Tyco Electronics Corporation Specification RT-511 305 Constitutional Drive This Issue: Issue 11 Menlo Park, CA 94025 USA Date: 16-Jun-15 Replaces: Issue 10 RAYCHEM NT-FR TUBING Neoprene, Fluid Resistant, Flexible, Heat-Shrinkable 1.0 SCOPE This specification covers the requirements for one type of highly flexible, electrically insulating, extruded tubing whose diameter will reduce to a predetermined size upon the application of heat in excess of 135C (275F). 2.0 APPLICABLE DOCUMENTS This specification takes precedence over documents references herein. Unless otherwise specified, the latest issue of referenced documents applies. The following documents form a part of this specification to the extent specified herein. 2.1 GOVERNMENT-FURNISHED DOCUMENTS Military MIL-PRF-5606H Hydraulic Fluid, Petroleum Base, Aircraft, Missile, and Ordnance, NATO no. H-515. MIL-PRF-7808L Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, Grade 3 NATO no. O-148, Grade 4 NATO no. O-163. SAE-AMS-1424 Anti-Icing and Deicing - Defrosting Fluid MIL-PRF-23699F Lubricating Oil, Aircraft Turbine Engines, Synthetic Base, NATO no. O-156 MIL-DTL-46162E Fuel, Diesel, Referee Grade MIL-PRF-46170D Hydraulic Fluid, Rust Inhibited, Fire-Resistant, Synthetic Hydrocarbon Base, NATO code no. H-544. MIL-DTL-83133G Turbine Fuels, Aviation, Kerosene Types, (NATO F-34) JP-8, (NATO F-35) and JP8+100, (NATO F-37). Federal A-A-694D Sodium Chloride, Technical A-A-59133B Cleaning Compound, High Pressure (Steam) Cleaner If this document is printed it becomes uncontrolled. Check for the latest revision. Page 2 SPECIFICATION RT-511 ISSUE 11 2.2 OTHER PUBLICATIONS American Society for Testing and Materials (ASTM) D 257 Standard Test Methods for d-c Resistance or Conductance of Insulating Materials D 412 Standard Test Methods for Rubber Properties in Tension D 2240 Standard Test Method of Rubber Property - Durometer Hardness D 2671 Standard Methods of Testing Heat-Shrinkable Tubing for Electrical Use G 21 Standard Recommended Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi Copies of ASTM publications may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103. International Organization for Standardization (ISO) ISO 846 Plastics Evaluation of the Action of Microorganisms Copies of ISO publications may be obtained from the International Organization for Standardization, 1, rue de Varemb, CH-1211 Geneva 20, Switzerland or at