MSP-183 TE Connectivity

CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) MS, MSD, MSDD MS MSD MSDD Sensitive TO-5 Sensitive TO-5 Sensitive TO-5 Diode High Performance Relay Diode Suppressed Suppressed/Protected High Performance Relay High Performance Relay Qualified to MIL-R-39016/11 Qualified to Qualified to MIL-R-39016/16 MIL-R-39016/21 + + X1 X2 X2 X1 X2 X1 A2 B2 A2 B2 A2 B2 A1 B1 A1 B1 A1 B1 A3 B3 A3 B3 A3 B3 Terminal View Terminal View Terminal View Product Facts Product Facts Product Facts n Hermetically sealed n Suppression diode n Suppression & protection diodes n High shock & vibration n Hermetically sealed ratings n Hermetically sealed n High shock & vibration n Spreader pads ratings n High shock & vibration ratings n Excellent RF switching n Spreader pads n Spreader pads n Excellent RF switching n Excellent RF switching Electrical Characteristics Contact Ratings Contact Arrangement Contact Operations Type Load Min. 2 Form C (DPDT) 1.0 A 28 Vdc Resistive 100,000 Contact Material 250 mA 115 Vac, 60 Hz & 400 Hz Resistive (case not grounded) 100,000 Stationary Gold/platinum/palladium/silver alloy 100 mA 115 Vac, 60 Hz & 400 Hz Resistive 100,000 (gold plated) 0.2 A 28 Vdc Inductive (0.32 Henry) 100,000 Moveable 0.1 A 28 Vdc Lamp 100,000 Gold/platinum/palladium/silver alloy 30 A 50 mVdc Low Level 1,000,000 (gold plated) 0.1 A 28 Vdc Intermediate Current 50,000 Contact Resistance Before Life 100 milliohms max. (measured 10 mA 6 Vdc) After Life 200 milliohms max. (measured 1 A 28 Vdc) .335 (8.51) DIA MAX Mechanical Life Expectancy 1 million operations .370 (9.40) DIA MAX Coil Voltage 5 to 48 Vdc .031 .003 (0.79) .375 (9.53) Coil Power 565 mW max. 25C .035 (0.89) MAX Duty Cycle Continuous Pick-up Voltage Approximately 50% of nominal coil voltage TERMINALS Pick-up Sensitivity W 1.500 MIN (38.1) C .500 MIN (12.7) 60 mW max. 25C P .187.010 (4.75.25) .200 (5.08) (Length excludes mounting pad) 36 3 DIA GROUND PIN (OPTIONAL) Header OPTIONAL PINS +.002 .017 (0.43) DIA -.001 .370 (9.40) DIA MAX Enclosure 1-12 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.CII Low Signal Relays CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Operating Characteristics Environmental Characteristics Semiconductor Characteristics MS, MSD, MSDD (Continued) Timing Temperature Range Diode Operate Time 4.0 ms max. -65C to +125C 100 Vdc peak inverse voltage (PIV) 1 Release Time 1.0 Vdc max. transient voltage Weight MS 2.0 ms max. 0.12 oz. (3.40 grms) MSD/MSDD 7.5 ms max. 0.13 oz. (3.45 grms) with spreader pad (suppression diode, suppression/ attached steering diodes) Vibration Resistance Contact Bounce 1.5 ms max 30 Gs, 10 to 3,000 Hz Dielectric Withstanding Voltage Shock Resistance Between Open Contacts 75 Gs, 6 1 ms max. 500 Vrms 60 Hz QPL Approval Between Adjacent Contacts MIL-R-39016/11 (JMS) 500 Vrms 60 Hz MIL-R-39016/16 (JMSD) Between Contacts & Coil MIL-R-39016/21 (JMSDD) 500 Vrms 60 Hz Insulation Resistance 10,000 megohms min. 500 Vdc 1,000 megohms 500 Vdc (coil to case +125C) .103 (2.62) .156 (3.96) .014 .003 (0.36) .370 (9.40) SQ MAX .395 (10.03) SQ MAX 0.47 (1.19) DIA .100 (2.54) .150 (3.81) .100 (2.54) .100 (2.54) .140 .175 DIA (3.56 4.45) S S2 W Spreader & Mounting Pads Coil Data Coil Pickup Pickup Drop-Out Drop-Out Nom. Coil Circuit Coil Circuit Base Turn Base Turn Nom. Coil Resistance Voltage Voltage Voltage Voltage Max. Coil Current Current On Current On Current Power Coil in Ohms Vdc (Max.) Vdc (Max.) Vdc (Min.) Vdc (Min.) Coil Voltage mA (Max.) mA (Min.) mA (Max.) mA (Max.) (mW) Desig. 10% 25C 25C 125C 25C -65C Voltage (Vdc) (Note 1&2) (Note 1&2) 25C 125C 25C (Note 1) (Note 2) (Note 2) (Note 2) (Note 2) MS/MSD 5.0 100 n/a n/a 2.6 n/a 3.5 n/a 0.23 0.12 250 7.5 5 6.0 200 n/a n/a 3.4 n/a 4.5 n/a 0.28 0.18 180 10.0 6 9.0 400 n/a n/a 4.85 n/a 6.8 n/a 0.55 0.35 203 15.0 9 12.0 850 n/a n/a 7.0 n/a 9.0 n/a 0.64 0.41 169 20.0 12 18.0 1,600 n/a n/a 9.8 n/a 13.5 n/a 0.92 0.59 203 30.0 18 26.5 3,300 n/a n/a 14.0 n/a 18.0 n/a 1.4 0.89 213 40.0 26 36.0 6,500 n/a n/a 20.0 n/a 27.0 n/a 1.8 1.25 199 57.0 36 48.0 11,000 n/a n/a 25.8 n/a 36.0 n/a 2.4 1.60 209 75.0 48 MSDD 5.0 64 78.1 56.8 2.9 n/a 3.7 n/a 0.8 0.7 391 7.0 5 6.0 125 48.9 36.3 4.0 n/a 4.8 n/a 0.9 0.8 288 10.0 6 9.0 400 23.6 18.1 6.1 n/a 8.0 n/a 1.1 0.9 203 15.0 9 12.0 850 15.0 11.7 7.8 n/a 11.0 n/a 1.3 1.0 169 20.0 12 18.0 1,600 12.2 9.6 11.3 n/a 14.5 n/a 1.5 1.1 203 30.0 18 26.5 3,300 8.8 7.0 15.2 n/a 19.0 n/a 1.7 1.3 213 40.0 26 36.0 6,500 6.1 4.9 21.7 n/a 27.2 n/a 2.3 1.7 199 57.0 36 48.0 11,000 4.8 3.9 27.8 n/a 34.8 n/a 2.8 2.0 209 75.0 48 Notes: 1. Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25C for 5 seconds max. 2. Set base current at 3 mA to 15 mA during measurements. Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example: Type Terminal Diodes Ground Pins Coils Spreader/Mounting Pads MS CD G -26 S * The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 1-13 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.