SPECIFICATION: RW 2514 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2514 Document Number 108-121017 NBC MARKER SYSTEM (Ladder Form) NBC-SCE 1. SCOPE NBC-SCE Markers are designed for use where extreme resistance to cleaning solvents is needed. The mark is permanent upon shrinking the Marker. The markers are suitable for use in wire harness systems requiring high fluid resistance and resistance to the effects of nuclear, biological and chemical agent exposure and decontamination. The markers should be used with an appropriate transparent oversleeve (TMS-CCUV) whose ends are sealed with an appropriate epoxy adhesive. 1.1 CLASSIFICATION 1.1.1 Markers The Markers shall be fabricated from radiation crosslinked modified fluoropolymer tubing, flattened and mounted on a carrier in a ladder configuration. 1.1.2 System Equipment The recommended Printer Ribbon Systems for use with NBC-SCE are shown in the latest version of document 411-121005 Identification Printer Product Ribbon Matrix. System performance is evaluated in this specification REVISION HISTORY Revision Description of change Date Incorporated By Number 1 Replaces RT-1809 issue 2 July 2004 - 2 Format update February 2014 M Priddle While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company RW-2514 Issue 2 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. If this document is printed it becomes uncontrolled. Page 2 SPECIFICATION RW 2514- ISSUE 2 2. APPLICABLE DOCUMENTS This specification takes precedence over documents referenced herein. Unless otherwise specified, the latest issue of the referenced documents applies. The following documents form a part of this specification. 2.1 GOVERNMENT FURNISHED DOCUMENTS Military MIL-STD-202 Test Methods for Electronic and Electrical Component Parts MIL-H-5606 Hydraulic Fluid, Petroleum Base, Aircraft, Missile and Ordnance MIL-T-5624 Turbine Fuel, Aviation, Grades JP-4 and JP-5 MIL-L-7808 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base MIL-A-8243 Anti-Icing and Deicing-Defrosting Fluid 2.2 OTHER PUBLICATIONS American Society for Testing and Materials (ASTM) ASTM D 876 Testing Non-rigid Vinyl Chloride Polymer Tubing used for Electrical Insulation ASTM D 2671 Testing Heat-Shrinkable Tubing for Electrical Use ASTM G 21 Recommended Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi SAE International SAE-AS-81531 Marking of Electrical Insulating Materials 3. REQUIREMENTS 3.1 MATERIAL The sleeving shall be fabricated from irradiated, thermally-stabilized, modified polyvinylidene fluoride compound. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles, seams, cracks or inclusions. 3.2 COLOR The markers shall be white, unless otherwise specified. 3.3 FORM The sleeves shall be cut lengths mounted on a carrier in a ladder configuration in accordance with Figure 1 and shall be suitable for automatic marking with systems recommended in Doc 411-121005. 3.4 PROPERTIES The sleeves shall meet the requirements of Table 3. 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company RW-2514 Issue 2 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. If this document is printed it becomes uncontrolled.