MT6000-3/16-0-SP
Heat Shrink Tubing, Black, Single Wall Type, 4.75 Expanded Inside Diameter (Min) .
187 Expanded Inside Diameter (Min)
MT6000-3/16-0-SP ACTIVE
TE Internal #: CP4175-000
Heat Shrink Tubing, Black, Single Wall Type, 4.75 Expanded Inside
Diameter (Min) .187 Expanded Inside Diameter (Min)
View on TE.com>
Heat Shrink Tubing
Primary Product Color: Black
Wall Type: Single
Expanded Inside Diameter (Min): 4.75 mm [ .187 in ]
Recovered Inside Diameter (Max): 1.19 mm [ .093 in ]
Shrink Ratio: 4:1
Features
Product Type Features
Product Family MT6000
Wall Type Single
Electrical Characteristics
Voltage (Max) 1 kV
Body Features
Fluid Type Medical Fluids, Water
Primary Product Color Black
Shrink Ratio 4:1
Primary Product Material Medical Grade Crosslinked Polyolefin
Flexibility Flexible
Dimensions
Recovered Wall Thickness (Nominal) .5 mm[.02 in]
Expanded Inside Diameter (Min) 4.75 mm[.187 in]
Recovered Inside Diameter (Max) 1.19 mm[.093 in]
Usage Conditions
Fluid Resistance Moisture/Spray Protection, Splash
Protection
Shrink Temperature (Min) 110 C
Heat Shrink Tubing Flammability Non-Flame-Retardant
Operating Temperature Range -40 110 C
Heat Shrink Tubing Resistance Fluids, Impact, Radiation Sterilization, Strain
Recovery Temperature 110 C
Product Availability
01/31/2021 06:10PM | Page1
For support call+1 800 522 6752
MT6000-3/16-0-SP
Heat Shrink Tubing, Black, Single Wall Type, 4.75 Expanded Inside Diameter (Min) .
187 Expanded Inside Diameter (Min)
Product Availability
Applicable Region Global
Packaging Features
Packaging Method Cut Piece, Spool, Stick
Other
Product Source US
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU Compliant
EU ELV Directive 2000/53/EC Compliant
China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUN 2020
(209)
Not Yet Reviewed
Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per
homogenous material. Also BFR/CFR/PVC
Free
Solder Process Capability Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in
articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for
substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished
product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An
Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling
based on the new ECHA Guidance on requirements for substances in articles (June 2017, version 4.0) and will be
updating its statements accordingly.
Customers Also Bought
01/31/2021 06:10PM | Page2
For support call+1 800 522 6752