Catalog 1308242Catalog 1308242 Catalog 1308242Catalog 1308242 Catalog 1308242 Catalog 1308242 Catalog 1308242 Catalog 1308242 Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) OEG Issued 3-03 (PDF Rev. 11-04) OEG Issued 3-03 (PDF Rev. 11-04) OEG Issued 3-03 (PDF Rev. 11-04) OEG Issued 3-03 (PDF Rev. 11-04)Issued 3-03 (PDF Rev. 11-04) OEGOEG Issued 3-03 (PDF Rev. 11-04) OEG Issued 3-03 (PDF Rev. 11-04) OEG Issued 3-03 (PDF Rev. 11-04) OEG General Purpose Relays General Purpose RelaysGeneral Purpose Relays General Purpose Relays Ordering Information Ordering Information Ordering Information Ordering Information Ordering Information Ordering Information Ordering Information Ordering Information Ordering Information PCB RelaysPCB Relays PCB Relays OEGOEG PCB Relays OEG OEG Typical Part Number B OJE -SH -1 12 L M H F ,095Typical Part Number B OJE -SH -1 12 L M H F ,095 Typical Part Number B OJE -SH -1 12 L M H F ,095Typical Part Number B OJE -SH -1 12 L M H F ,095 Typical Part Number Typical Part Number BB OJEOJE -SH-SH -1-1 1212 LL MM HH FF ,095,095 Typical Part Number B OJE -SH -1 12 L M H F ,095Typical Part Number B OJE -SH -1 12 L M H F ,095 Typical Part Number B OJE -SH -1 12 L M H F ,095 1.1. Basic Series:Basic Series: 1.1. Basic Series:Basic Series: 1. Basic Series: 1. Basic Series: 1. Basic Series: 1. Basic Series: 1. Basic Series: OJ = 4kV dielectric, coil and contacts.OJ = 4kV dielectric, coil and contacts. OJ = 4kV dielectric, coil and contacts.OJ = 4kV dielectric, coil and contacts. OJ = 4kV dielectric, coil and contacts.OJ = 4kV dielectric, coil and contacts. OJ = 4kV dielectric, coil and contacts. OJ = 4kV dielectric, coil and contacts. Miniature PCB Relay OJ/OJE OJ = 4kV dielectric, coil and contacts. Miniature PCB Relay OJ/OJE Miniature PCB Relay OJ/OJE Miniature PCB Relay OJ/OJE OJE = 3kV dielectric, coil and contacts.OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts.OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. 2.2. Enclosure:Enclosure: 2.2. Enclosure:Enclosure: 2.2. Enclosure:Enclosure: 2. Enclosure: 2. Enclosure: 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover.SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover. SS = Vented (Flux-tight)*, plastic cover. n nn 3 to 10A rating n 3 to 10A rating3 to 10A rating 3 to 10A ratingSH = Sealed, plastic case. SH = Sealed, plastic case. SH = Sealed, plastic case. SH = Sealed, plastic case. SH = Sealed, plastic case.SH = Sealed, plastic case. SH = Sealed, plastic case. SH = Sealed, plastic case. SH = Sealed, plastic case. nn n Small sizeSmall size3.3. Termination:Termination: 3.3. Termination:Termination: 3. Termination: n Small size 3. Termination: Small size3. Termination: 3. Termination: 3. Termination: 1 = 1 pole1 = 1 pole 1 = 1 pole1 = 1 pole 1 = 1 pole1 = 1 pole 1 = 1 pole 1 = 1 pole 1 = 1 pole n nn 4000V coil to contact dielectric strength (OJ type) n 4000V4000V rms coil to contact dielectric strength (OJ type) coil to contact dielectric strength (OJ type) 4000Vrmsrms coil to contact dielectric strength (OJ type) rms 4.4. Coil Voltage:Coil Voltage: 4.4. Coil Voltage:Coil Voltage: 4. Coil Voltage: 4. Coil Voltage: 4. Coil Voltage: 4. Coil Voltage: 4. Coil Voltage: nn n Sensitive coil optionalSensitive coil optional n Sensitive coil optional Sensitive coil optional05 = 5VDC05 = 5VDC 09 = 9VDC09 = 9VDC 24 = 24VDC24 = 24VDC 05 = 5VDC05 = 5VDC 09 = 9VDC09 = 9VDC 24 = 24VDC24 = 24VDC 05 = 5VDC05 = 5VDC 09 = 9VDC09 = 9VDC 24 = 24VDC24 = 24VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC06 = 6VDC 12 = 12VDC12 = 12VDC 48 = 48VDC48 = 48VDC 06 = 6VDC06 = 6VDC 12 = 12VDC12 = 12VDC 48 = 48VDC48 = 48VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: 5.5. Coil Input/Contact Rating:Coil Input/Contact Rating: 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: L = Sensitive (200mW) Coil, 3A Contacts**L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A ContactsD = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts**L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A ContactsD = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts H = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A ContactsH = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil, 10A Contacts 6.6. Contact Arrangement:Contact Arrangement: 6.6. Contact Arrangement:Contact Arrangement: 6. Contact Arrangement: 6. Contact Arrangement: 6. Contact Arrangement: 6. Contact Arrangement: 6. Contact Arrangement: M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NOM = 1 Form A, SPST-NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO 7.7. High Capacity Contact Rating Option for Sensitive Coil:High Capacity Contact Rating Option for Sensitive Coil: 7.7. High Capacity Contact Rating Option for Sensitive Coil:High Capacity Contact Rating Option for Sensitive Coil: 7. High Capacity Contact Rating Option for Sensitive Coil: 7. High Capacity Contact Rating Option for Sensitive Coil: 7. High Capacity Contact Rating Option for Sensitive Coil: 7. High Capacity Contact Rating Option for Sensitive Coil:F0277-CF0277-C 7. High Capacity Contact Rating Option for Sensitive Coil: F0277-C F0277-C H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code).H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code). H = 8A Contacts (Only available with Coil Input/Contact Rating code). TTTypical aypical aypical applicapplicapplicationstionstions Typical applications 8.8. Insulation System:Insulation System: 8.8. Insulation System:Insulation System: 8. Insulation System: Appliances,8. HVInsulation System:AC, industrial control 8. Insulation System: 8. Insulation System: AAppliances,ppliances, HV HVAC,AC, industrial control industrial control 8. Insulation System: Appliances, HVAC, industrial control Leave Blank = Class A (105C) F = Class F (155C) Leave Blank = Class A (105C) F = Class F (155C) Leave Blank = Class A (105C) F = Class F (155C) Leave Blank = Class A (105C) F = Class F (155C) Leave Blank = Class A (105Leave Blank = Class A (105C)C) F = Class F (155F = Class F (155C)C) Leave Blank = Class A (105C) F = Class F (155C) Leave Blank = Class A (105C) F = Class F (155C) Leave Blank = Class A (105C) F = Class F (155C) VVZZtt VZt VZt 9.9. Suffix:Suffix: 9.9. Suffix:Suffix: 9. Suffix: 9. Suffix: 9. Suffix: 9. Suffix: 9. Suffix: ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS ,000 = Standard model for enclosure codeSOther Suffix = Custom model ,095 = Standard model for enclosure codeS Other Suffix = Custom model ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS ,000 = Standard model for enclosure codeSOther Suffix = Custom model ,095 = Standard model for enclosure codeS Other Suffix = Custom model ,000 = Standard model for enclosure codeS,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS,095 = Standard model for enclosure codeS Other Suffix = Custom modelOther Suffix = Custom model,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS ,000 = Standard model for enclosure codeSOther Suffix = Custom model ,095 = Standard model for enclosure codeS Other Suffix = Custom model ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS Other Suffix = Custom model * Not suitable for immersion cleaning processes.* Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes.* Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information.** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information.** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Orderi** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information.ng Information. ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information.** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information.Approvals Coil Data ApprApprovalsovals Coil Data Coil Data Approvals Coil Data VDE 40007630, TUV R 50139166, UL E82292, CQC03001007764 Coil voltage range 3 to 48VDC VDE 40007630, TUV R 50139166, UL E82292, CQC03001007764VDE 40007630, TUV R 50139166, UL E82292, CQC03001007764 Coil voltage rangeCoil voltage range 3 to 48VDC3 to 48VDC VDE 40007630, TUV R 50139166, UL E82292, CQC03001007764 Coil voltage range 3 to 48VDC TTechnical data of apprechnical data of approved types on roved types on requestequest Operative range, IEC 61810 2 Technical data of apprOur authorized distributors are more likely to stock the following items for immediate delivery.Our authorized distributors are more likely to stock the following items for immediate delivery.oved types on request Operative range, IEC 61810Operative range, IEC 61810 Our authorized distributors are more likely to stock the following items for immediate delivery.Our authorized distributors are more likely to stock the following items for immediate delivery.22 Our authorized distributors are more likely to stock the following items for immediate delivery.Technical data of apprOur authorized distributors are more likely to stock the following items for immediate delivery.oved types on request Operative range, IEC 61810 Our authorized distributors are more likely to stock the following items for immediate delivery.2 Our authorized distributors are more likely to stock the following items for immediate delivery. Our authorized distributors are more likely to stock the following items for immediate delivery. Coil insulation system according UL Class E, F Coil insulation system accorCoil insulation system according ULding UL Class E, FClass E, F Coil insulation system accorOJE-SH-124LMH,095 ding UL Class E, F OJE-SH-124LMH,095 OJ-SH-105HM,095OJ-SH-105HM,095 OJE-SH-105DM,095OJE-SH-105DM,095 OJE-SH-112HM,095OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-105HM,095OJ-SH-105HM,095 OJE-SH-105DM,095OJE-SH-105DM,095 OJE-SH-112HM,095OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 Contact DataContact DataContact Data Contact DataOJ-SH-112LMH,095 OJE-SH-112DM,095OJE-SH-112DM,095 OJE-SH-105LMH,095OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJE-SH-112DM,095OJE-SH-112DM,095 OJE-SH-105LMH,095OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJ-SH-112LMH,095 OJ-SH-112LMH,095OJ-SH-112LMH,095 OJE-SH-112DM,095OJE-SH-112DM,095 OJE-SH-105LMH,095OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 Contact arrangementContact arrangementContact arrangement 1 form A, 1 NO1 form A, 1 NO1 form A, 1 NO Coil versions, DC coil, OJ/OJE-L sensitive typeCoil versions, DC coil, OJ/OJE-L sensitive typeCoil versions, DC coil, OJ/OJE-L sensitive type OJ-SH-124LMH,095OJ-SH-124LMH,095 OJE-SH-124DM,095OJE-SH-124DM,095 OJE-SH-112LMH,095OJE-SH-112LMH,095 OJ-SH-124LMH,095OJ-SH-124LMH,095 OJE-SH-124DM,095OJE-SH-124DM,095 OJE-SH-112LMH,095OJE-SH-112LMH,095 OJ-SH-124LMH,095 OJE-SH-124DM,095OJE-SH-124DM,095 OJE-SH-112LMH,095OJE-SH-112LMH,095 Contact arrangementOJ-SH-124LMH,095 OJE-SH-124DM,095 1 form A, 1 NOOJE-SH-112LMH,095Coil versions, DC coil, OJ/OJE-L sensitive typeOJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 Rated voltageRated voltageRated voltage 30VDC, 250V30VDC, 250V30VDC, 250VACACAC CoilCoilCoil RatedRatedRated OperateOperateOperate ReleaseReleaseRelease CoilCoilCoil Rated coilRated coilRated coil Rated voltage 30VDC, 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltageMax. switching voltageMax. switching voltage 30VDC, 277V30VDC, 277V30VDC, 277VACACAC codecodecode voltagevoltagevoltage voltagevoltagevoltage voltagevoltagevoltage rrresistanceesistanceesistance powerpowerpower Max. switching voltageOutline DimensionsOutline Dimensions 30VDC, 277VAC code Wiring Diagram (Bottom View)Wiring Diagram (Bottom View)voltage voltageOutline DimensionsOutline Dimensions voltage resistance power Wiring Diagram (Bottom View)Wiring Diagram (Bottom View) Outline Dimensions Wiring Diagram (Bottom View)Wiring Diagram (Bottom View) Wiring Diagram (Bottom View) Wiring Diagram (Bottom View) Outline Dimensions Outline Dimensions Outline Dimensions Outline Dimensions Wiring Diagram (Bottom View) Rated currRated currRated currententent 3 to 10A3 to 10A3 to 10A VDCVDCVDC VDCVDCVDC VDCVDCVDC 10%10%10% mWmWmW Rated current 3 to 10A VDC VDC VDC 10% mW Contact materialContact material Ag, AgSnO, AgCdOAg, AgSnO, AgCdO 003003 33 2.252.25 0.150.15 4545 200200 Contact material Ag, AgSnO, AgCdO 003 3 2.25 0.15 45 200 Contact material Ag, AgSnO, AgCdO 003 3 2.25 0.15 45 200 Min. rMin. recommended contact loadecommended contact load 100mA, 5VDC100mA, 5VDC 005005 55 3.753.75 0.250.25 125125 200200 Min. recommended contact load 100mA, 5VDC 005 5 3.75 0.25 125 200 Min. recommended contact load 100mA, 5VDC 005 5 3.75 0.25 125 200 FrFrequency of operationequency of operation 360 ops./h360 ops./h 006006 66 4.54.5 0.30.3 180180 200200 Frequency of operation 360 ops./h 006 6 4.5 0.3 180 200 Frequency of operation 360 ops./h 006 6 4.5 0.3 180 200 .58 .58 .02 .02 .58 .58 .02 .02 .58 .58 .02 .02 .58 .02 .58 .02 .58 .02 Operate time max.Operate time max. OJ/OJE-L: 15msOJ/OJE-L: 15ms(14.7 (14.7 .5) .5) 009009 99 6.756.75 0.450.45 405405 200200 (14.7 (14.7 .5) .5) (14.7 .5) Operate time max. OJ/OJE-L: 15ms(14.7 .5) 009 9 6.75 0.45 405 200 (14.7 .5) (14.7 .5) Operate time max. OJ/OJE-L: 15ms 009 9 6.75 0.45 405 200 (14.7 .5) OJ/OJE-D/H: 10msOJ/OJE-D/H: 10ms 012012 1212 99 0.60.6 720720 200200 OJ/OJE-D/H: 10ms 012 12 9 0.6 720 200 OJ/OJE-D/H: 10ms 012 12 9 0.6 720 200 Release time max.Release time max. 4ms4ms 024024 2424 1818 1.21.2 28802880 200200 Release time max. 4ms 024 24 18 1.2 2880 200 Release time max. 4ms 024 24 18 1.2 2880 200 Electrical enduranceElectrical endurance 048048 4848 