements including surge protection and is HVAC Refrigeration Controls overvoltage protected in both positive and reverse polarity. Compressors Hydraulics Energy and Water Management 04/2020 SENSOR SOLUTIONS ///M7100 Page 1 M7 10 0 Pressure Transducer STANDARD RANGES Range (psi) Range (bar) Gage 0 to 150 0 to 010 0 to 200 0 to 014 0 to 300 0 to 020 0 to 500 0 to 035 0 to 01K 0 to 070 0 to 1K5 0 to 100 0 to 03K 0 to 200 0 to 05K 0 to 350 0 to 7K5 0 to 500 0 to 10K 0 to 700 PERFORMANCE SPECIFICATIONS Ambient Temperature: 25C (unless otherwise specified) MIN TYP MAX NOTES PARAMETERS UNITS Steel Copper Steel Copper Load Resistance 10 K Accuracy (combined linearity, hysteresis & repeatability) -0.25 0.25 %Span 1 Total Error Band -1.0 -2.5 1.0 2.5 %Span 2 Compensated Temperature -20 -30 +85 120 C Operating Temperature -40 +125 C 3 Storage Temperature -50 +125 C Insulation Resistance (500V ) 100 M 4 DC Short Circuit Protected Yes Output Noise 1kHZ 10 mV Long Term Stability -0.25 0.25 %Span/Year Frequency Response -3dB 1 kHz Notes 1. Best fit straight line. 2. TEB includes all accuracy errors, thermal errors, span and zero tolerances over the compensated temperature range. 3. Temperature range for product with standard cable is -20C to +105C. 4. Between sensor body to any pins of connector. 5. The maximum pressure that can be applied without changing the transducers performance or accuracy. 6. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer 7. Refer to pressure port Listing notes for installation recommendations. 8. This product can be configured for custom OEM requirements. Contact Factory for different transfer function. See Pressure Transfer Function diagram. o o 9. Maximum temperature range for product with standard cable is -20 C to 105 C. 10. Do not apply torque to connector housing of transducer 11. To ensure proper environmental sealing and electrical connections when using a mating connector, follow the connector manufacturers installation guidelines. 04/2020 SENSOR SOLUTIONS ///M7100 Page 2