Automotive, General Purpose and Signal Relays Definitions Definitions General . page 2 Definitions . page 3 Handling, Processing, Testing and Use Handling/Logistics page 16 Processing . page 16 Testing page 18 Use . page 19 1 05-2018, Rev. 0518 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2018 TE Connectivity. only together with the Definitions section. the Definitions section, available at are subject to change. Automotive, General Purpose and Signal Relays Definitions (Continued) General TE CONNECTIVITY WILL IN NO CASE BE LIABLE IN ANY CIRCUM- While TE Connectivity and its affiliates have made every reasonable effort to STANCES FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL confirm the accuracy of the information contained in datasheets and cata - DAMAGES OR LOSS OF PROFITS ARISING FROM OR IN CONNEC- logs, TE Connectivity cannot assure that this information is error free For . TION WITH THE INFORMATION CONTAINED IN ITS DATASHEETS AND this reason TE Connectivity does not make any representation or offer any CATALOGS OR IN CONNECTION WITH ITS PRODUCTS, INCLUDING, guarantee that such information is accurate, correct, reliable or current or BUT NOT LIMITED TO, THE SALE, RESALE, USE OR MISUSE OF ITS does not infringe any intellectual property rights TE Connectivity r . eserves PRODUCTS. USERS SHOULD RELY ON THEIR OWN JUDGMENT TO the right to make any adjustments to the information at any time . EVALUATE THE SUITABILITY OF A PRODUCT FOR A CERTAIN PUR- TE Connectivity expressly disclaims any implied warranty regarding POSE AND TEST EACH PRODUCT FOR ITS INTENDED APPLICATION. the information contained in the datasheets and catalogs, including, but not limited to, the implied warranties of merchantability or fitness TE Connectivity strongly recommends to monitor the life cycle of the product for a particular purpose. TE Connectivitys only obligations and liability and to verify the relevant failure mode per IEC 61810-1 . with respect to its products are governed solely by the TE Connecti- vitys Standard Terms and Conditions of Sale for these products or the respective written agreement under which the products are supplied. Technical data Specification Unless otherwise stated, the stated technical data are based on laboratory In order to improve performance and quality, we continuously develop our tests under standardized conditions and are within the conditions of normal products W . e reserve the right to change technical parameters and product use for these components . The vast number of influencing factors does not specifications The technical data listed ar . e for description purposes of the allow TE to test its products for all imaginable applications and processes . components only and are not an agreement and do not guarantee specific Furthermore, the large number of possible variations within a relay family characteristics and parameters for detailed questions, please contact our makes it impossible to give a comprehensive description of the different application support . Drawings, photos data and descriptions are subject to characteristics for all variants in one datasheet . Typical data are derived from change without prior notice . the standard versions . The decision on the suitability of a specific component is solely responsibility Availability The databooks and datasheets list a broad range of products and the of the user . To ensure the suitability of the product for a specific application descriptive part code structure (product code) does allow a large number the user has to test these products before the use under the most stringent conditions they will be exposed to in the actual application T . aking into of possible variations, but not all possible variations are defined as standard consideration the aspects of operational availability and safety, the user has types in the current product portfolio (product code) and thus may not be to rate the actual service life in an adequate relation to the expected life of included in the product range Some pr . oducts are normally maintained in stock for immediate delivery, or are available within normal leadtimes for the relay . The use of the relay beyond its specified characteristics or beyond suf - industry however, there may be extended leadtimes for some non-stock ficiently tested life expectancy bears the risk of dangerous conditions the items Special versions to customer specifications may be supplied user has to prevent such conditions by adequate measures, being entirely Additionally, minimum quantity requirements apply and these requirements may differ from indicated packaging units . Please consult with your TE sales responsible in case of non-observance . organization or authorized distributor regarding availability and minimum All product data are intended for users with knowledge and experience in order requirements . the application of such specifications The utilization is at the entir . e risk of Right to change the availability and delivery conditions reserved . the user . Definitions , datasheets, product data, application notes and all specifica - The user has to verify the accordance with existing regulations and relevant standards for the application in particular with reference to the insulation tions are subject to change . requirements as function of applied voltages and ambient conditions . Trademark The standards (e .g . IEC 61810 Electrical endurance ) are based on the TE Connectivity, TE connectivity (logo), TE (logo), TE Tyco Electronics (logo), principal assumption of occurences of malfunctions such as malfunction AXICOM, OEG, P&B, Potter & Brumfield, PRODUCTS UNLIMITED and to make contact, malfunction to break or as insufficient dielectric strength . SCHRACK are trademarks . Such malfunctions have to be taken into consideration and must not ge- nerate risks Depending on the specific load, its characteristics and power . in the contact set, a relay malfunction situation may generate various risks such as malfunction of the equipment and its controls, electrical shock, the risk of excessive heat and fire and others It is in the entir . e responsibility of the user to provide for additional precautions against such possible effects according to the relevant application standards . Protection against risks under all operation conditions even in case of malfunction can only be ensured by the design of the equipment as well as by application instructions for the end user it is the responsibility of the manufacturer of the equipment to take the appropriate measures . Incorrect connections by the user may lead to risks, faulty operation and abnormal heating or fire . It is also the responsibility of the manufacturer of the equip - ment to take appropriate measures to avoid potential danger of electrical shock by preventing access to live parts of the relay including parts as terminals and accessories . 2 05-2018, Rev. 0518 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2018 TE Connectivity. only together with the Definitions section. the Definitions section, available at are subject to change.