3636 2.42.4 1152011520 200200 Electrical endurance 048 48 36 2.4 11520 200 Electrical endurance 048 48 36 2.4 11520 200 33 3 All figures are given for coil without pre-energization, at ambient temperature +23C LMLM 3A, 250V3A, 250VAC, rAC, res., -30C to +95Ces., -30C to +95C 100x10100x103 ops. ops. All figurAll figures ares are given for coil without pre given for coil without pre-energization, at ambient temperature-energization, at ambient temperature +23Ce +23C LM 3A, 250VAC, res., -30C to +95C 100x10 ops. All figures are given for coil without pre-energization, at ambient temperature +23C LM 3A, 250VAC, res., -30C to +95C 100x10 ops157 .157 .012 .012 .157 .157 .012 .012 .157 .012 .157 .012 .157 .012 .157 .012 .157 .012 33 3 DMDM 5A, 250V5A, 250VAC, rAC, res, -30C to +85C es, -30C to +85C (4.00 .3) 60x1060x103 ops. ops. (4.00 .3) DM 5A, 250VAC, res, -30C to +85C (4.00 .3) 60x10 ops. (4.00 .3) (4.00 (4.00 .3) .3) DM 5A, 250VAC, res, -30C to +85C (4.00 .3) 60x10 ops. (4.00 .3) (4.00 .3) .012 .012 .018 x .018 .012 33 .018 x .018 .012 .012.012 .018 x .018 .012 3 .018 x .018 .012 .018 x .018.018 x .018 .012 LMH(2)LMH(2) .018 x .018 8A, 250V8A, 250VAC, rAC, res., -30C to +70C es., -30C to +70C 100x10100x103 ops. Coil versions, DC coil, OJ/OJE-D and -H type .018 x .018 .018 x .018 LMH(2) 8A, 250VAC, res., -30C to +70C 100x10 ops. ops. Coil versions, DC coil, OJ/OJE-D and -H type Coil versions, DC coil, OJ/OJE-D and -H type LMH(2) 8A, 250VAC, res., -30C to +70C 100x10 ops. Coil versions, DC coil, OJ/OJE-D and -H type (.3) (.3) (.45 x .45) (.3) .039 (.45 x .45) (.3) .039 (.3)(.3) (.45 x .45) (.3) .012.012 .039.039 .039 (.45 x .45) (.3) .012.012 .039.039 .039 (.45 x .45)(.45 x .45) (.3) .012 .039.039 .039.039 (.45 x .45) .012 .039 .039 (.45 x .45) .012 .039 .039 (.45 x .45) .012 .039 33 PC Board Layout (Bottom View) PC Board Layout (Bottom View) .012 .039 3 PC Board Layout (Bottom View) PC Board Layout (Bottom View) PC Board Layout (Bottom View)PC Board Layout (Bottom View) LMH2 8A, 250VAC,res., -30C to +85C 30x103 ops. Coil PC Board Layout (Bottom View)Rated Operate Release Coil Rated coil PC Board Layout (Bottom View) PC Board Layout (Bottom View) LMH2LMH2 8A, 250V8A, 250VAC,rAC,res., -30C to +85C es., -30C to +85C 30x1030x10 ops. ops. CoilCoil RatedRated OperateOperate ReleaseRelease CoilCoil Rated coilRated coil LMH2 8A, 250VAC,res., -30C to +85C (.3)(.3) 30x10(1.0)(1.0) ops. (1.0)(1.0) Coil Rated Operate Release Coil Rated coil(.3)(.3) (1.0)(1.0) (1.0)(1.0) (.3) (1.0) (1.0)(1.0) (1.0) (1.0) (1.0) (1.0) (.3) (1.0) (.3) (.3) (.3) (1.0) (1.0) 33 3 HM 10A, 250VAC, res., -30C to +70C 100x103 ops. code voltage voltage voltage resistance power HMHM 10A, 250V10A, 250VAC, rAC, res., -30C to +70C es., -30C to +70C 100x10100x10 ops. ops. codecode voltagevoltage voltagevoltage voltagevoltage rresistanceesistance powerpower HM 10A, 250VAC, res., -30C to +70C 100x10 ops. code voltage voltage voltage resistance power 4 .05 DIA4 .05 DIA 4 .05 DIA4 .05 DIA 4 .05 DIA 33 4 .05 DIA 4 .05 DIA 4 .05 DIA 3 4 .05 DIA HM2 10A, 250VAC, res., -30C to +85C 10x103 ops. VDC VDC VDC 10% mW HM2HM2 10A, 250V10A, 250VAC, rAC, res., -30C to +85C es., -30C to +85C 10x1010x10 ops. ops. VDCVDC VDCVDC VDCVDC 10%10% mWmW HM2 10A, 250VAC, res., -30C to +85C 10x10 ops. VDC VDC VDC 10% mW (1.3)(1.3) .067 (1.3)(1.3) .067 (1.3) .067 .067 (1.3) .067.067 (1.3) .067 (1.3) .067 (1.3) .067 .401 .401 .02 .02 .401 .401 .02 .02 .401 .02 .401 .02 .401 .02 .401 .02 .401 .02 Contact ratings 003 3 (1.71)2.1 0.15 20 450 (1.71) Contact ratingsContact ratings 003003 33 (1.71) 2.12.1 0.150.15 2020 450450 (1.71) (1.71)(1.71) Contact ratings 003 3 (1.71) 2.1 0.15 20 450 (1.71) (1.71) (10.2 (10.2 .5) .5) (10.2 (10.2 .5) .5) (10.2 .5) (10.2 .5) (10.2 .5) (10.2 .5) (10.2 .5) LM .300 .300 3A, 250V .008 .008 AC 005 5 3.5 0.25 55.6 450.300 .300 .008 .008 .300 .008 LMLM .300 3A, 250V3A, 250V .008 ACAC 005005 55 3.53.5 0.250.25 55.6 55.6 450450.300 .008 .300 .008 LM 3A, 250VAC 005 5 3.5 0.25 55.6 450 .300 .008 (7.62 (7.62 .2) .2) (7.62 (7.62 .2) .2) (7.62 .2) (7.62 .2) (7.62 .2) (7.62 .2) (7.62 .2) DMDMDM 5A 250V5A 250V5A 250VACACAC 006006006 666 4.24.24.2 0.30.30.3 808080 450450450 DM 5A 250VAC 006 6 4.2 0.3 80 450 .300 .300 .004 .004 .300 .300 .004 .004 .300 .004 .300 .004 .300 .004 .300 .004 .300 .004 LMH(2)LMH(2)LMH(2) 8A 250V8A 250V8A 250VACACAC 009009009 999 6.36.36.3 0.450.450.45 180180180 450450450 LMH(2) 8A 250VAC 009 9 6.3 0.45 180 450 (7.6 (7.6 .1) .1) (7.6 (7.6 .1) .1) (7.6 .1) (7.6 .1) (7.6 .1) (7.6 .1) (7.6 .1) HM(2)HM(2)HM(2) 10A 250V10A 250V10A 250VACACAC 012012012 121212 8.48.48.4 0.60.60.6 320320320 450450450 HM(2) 10A 250V.067.067 AC 012 12 8.4 0.6 320 450.067.067 .067 .067 .067 .067 .067 6 (1.71)(1.71)66 (1.71)(1.71) (1.71) 6 (1.71) Mechanical endurance, DC coilMechanical endurance, DC coilMechanical endurance, DC coil 10x1010x1010x10(1.71) operations operations operations 024024024 242424 16.816.816.8 1.21.21.2 128012801280 450450450(1.71) (1.71) Mechanical endurance, DC coil 10x10 operations 024 24 16.8 1.2 1280 450 .500 .008 .500 .008 .500 .008 .500 .008 .500 .500 .008 .008 .500 .008 .500 .008 .500 .008 (12.70 .2) (12.70 .2) (12.70 .2) 048048048 484848 33.633.633.6.100 .004 2.42.42.4 (12.70 512051205120 .2) 450450450 .100 .004 (12.70 (12.70 .2) .2) (12.70 .2) 048 48 33.6.100 .004 2.4 (12.70 5120 .2) 450 .100 .004 (12.70 .2) .100 .100 .004 .004 .500 .004 .100 .004 .500 .004 .100 .004 .100 .004 .1 .008 .500 .004 .1 .008 .500 .004 .500 .500 .004 .004 .1 .008 .500 .004 .1 .008 .500 .004 .1 .1 .008 .008 .500 .004 .1 .008 .1 .008 .1 .008 (2.54 .1) (2.54 .1) (2.54 .1) (2.54 .1) (2.54 (2.54 .1) .1) All figurAll figures ares are given for coil without pre given for coil without pr(12.7 .1) e-energization, at ambient temperature-energization, at ambient temperatur(2.54 .1) e +23Ce +23C (12.7 .1) (2.54 .1) (2.54 .1) All figures are given for coil without pr(12.7 .1) e-energization, at ambient temperature +23C (12.7 .1) (12.7 (12.7 .1) .1) .716 .02 (2.54 (2.54 .2) .2) All figures are given for coil without pr(12.7 .1) e-energization, at ambient temperatur.716 .02 e +23C (2.54 (2.54 .2) .2) (12.7 .1) (2.54 .2) (12.7 .1) .716 .02 (2.54 .2) .716 .02 (2.54 .2) .716 .716 .02 .02 (2.54 .2) .716 .02 .716 .02 .716 .02 (2.54 .2) (18.2 .5) (18.2 .5) (18.2 .5) (18.2 .5) (18.2 (18.2 .5) .5) (18.2 .5) (18.2 .5) (18.2 .5) Reference DataReference Data Reference DataReference Data Reference Data Reference Data Reference Data Reference Data Reference Data Electrical enduranceElectrical endurance Operate timeOperate time Coil temperaturCoil temperature risee rise Electrical enduranceCoil Temperature Rise Operate timeOperate Time Coil temperaturCoil Temperature RiseLife Expectancye rise