VERSAFIT (2:1 RATIO) Single Wall tube. A Premium grade heat shrink tube primarily used for electrical insulation. Has a UL224 approval and several Military related approvals. Available in several colours. PRODUCT DIMENSIONS SIZE Inside Diameter as Inside Diameter Wall Thickness after Wall Thickness supplied (min) after recovery (max) recovery (nom) Tolerance after mm (inch) mm (inch) mm (inch) recovery D d W mm (inch) 3/64 1.43 (0.056) 0.58 (0.023) 0.40 (0.016) 0.16 (0.006) 1/16 1.65 (0.066) 0.79 (0.031) 0.43 (0.017) 0.16 (0.006) 3/32 2.59 (0.103) 1.17 (0.046) 0.51 (0.020) 0.16 (0.006) 1/8 3.23 (0.128) 1.57 (0.062) 0.51 (0.020) 0.16 (0.006) 3/16 4.91 (0.193) 2.36 (0.093) 0.51 (0.020) 0.16 (0.006) 1/4 6.81 (0.268) 3.17 (0.125) 0.64 (0.025) 0.16 (0.006) 3/8 9.76 (0.384) 4.74 (0.187) 0.64 (0.025) 0.16 (0.006) 1/2 13.32 (0.524) 6.35 (0.250) 0.64 (0.025) 0.16 (0.006) 5/8 16.50 (0.650) 8.00 (0.315) 0.76 (0.030) 0.16 (0.006) 3/4 20.05 (0.790) 9.52 (0.375) 0.76 (0.030) 0.16 (0.006) 1 26.40 (1.040) 12.7 (0.500) 0.88 (0.035) 0.25 (0.010) 1-1/4 32.70 (1.290) 15.88 (0.625) 1.01 (0.040) 0.31 (0.012) 1-1/2 39.08 (1.540) 19.05 (0.750) 1.01 (0.040) 0.31 (0.012) 2 51.83 (2.040) 25.4 (1.000) 1.14 (0.045) 0.36 (0.014) 3 77.49 (3.050) 38.10 (1.500) 1.27 (0.050) 0.41 (0.016) 4 102.84 (4.100) 50.08 (2.000) 1.39 (0.055) 0.46 (0.018) ----- ----- VERSAFIT (2:1 RATIO) STANDARD SIZE REFERENCE 2020 TE Connectivity Ltd. family of companies DIMENSIONAL DRAWING All Rights Reserved DIMENSIONS IN TITLE mm (Inch) VERSAFIT (2:1 RATIO) IRRADIATED MODIFIED POLYOLEFIN SINGLE WALL HEAT SHRINK TUBING SHEET NO REV 1 of 2 VERSAFIT (2:1 RATIO) Standard Sizes A REV ENGINEERING CHANGE CHK DATE VERSAFIT (2:1 RATIO) PRODUCT INFORMATION General use single wall Polyolefin Tubing. Shrink Ratio 2:1 Longitudinal Shrinkage on full recovery 0 to -5% Material conforms to TE Specification RW-3009 Standard Colours: Black, White, Red, Blue, Yellow Non-Standard Colours: Brown, Orange, Green, Violet, Grey Flame Retardant Tubing cut to specific lengths can be supplied from the product sizes referenced within this drawing. Cut length tolerances are as per the following table: STANDARD CUTTING TOLERANCES (mm) CUT LENGTH TOLERANCE Up to 9.9mm 0.5mm 10mm to 24.9mm 1.0mm 25mm to 54.9mm 1.5mm 55mm to 99.9mm 3.0mm 100mm to 149.9mm 4.0mm 150mm to 499.9mm 5.0mm 500mm to 1200mm 12.5mm SHEET NO. REV VERSAFIT (2:1 RATIO) TE Connectivity Ltd. family of companies Standard sizes 2 of 2 A