KILOVAC High Voltage DC Contactors KILOVAC MAP200 Series Contactor with 1 Form A (SPST-NO) Contacts Rated up to 500 Amps, 12-900 Vdc Product Facts n Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating for military aerospace, ground vehicle and naval, high current applications n Built-in coil economizer (models requiring external economizer also available) n Optional auxiliary contact for easy monitoring of power contact position n Hermetically sealed intrinsically safe, operates Performance Data in explosive/harsh Contact Arrangement, Power environments with no Coil Operating Voltage (Valid Over Temperature Range) Contacts 1 Form A (SPST-NO) oxidation or contamination Voltage (Will Operate) 18-32VDC Rated Operating Voltage of coil or contacts, including Voltage (Max.) 32VDC 12 - 900 VDC long periods of non- Pickup (Close) Voltage Max. 18VDC Continuous (Carry) Current, operation Hold Voltage (Min.) 10VDC Typical 500 A 85C, 400 mcm Dropout (Open) Voltage (Min.) 2VDC n Versatile coil and power conductors Inrush Current (Max.) 4.5A connections Consult Factory for required conductors Holding Current (Avg.) 0.5A for higher currents n RoHS versions available Inrush Time (Max.) 100ms Make/Break Current at Various 1 Voltages See graph next page 1 Break Current at 320VDC 2,000 A, 1 cycle Contact Resistance, Typ. Ordering Information ( 200A) 0.2 mohms Load Life See graph next page Typical Part Number MAP200 ARD E A Mechanical Life 1 million cycles Series: Contact Arrangement, Auxiliary MAP200 = 500 Amp, 12-900VDC Contactor Contacts 1 Form A (SPST-NO) Aux. Contact Current, Max. Contact Form: 2A 30VDC / 3A 125VAC A = Normally Open Aux. Contact Current, Min. H = Normally Open with Aux. Contacts 100mA 8V Coil Voltage: Aux. Contact Resistance, Max. R = 28 Vdc, Mechanical Economizer 0.417 ohms 30VDC / S = 28 Vdc, Electrical Cut-throat Economizer .150 ohms 125VAC Dielectric Withstanding Voltage Coil Wire Length: 2,200 Vrms sea level A = 15.3 in (390 mm) Insulation Resistance 500VDC D = Coil connector on relay (requires option E or 2 100 megohms X in next step). Shock, 11ms 1/2 Sine, Peak, Coil Terminal Connector: Operating 20 G N = No connector Vibration, Sine, 50-2000Hz., E = 9-pin subminiature D plug mounted on contactor Peak 20 G housing Operating Temperature X = Special configuration (consult factory) -55C to +85C Mounting & Power Terminals: Weight, Nominal .95 lb. (.43 kg) A = Bottom Mount & Male M8 x 1.25 Thread Terminals Notes: B = Bottom Mount & Female 1/4-20 Thread Terminals 1 Main power contacts 2 D = Bottom Mount & Female M6 x 1 Thread Terminals 50 at end of life For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. 710 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.KILOVAC High Voltage DC Contactors 28 VDC 120 VDC 600 VDC 900 VDC 1800 VDC 400 VDC 270 VDC KILOVAC High Voltage DC Contactors KILOVAC MAP200 Series (Continued) Outline Dimensions 2.688 .01 MAP200HR D-Sub (68.28 .26) Pin Out 1.05 .01 LABEL (26.67 .26) Coil+ = Pin 2 2 X M6 x 1 THREAD .45 (11.43) MIN DEPTH (11 THREADS) Coil - = Pin 6 TORQUE VS THREAD ENGAGEMENT Aux. COM = Pin 8 8 TO 11 THREADS: 80 TO 100 IN-LB (9.1 TO 11.3 NM) .800 .01 7 TO 8 THREADS: 70 TO 80 IN-LB (7.9 TO 9.1 NM) (20.3 .26) Aux. NO = Pin 4 5 TO 7 THREADS: 60 TO 70 IN-LB (6.8 TO 7.9) MAP200AR 3.289 .025 2 X 10-32 THREAD THRU (83.54 .635) Coil+ = Pin 2 TORQUE: 15 TO 30 IN-LB (1.7 TO 3.3 NM) Coil - = Pin 6 1.65 .01 (42.0 .26) WIRE VIEW REMOVED FOR CLARITY 2.245 .025 2.523 .025 (57.02 .635) (64.08 .635) 1.431 .025 2.20 .025 (36.35 .635) (55.81 .63) .546 .01 (13.87 .26) 3.17 .01 (80.48 .26) Estimated Make & Break Power Switching Ratings Make and Break Power Switching Region 650A Break Only Above 650A 100,000 10,000 1,000 100 10 7 1 1 10 100 1,000 10,000 Load Current (A) NOTES: 1) For resistive loads with 300H maximum inductance. Consult factory for inductive loads. 2) Estimates based on extrapolated data. User is encouraged to confirm performance in application. 3) End of life when dielectric strength between terminals falls below 50 megohms 500VDC. 4) The maximum make current is 650A to avoid contact welding. For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. 711 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. Estimated Life (Cycles)