Operate Time Life Expectancy Electrical enduranceCoil Temperature Rise Operate timeOperate Time Coil temperaturCoil Temperature RiseLife Expectancye rise Operate Time Life Expectancy Coil Temperature RiseCoil Temperature Rise Operate TimeOperate Time Life ExpectancyLife ExpectancyCoil Temperature Rise Operate Time Coil Temperature RiseLife Expectancy Operate Time Life Expectancy Coil Temperature Rise Operate Time Life Expectancy 101000 101000 100 1212 100 1212 100 12 100 6060 12 6060 12 60 12 100 60 60 60 12 60 HM type, 120VAC Res. HM type, 120VAC Res. HM type, 120VAC Res. HM type, 120VAC Res. HM type,HM type, 120V 120VAAC Res.C Res. HM type, 120VAC Res. HM type, 120VAC Res. HM type, 120VAC Res. 10 10 5050 10 5050 10 50 1010 10 10 50 10 50 50 50 LMH type,LMH type, 250V 250VAAC Res.C Res. LMH type,LMH type, 250V 250VAAC Res.C Res. LMH type, 250VAC Res. LMH type, 250VAC Res. LMH type, 250VAC Res. LMH type, 250VAC Res. LMH type, 250VAC Res. 8 8 8 8 8 4040 4040 40 8 40 8 40 8 40 8 40 30 6 301010 6 1010 1010 30 6 3010 6 10 3030 6 6 30 6 30 6 30 6 10 Operate Time Operate Time Operate Time Operate Time OperOperatate Timee Time Operate Time Operate Time Operate Time 2020 4 4 2020 4 4 20 4 20 20 20 4 4 4 20 4 LM type, 250VAC Res. LM type, 250VAC Res. LM type, 250VAC Res. LM type, 250VAC Res. LM type,LM type, 250V 250VAAC Res.C Res. LM type, 250VAC Res. LM type, 250VAC Res. LM type, 250VAC Res. 2 2 2 2 2 1010 2 1010 2 10 2 10 10 10 2 10 DM type,DM type, 250V 250VAAC Res.C Res. DM type,DM type, 250V 250VAAC Res.C Res. DM type,DM type, 250V 250VAAC Res.C Res. DM type, 250VAC Res. DM type, 250VAC Res. Release TimeRelease Time Release TimeRelease Time Release TimeRelease Time DM type, 250VAC Res. Release Time Release Time Release Time 11 11 1 1 1 1 1 0.1 0.20.2 0.3 0.4 0.5 0.6 0.7 0.1 0.20.2 0.3 0.4 0.5 0.6 0.7 0 01.1 2 0.20.2 0.3 0.4 0.5 0.6 0.7 0.1 0.20.2 0.3 0.4 0.5 0.6 0.7 0 1 2 0.2 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 0 01.1 2 33 0.345450.4 66 0.577 880.699 0.71010 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 33 4545 66 77 88 99 1010 00.1.1 0.2 0.30.3 0.40.4 0.50.5 0.60.6 0.70.7 00.1.1 0.2 0.30.3 0.40.4 0.50.5 0.60.6 0.70.7 00 11 22 30.1 450.2 60.3 7 0.488 90.510 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 01.1 2 0.23 0.3450.4 6 0.57 80.69 0.710 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 9 10 3 45 6 7 8 9 10 Contact Current (A) Contact Current (A) Coil PCoil Poowwerer (W) (W) Coil PCoil Poowwerer (W) (W) Contact CurrCoil PCoil Poowwerer (W) (W)ent (A) Coil PCoil Poowwerer (W) (W) Contact Current (A) Coil PCoil Poowwerer (W) (W) Coil Power (W) Contact CurrContact CurrCoil Pent ent o(A)(A)wer (W) Contact CurrCoil Power (W)ent (A) Contact Current (A) Coil Power (W) Contact Current (A) Coil Power (W) Coil Power (W) Coil Power (W) Coil Power (W) TTest rest relaelay:y: OJE-SH-1 OJE-SH-112LMH12LMH TTest rest relaelay:y: OJE-SH-1 OJE-SH-112LMH12LMH TTest rest relaelay:y: OJE-SH-1 OJE-SH-112LMH12LMH Test relay: OJE-SH-112LMH Test relay: OJE-SH-112LMH Test relay: OJE-SH-112LMH Dimensions are shown for Dimensions are in inches over Specifications and availabilityDimensions are shown for www.tycoelectronics.comDimensions are in inches over Specifications and availability www.tycoelectronics.com Dimensions are shown for Dimensions are in inches over Specifications and availabilityDimensions are shown for www.tycoelectronics.comDimensions are in inches over Specifications and availability www.tycoelectronics.com Dimensions are shown forDimensions are shown for Dimensions are in inches overDimensions are in inches over Specifications and availabilitySpecifications and availabilityDimensions are shown for www.tycoelectronics.comwww.tycoelectronics.comDimensions are in inches over Specifications and availabilityDimensions are shown for www.tycoelectronics.comDimensions are in inches over Specifications and availability www.tycoelectronics.com Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change.reference purposes only. Technical support:(millimeters) unless otherwise subject to change. Technical support: reference purposes only. (millimeters) unless otherwise subject to change.reference purposes only. Technical support:(millimeters) unless otherwise subject to change. Technical support: reference purposes only.reference purposes only. (millimeters) unless otherwise(millimeters) unless otherwise subject to change.subject to change. reference purposes only. Technical support:Technical support: (millimeters) unless otherwise subject to change.reference purposes only. Technical support:(millimeters) unless otherwise423423 subject to change. Technical support: 423423 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 423 423 423 423 423 specified. Refer to inside back cover.specified. Refer to inside back cover. specified. Refer to inside back cover.specified. Refer to inside back cover. specified.specified. Refer to inside back cover.Refer to inside back cover.specified. Refer to inside back cover.specified. Refer to inside back cover. specified. Refer to inside back cover. 111 1 06-2011,06-2011,01-2014, Rev Rev Rev... 0611 0611 0114 DaDaDatasheets and product specificatasheets and product specificatasheets and product specification tion tion DaDaDatasheets and product datasheets and product datasheets and product data is subject to the ta is subject to the ta is subject to the DaDaDatasheets,tasheets,tasheets, product da product da product data,ta,ta, Definitions secDefinitions sec Definitions sec--- 06-2011, Rev. 0611 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- wwwwwwwww.te.com.te.com.te.com according to IEC 61810-1 and to be used according to IEC 61810-1 and to be used according to IEC 61810-1 and to be used terms of the disclaimer and all chaterms of the disclaimer and all chaterms of the disclaimer and all chapters of pters of pters of tion,tion,tion, a a applicapplicapplication notes and all specification notes and all specification notes and all specifications tions tions www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 2011 2014 TTTyco Electronics Corporayco Electronics Corporayco Electronics Corporation,tion,tion, onlonlonly together with the y together with the y together with the Definitions section.Definitions section.Definitions section. the the the Definitions section,Definitions section,Definitions section, a a availavailavailable able able attt are subject to change.are subject to change.are subject to change. 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a a a TE Connectivity Ltd.TE Connectivity Ltd.TE Connectivity Ltd. compan compan companyyy Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) OEG Catalog 1308242 Ordering Information Issued 3-03 (PDF Rev. 11-04) OEG Catalog 1308242 Typical Part Number B OJE -SH -1 12 L M H F ,095 Ordering Information Issued 3-03 (PDF Rev. 11-04) OEG 1. Basic Series: Typical Part Number B OJE -SH -1 12 L M H F ,095 OJ = 4kV dielectric, coil and contacts. Ordering Information OJE = 3kV dielectric, coil and contacts. 1. Basic Series: Typical Part Number B OJE -SH -1 12 L M H F ,095 OJ = 4kV dielectric, coil and contacts. 2. Enclosure: OJE = 3kV dielectric, coil and contacts. Catalog 1308242 SS = Vented (Flux-tight)*, plastic cover. 1. Basic Series: 2. Enclosure:SH = Sealed, plastic case.OJ = 4kV dielectric, coil and contacts.Issued 3-03 (PDF Rev. 11-04) OEG OJE = 3kV dielectric, coil and contacts. SS = Vented (Flux-tight)*, plastic cover.Catalog 1308242 3. Termination: SH = Sealed, plastic case. Issued 3-03 (PDF Rev. 11-04) OEG 2. Enclosure: Ordering Information 1 = 1 pole Catalog 1308242 SS = Vented (Flux-tight)*, plastic cover. 3. Termination: 4. Coil Voltage: SH = Sealed, plastic case.Issued 3-03 (PDF Rev. 11-04) OEG Ordering Information 1 = 1 pole Typical Part Number B OJE -SH -1 12 L M H F ,095 05 = 5VDC 09 = 9VDC 24 = 24VDC 3. Termination: 4. Coil Voltage: 06 = 6VDC 12 = 12VDC 48 = 48VDC 1. Basic Series: Typical Part Number B OJE -SH -1 12 L M H F ,095 Ordering Information 1 = 1 pole 05 = 5VDC 09 = 9VDC 24 = 24VDC OJ = 4kV dielectric, coil and contacts. 5. Coil Input/Contact Rating: 06 = 6VDC4. Coil Voltage:12 = 12VDC 48 = 48VDC 1. Basic Series: Typical Part Number B OJE -SH -1 12 L M H F ,095 OJE = 3kV dielectric, coil and contacts. L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts 05 = 5VDC 09 = 9VDC 24 = 24VDC OJ = 4kV dielectric, coil and contacts. 5. Coil Input/Contact Rating: H = Standard (450mW) Coil, 10A Contacts 06 = 6VDC 12 = 12VDC 48 = 48VDC 1. Basic Series: OJE = 3kV dielectric, coil and contacts.2. Enclosure: L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts OJ = 4kV dielectric, coil and contacts.6.5. Contact Arrangement:Coil Input/Contact Rating: SS = Vented (Flux-tight)*, plastic cover.H = Standard (450mW) Coil, 10A Contacts 2. Enclosure: OJE = 3kV dielectric, coil and contacts. M = 1 Form A, SPST-NOL = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts SH = Sealed, plastic case. 6. Contact Arrangement: SS = Vented (Flux-tight)*, plastic cover. H = Standard (450mW) Coil, 10A Contacts 2. Enclosure: M = 1 Form A, SPST-NO7. High Capacity Contact Rating Option for Sensitive Coil: SH = Sealed, plastic case. 3. Termination: 6. Contact Arrangement: SS = Vented (Flux-tight)*, plastic cover. H = 8A Contacts (Only available with Coil Input/Contact Rating code). 1 = 1 pole 7. High Capacity Contact Rating Option for Sensitive Coil: 3. Termination: M = 1 Form A, SPST-NO SH = Sealed, plastic case. H = 8A Contacts (Only available with Coil Input/Contact Rating code). 8. Insulation System: 1 = 1 pole 4. Coil Voltage: 7. High Capacity Contact Rating Option for Sensitive Coil: 3. Termination: Leave Blank = Class A (105C) F = Class F (155C) 8. Insulation System: 05 = 5VDC 09 = 9VDC 24 = 24VDCH = 8A Contacts (Only available with Coil Input/Contact Rating code). 4. Coil Voltage: 1 = 1 pole Leave Blank = Class A (105C) F = Class F (155C) 9. Suffix: 05 = 5VDC06 = 6VDC 09 = 9VDC12 = 12VDC 24 = 24VDC48 = 48VDC 8. Insulation System: 4. Coil Voltage: 9. Suffix:,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS Other Suffix = Custom model Catalog 1308242 06 = 6VDC 12 = 12VDC 48 = 48VDC Leave Blank = Class A (105C) F = Class F (155C) 5. Coil Input/Contact Rating: 05 = 5VDC 09 = 9VDC 24 = 24VDC ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS Issued 3-03 (PDF Rev. 11-04)Other Suffix = Custom model OEG Catalog 1308242 5. Coil Input/Contact Rating: L = Sensitive (200mW) Coil, 3A Contacts**9. Suffix: D = Standard (450mW) Coil, 5A Contacts 06 = 6VDC 12 = 12VDC * Not suitable for immersion cleaning processes.48 = 48VDC Issued 3-03 (PDF Rev. 11-04) OEG L = Sensitive (200mW) Coil, 3A Contacts** ,000 = Standard model for enclosure codeSD = Standard (450mW) Coil, 5A Contacts ,095 = Standard model for enclosure codeSCatalog 1308242Other Suffix = Custom model * Not suitable for immersion cleaning processes. H = Standard (450mW) Coil, 10A Contacts** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. Ordering Information 5. Coil Input/Contact Rating: Issued 3-03 (PDF Rev. 11-04) OEG H = Standard (450mW) Coil, 10A Contacts** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. Ordering Information L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts * Not suitable for immersion cleaning processes. 6. Contact Arrangement: Typical Part Number B OJE -SH -1 12 L M H F ,095 6. Contact Arrangement: H = Standard (450mW) Coil, 10A Contacts** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. Ordering Information M = 1 Form A, SPST-NO Our authorized distributors are more likely to stock the following items for immediate delivery.Typical Part Number B OJE -SH -1 12 L M H F ,095 M = 1 Form A, SPST-NO 1. Basic Series: Our authorized distributors are more likely to stock the following items for immediate delivery. 6. Contact Arrangement: OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,0951. Basic Series: OJE-SH-112HM,095 Typical Part Number B OJE -SH -1 12 L M H F ,095 7. High Capacity Contact Rating Option for Sensitive Coil: OJ = 4kV dielectric, coil and contacts. OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095 7. High Capacity Contact Rating Option for Sensitive Coil:M = 1 Form A, SPST-NO Our authorized distributors are more likely to stock the following items for immediate delivery. OJ = 4kV dielectric, coil and contacts. OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 H = 8A Contacts (Only available with Coil Input/Contact Rating code). OJE = 3kV dielectric, coil and contacts. 1. Basic Series: OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 H = 8A Contacts (Only available with Coil Input/Contact Rating code). OJE = 3kV dielectric, coil and contacts. OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 7. High Capacity Contact Rating Option for Sensitive Coil:OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ = 4kV dielectric, coil and contacts. 2. Enclosure: OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 8. Insulation System: OJ-SH-112LMH,095 OJE-SH-112DM,0952. Enclosure: OJE-SH-105LMH,095 H = 8A Contacts (Only available with Coil Input/Contact Rating code). OJE = 3kV dielectric, coil and contacts. 8. Insulation System: SS = Vented (Flux-tight)*, plastic cover. Leave Blank = Class A (105C) F = Class F (155C) OJE-SH-124DM,095SS = Vented (Flux-tight)*, plastic cover.OJE-SH-112LMH,095 OJ-SH-124LMH,095 2. Enclosure: Leave Blank = Class A (105C) F = Class F (155C) SH = Sealed, plastic case. 8. Insulation System: Outline Dimensions Wiring Diagram (Bottom View) SH = Sealed, plastic case. Outline Dimensions Wiring Diagram (Bottom View) SS = Vented (Flux-tight)*, plastic cover. 9. Suffix: Leave Blank = Class A (105C) F = Class F (155C) 3. Termination: 9. Suffix: 3. Termination:SH = Sealed, plastic case. Wiring Diagram (Bottom View) Outline Dimensions ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS Other Suffix = Custom model 1 = 1 pole ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS1 = 1 pole Other Suffix = Custom model 9. Suffix: 3. Termination: General Purpose Relays General Purpose Relays 4. Coil Voltage: ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS Other Suffix = Custom model 4. Coil Voltage:1 = 1 pole * Not suitable for immersion cleaning processes. General Purpose Relays * Not suitable for immersion cleaning processes. General Purpose Relays 05 = 5VDC 09 = 9VDC 24 = 24VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC PCB Relays .58 .02 4. Coil Voltage: OEG PCB Relays .58 .02 OEG ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. 06 = 6VDC 12 = 12VDC 48 = 48VDC ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Orderi* Not suitable for immersion cleaning processes. ng Information. 06 = 6VDC 12 = 12VDC 48 = 48VDC (14.7 .5) PCB Relays (14.7 .5)05 = 5VDC 09 = 9VDC 24 = 24VDC OEG PCB Relays .58 .02 OEG ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Ordering Information. 06 = 6VDC5. Coil Input/Contact Rating:12 = 12VDC 48 = 48VDC 5. Coil Input/Contact Rating: (14.7 .5) L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts 5. Coil Input/Contact Rating: Our authorized distributors are more likely to stock the following items for immediate delivery.Our authorized distributors are more likely to stock the following items for immediate delivery. H = Standard (450mW) Coil, 10A ContactsH = Standard (450mW) Coil, 10A Contacts Miniature PCB Relay OJ/OJE Miniature PCB Relay OJ/OJE L = Sensitive (200mW) Coil, 3A Contacts**(Continued)(Continued) D = Standard (450mW) Coil, 5A Contacts Our authorized distributors are more likely to stock the following items for immediate delivery.Miniature PCB Relay OJ/OJE (Continued) OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095H = Standard (450mW) Coil, 10A Contacts OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095Miniature PCB Relay OJ/OJE (Continued) 6. Contact Arrangement:6. Contact Arrangement: OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 .157 .012 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 .157 .012 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 M = 1 Form A, SPST-NO6. Contact Arrangement: M = 1 Form A, SPST-NO (4.00 .3) OJE-SH-112DM,095 OJE-SH-105LMH,095 .157 (4.00 .012 .3) OJ-SH-112LMH,095 M = 1 Form A, SPST-NO OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,0957. High Capacity Contact Rating Option for Sensitive Coil: .012 .018 x .018 (4.00 7.High Capacity Contact Rating Option for Sensitive Coil: .3) .012 .018 x .018 OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 (.3) 7. High Capacity Contact Rating Option for Sensitive Coil: Insulation Data (.45 x .45) .012 Terminal assignmentH = 8A Contacts (Only available with Coil Input/Contact Rating code)..039 .039 PCB layout Insulation Data .018 x .018 (.3) .012 Terminal assignment PCB layout Insulation Data (.45 x .45) Terminal assignmentH = 8A Contacts (Only available with Coil Input/Contact Rating code)..039 PCB layout .012 .039 PC Board Layout (Bottom View) PC Board Layout (Bottom View) (.3) H = 8A Contacts (Only available with Coil Input/Contact Rating code).(1.0) (1.0) Insulation Data (.45 x .45) (.3) .012Terminal assignment.039 .039 PCB layout Initial dielectric strInitial dielectric strength ength Bottom view on solder pinsBottom view on solder pins(.3) (1.0) (1.0)Bottom view on solder pinsBottom view on solder pins 8. Insulation System: PC Board Layout (Bottom View) Outline Dimensions Wiring Diagram (Bottom View) Bottom view on solder pins Initial dielectric strength Bottom view on solder pins 8. Insulation System: Outline Dimensions (.3) Wiring Diagram (Bottom View)(1.0) (1.0) Initial dielectric strength Bottom view on solder pins Bottom view on solder pins 8. Insulation System: between open contacts 750V Wiring Diagram (Bottom View) Outline Dimensionsbetween open contacts 750V Leave Blank = Class A (105C) F = Class F (155C) rms rms 4 .05 DIA between open contacts 750V Leave Blank = Class A (105C) F = Class F (155C) rms 4 .05 DIA between open contacts 750V Leave Blank = Class A (105C) F = Class F (155C) between contact and coil OJ: 4000Vrms between contact and coil OJ: 4000V (1.3)4 .05 DIA.067 rms rms 9. Suffix: .401 .02 between contact and coil OJ: 4000V (1.3) .067 rms 9. Suffix: between contact and coil OJ: 4000V .401 .02 (1.3)(1.71).067 rms OJE: 3000V 9. Suffix: OJE: 3000V rms ,000 = Standard model for enclosure codeS(10.2 .401 .5) .02 ,095 = Standard model for enclosure codeS Other Suffix = Custom model rms (1.71) (10.2 .5) (1.71) OJE: 3000V ,000 = Standard model for enclosure codeS ,095 = Standard model for enclosure codeS Other Suffix = Custom model rms OJE: 3000V .300 .008,000 = Standard model for enclosure codeS(10.2 .5) ,095 = Standard model for enclosure codeS Other Suffix = Custom model Clearance/creepage rms Clearance/creepage .300 .008 .300 .008 (7.62 .2) Clearance/creepage * Not suitable for immersion cleaning processes. Clearance/creepage between contact and coil .58 .02 OJ: > 7.7mm / 9.4mm (7.62 (7.62 .2) .2) between contact and coil OJ: > 7.7mm / 9.4mm * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes58 .02 .58 .02 ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Orderi.300 .004 ng Information. (14.7 .5) between contact and coil OJ: > 7.7mm / 9.4mm between contact and coil between contact and coil OJ: > 7.7mm / 9.4mmOJE: > 3.2mm / 3.6mm ** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Orderi** For higher contact rating with sensitve coil, add suffix to the end of the part number as indicated in step 7 of Orderi.300 .004.300 .004 ng Information. ng Information. between contact and coil OJE: > 3.2mm / 3.6mm(14.7 (14.7 .5) .5) (7.6 .1) between contact and coilTracking index of relay base OJE: > 3.2mm / 3.6mmPTI 250 between contact and coil OJE: > 3.2mm / 3.6mm (7.6 .1) (7.6 .1) Tracking index of relay base PTI 250 .067 Our authorized distributors are more likely to stock the following items for immediate delivery..067 Tracking index of relay base PTI 250 Tracking index of relay base PTI 250 (1.71) .067 Our authorized distributors are more likely to stock the following items for immediate delivery500 .008 (1.71)Our authorized distributors are more likely to stock the following items for immediate delivery. (1.71) OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 .500 .008 (12.70 .500 .2) .008 .100 .004OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 .500 .004 Other Data (12.70 .2) OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-112LMH,095.1 .008 OJE-SH-112DM,095 OJE-SH-105LMH,095 .100 .004 (12.70 .2) .500 .004 (2.54 .1) .100 .004 .1 .008 OJ-SH-112LMH,095 OJE-SH-112DM,095 (12.7 OJE-SH-105LMH,095 .1) Other Data .500 .004 .716 .02 (2.54 .2).1 .008 (2.54 .1) Material compliance: EU RoHS/EL.157 V, China RoHS, REACH, Halogen content .012 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095(12.7 .1) Other Data .716 .02 (2.54 .2) (2.54 .1) .157 .012 OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095(12.7 .1) Other Data (18.2 .5) (4.00 .3) .716 .02 (2.54 .2) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content.157 .012 refer to the Product Compliance Support Center at DimensionsOJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 (18.2 .5) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content(4.00 .3) .012 .018 x .018 (18.2 .5) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content(4.00 .3) refer to the Product Compliance Support Center at Dimensions .012 www.te.com/customersupport/rohssupportcenter .018 x .018 Outline Dimensions Wiring Diagram (Bottom View) (.3) refer to the Product Compliance Support Center at Dimensions (.45 x .45) .012 .012 .039 .039 Outline Dimensions Wiring Diagram (Bottom View) .018 x .018 (.3) (.45 x .45) Reference Data.012 .039 .039 PC Board Layout (Bottom View) Ambient temperaturwwwer efer to the Pr.te.com/customersupport/roduct Compliance Support Center at ohssupportcenter Dimensions Reference Data Outline Dimensions Wiring Diagram (Bottom View) www.te.com/customersupport/r(1.0) ohssupportcenter(1.0) PC Board Layout (Bottom View) (.3) (.3) (.45 x .45) .039 .039 .012 (1.0) (1.0) (.3) Reference Data DM: -30C to +85C PC Board Layout (Bottom View) Ambient temperature www.te.com/customersupport/r ohssupportcenter Ambient temperature Coil Temperature Rise(.3) (1.0) (1.0) Operate Time Life Expectancy Coil Temperature Rise Operate Time Life Expectancy HM: -30C to +70C 4 .05 DIA DM:Ambient temperatur e -30C to +85C 4 .05 DIA DM: -30C to +85C 100 Coil Temperature Rise 12 Operate Time Life Expectancy 60 100 (1.3) .06712 HM2: 60 -30C to +85C (1.3) .401 .02 4 .05 DIA.067 .58 .02 HM: -30C to +70C DM: -30C to +85C .58 .02 HM: -3.401 0C t .02o +70C HM type, 120VAC Res. 100 (1.71) 12 HM type, 120VAC Res. 60 (14.7 .5) LM -30C to +90C (1.71) (10.2 .5) (1.3) .067 (14.7 .5) HM2: -30C to +85C(10.2 .5) HM: HM2: -30C to +85C-3.401 0C t .02o +70 C .58 .02 10 HM type, 120VAC Res300 50 .008 LMH: .300 .008 -30C to +70C 10 (1.71) 50 (14.7 .5) LM -30C to +90C(10.2 .5) HM2: LM (7.62 .2) -30C to +90C-30C to +85C LMH type, 250VAC Res. (7.62 .2) LMH type, 250VAC Res. LMH2: -30C to +85C 10 .300 50 .008 LMH: -30C to +70C LMH: -30C to +70C 8 .300 .004 LM 40 -30C to +90C 8 Category of environmental protection(7.62 40 .2) .300 .004 LMH type, 250VAC Res. LMH2: -30C to +85C (7.6 .1) LMH2: -30C to +85C (7.6 .1) LMH: IEC 61810 -30C to +70CRTII - flux proof 8 .157 .012 40 .300 .157 .004 .012 .067 Category of envirCategory of environmental pronmental protectionotection .067 (4.00 .3) 10 30 6 (4.00 .3) 10 LMH2: 30 -30C to +85CRTIII - wash tight 6 (7.6 .1) (1.71) (1.71) .012 .012 .018 x .018.018 x .018 IEC 61810 RTII - dust protected OperOperate Timeate Time.157 .012 IEC 61810 RTII - dust protected .500 .008 Shock resistance (functional).500 .008 10g .067 (.3) (.3) Category of environmental protection (.45 x .45)(.45 x .45) .039 .039.039 .012.012 (4.00 .3).039 30 10 6 PC Board Layout (Bottom View)PC Board Layout (Bottom View) (12.70 (12.70 .2) .2) RTIII - wash tightRTIII - wash tight .100 .100 .004 .004 (1.0)(1.0) Shock resistance (destructive) (1.71) 100g (.3) (.3) (1.0)(1.0) 20 20 .500 .500 4 .004 4 .004 .012 .1 .008 .018 x .018 Operate Time IEC 61810 .1 .008 RTII - dust protected .500 .008 (2.54 (2.54 .1) .1) (.3) Shock rShock resistance (functional)esistance (functional) 10g 10g (.45 x .45)(12.7 .1) .039 .039 Weight 9g (12.7 .1) .012 .716 .02 (2.54 (2.54 .2) .2) .716 .02 LM type, 250VPC Board Layout (Bottom View)AC Res. LM type,4 .05 DIA 250V4 .05 DIAAC Res. (12.70 .2) RTIII - wash tight .100 .004 (.3) (1.0) (1.0) 20 .500 .004 Shock resistance (destructive)(18.2 .5) 100g 4 Shock resistance (destructive)Resistance to soldering heat THT(18.2 .5) .1 .008100g (1.3) .067 (1.3) .067 10 2 2 10 .401 .401 .02 .02 (2.54 .1) Shock resistance (functional) 10g (12.7 .1) (1.71) (1.71) .716 .02 (2.54 .2) Weight IEC 60068-2-20 RTII: 270C/10s9g (10.2 .5) Weight 9g (10.2 .5) LM type,4 .05 DIA 250VAC Res. DM type, 250VAC Res. DM type, 250VAC Res300 .008Release Time .300 .008Release Time Shock resistance (destructive)(18.2 .5) 100g (1.3) .067 Resistance to soldering heat THT RTIII: 260C/5s Resistance to soldering heat THTReference Data 2 1 10 (7.62 .2) .401 .02 1 Reference Data (7.62 .2) (1.71) Weight 9g (10.2 .5) IEC 60068-2-20Packaging unit tray/100, carton box/1000RTII: 270C/10s0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 .300 .004 IEC 60068-2-20 RTII: 270C/10s0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 .300 DM type, .004 250VAC Res300 .008Release Time Coil Temperature Rise Operate Time Life Expectancy (7.6 .1) Coil Temperature Rise Operate Time Life Expectancy (7.6 .1) Resistance to soldering heat THT RTIII: 260C/5s Reference Data 1 RTIII: 260C/5s Coil Power (W) (7.62 .2) Contact Current (A) Coil Power (W) Coil Power (W) Contact Current (A) Coil Power.067 (W) 10.0670 12 60Packaging unit tray/100, carton box/10000.1 0.2 0.3 0.4 0.5 0.6 0.7 010.10 0.2 0.3 0.4 0.5 0.6 0.7 IEC 60068-2-20 RTII: 270C/10s12 Test relay: OJE-SH-112LMH 0 1 2 3 45 6 7 8 9 10 60 (1.71) .300 .004 Packaging unit tray/100, carton box/1000 Test relay: OJE-SH-112LMH (1.71) .500 .008 Coil Temperature Rise Operate Time Life ExpectancyHM type, 120VAC Res500 .008 (7.6 .1) HM type, 120VAC Res. RTIII: 260C/5s (12.70 .2) .100 .004 Contact Current (A) Coil Power (W) (12.70 .2) Coil Power (W) .500 .004 .100 .004 .1 .008 .067 Dimensions are shown for Dimensions are in inches over Specifications and availability .500 .004 www.tycoelectronics.com .1 .008100 (2.54 .1) 50 10 Dimensions are shown for 12 Dimensions are in inches over Specifications and availability (12.7 .1) www.tycoelectronics.com 60 10 (2.54 .1) 50 Packaging unit tray/100, carton box/1000 .716 Test r .02 elay: OJE-SH-1(2.54 .2)12LMH (1.71) (12.7 .1) reference purposes only. (millimeters) unless otherwise.716 .02 (2.54 .2) subject to change. Technical support: LMH type, 250VAC Res. 423 .500 .008 reference purposes only. (millimeters) unless otherwise(18.2 .5) subject to change. Technical support: HM type, 120VAC Res. 423 LMH type, 250VAC Res. (18.2 .5) specified. Refer to inside back cover. (12.70 .2) specified. Refer to inside back cover..100 .004 8 .500 .004 40 .1 .008 Dimensions are shown for 8 Dimensions are in inches over Specifications and availability www.tycoelectronics.com 40 10 (2.54 .1) 50 (12.7 .1) Reference Data .716 .02 (2.54 .2) reference purposes only. Reference Data(millimeters) unless otherwise subject to change. Technical support: LMH type, 250VAC Res. 423 (18.2 .5) Coil Temperature Risespecified. Operate Time Life Expectancy Refer to inside back cover. 10 30 6 8 Coil Temperature Rise 10 Operate Time Life Expectancy 30 40 6 Operate Time 100 12 60 Operate Time 100 Reference Data 12 60 HM type, 120VAC Res. HM type, 120VAC Res. 20 4 Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000 10 20 4 Coil Temperature Rise50 10 Operate Time Life Expectancy 30 6 10 50 LM type, 250VAC Res. LMH type, 250VAC Res. Operate Time 100 12 60 LM type, 250VAC Res. LMH type, 250VAC Res. 2 10 40 8 Type HM type, 120VAC Res. 2 8 10 40 Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000 20 4 OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts DM type, 250VAC Res. Product code structure Typical product code Release TimeOJ -SH -1 12 LMH F 10-WG ,000 50 DM type, 250VAC Res. 10 30 6 1 OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contactsRelease Time LM type, 250VAC Res. LMH type, 250VAC Res. 10 30 6 Operate Time 1 Type 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 1 0 2 3 45 6 7 8 9 10 Category of protection 2 Operate Time 10 40 8 0.2 0.2 Type 0.1 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 20 4 OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000 SS Fux proof Coil Power (W) Contact Current (A) Coil Pow20er (W) 4 DM type, 250VAC Res. OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts LM type, 250VAC Res. Release Time OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts Coil Power (W) Contact Current (A) SH Wash tight Test relay: OJE-SH-1Coil Power12LMH (W) 10 30 6 1 2 LM type, 250VAC Res. 10 OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts Test relay: OJE-SH-112LMH Category of protection Operate Time Number of poles 2 0.2 0.2 10 Type 0.1 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 DM type, 250VAC Res. Release Time Category of protection Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com SS 1 Fux pr1 poleoof 1 20 4 DM type, 250VAC Res. OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts Release Time Dimensions are shown forreference purposes only. SS Fux proof Dimensions are in inches over(millimeters) unless otherwise Specifications and availability0.1subject to change.0.2 0.3 0.4 0.5 0.6 0.7 Contact Curr0.1 0.2www.tycoelectronics.comTechnical support:0.3 ent 0.4(A) 0.5 0.6 0.7 Coil Power (W) Coil Power (W) 1 0 1 2 3 45 6 7 8 9 10 SH Wash tight 423 Coil voltage LM type, 250VAC Res. OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts reference purposes only. (millimeters) unless otherwisespecified. 0.1subject to change.0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 Technical support:0.3Refer to inside back cover.0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 SH Wash tight Test relay: OJE-SH-112LMH 423 Coil Power (W) Contact Current (A) Number of poles Coil code: please refer to coil versions table (e.g. 12 = 12VDC) Coil Power (W) 2 10 specified. Refer to inside back cover. Category of protection Test relay: OJE-SH-112LMH Contact Current (A) Coil Power (W) Coil Power (W) Number of poles Contact rating and coil power1 1 pole DM type, 250VAC Res. Release Time Test relay: OJE-SH-112LMH Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com SS Fux proof 1 1 pole 1 450 mWcoil power 200mW coil power Coil voltage Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise 0.1subject to change.0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 Technical support:0.3 0.4 0.5 0.6 0.7 0 1 2 8 3 45 6 7 9 10 SH Wash tight reference purposes only. (millimeters) unless otherwise subject to change. 423 Technical support: DM 5A type, coil power 450mW LM 3A type, coil power 200mW 423 Coil voltage Coil code: please refer to coil versions table (e.g. 12 = 12VDC) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com specified. Refer to inside back cover. specified. Refer to inside back cover. reference purposes only. (millimeters) unless otherwise subject to change. Technical support: TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mW Coil Power (W) Coil Power (W) Contact Current (A) Number of poles Coil code: please refer to coil versions table (e.g. 12 = 12VDC) 423 Contact rating and coil power specified. Refer to inside back cover. Test relay: OJE-SH-112LMH HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW 1 1 pole Contact rating and coil power 450 mWcoil power 200mW coil power HM2 10A type, coil power 450mW DM 5A type, coil power 450mW LM 3A type, coil power 200mW Coil voltage 450 mWcoil power 200mW coil power Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com Insulation system designation TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mWreference purposes only. (millimeters) unless otherwise subject to change. Technical support: DM 5A type, coil power 450mW LM 3A type, coil power 200mW Coil code: please refer to coil versions table (e.g. 12 = 12VDC) 423 Blank Insulation Class E (standard) F Insulation Class F specified. Refer to inside back cover. HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mW Contact rating and coil power Special type HM2 10A type, coil power 450mW HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW 450 mWcoil power 200mW coil power Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition) Insulation system designation HM2 10A type, coil power 450mW DM 5A type, coil power 450mW LM 3A type, coil power 200mW Suffix Blank Insulation Class E (standard) F Insulation Class F Insulation system designation TM ,000TV -5 type, coil power 450mWStandard LMH 8A type, coil power 200mW Special type Blank Insulation Class E (standard) F Insulation Class F HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition) Special type HM2 10A type, coil power 450mW Suffix Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition) Insulation system designation ,000 Standard Suffix Blank Insulation Class E (standard) F Insulation Class F ,000 Standard Special type 2 Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition) 01-2014, Rev. 0114 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- Suffix www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. ,000 Standard a TE Connectivity Ltd. company