PCE-112D1H,000 TE Connectivity

Catalog 1308242 Catalog 1308242 Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) OEG Issued 3-03 (PDF Rev. 3-04) OEG OEG Issued 3-03 (PDF Rev. 3-04) General Purpose Relays PCB Relays OEG Miniature PCB Relay PCE Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) OEG n 10A contact rating n 1 Form A ( 1 NO) or 1 Form C ( 1 CO) contact optional n Class F insulation system standard PCE series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines Typical applications Appliances, HVAC, office machines UL File No. E82292 CSA File No. LR48471 UV VDE File No. 6175 Approvals Coil Data Users should thoroughly review the technical data before selecting a product part UL E58304, VDE 40011077, CQC 08001027389 Coil voltage range 3 to 48VDC number. It is recommended that user also seek out the pertinent approvals files of Technical data of approved types on request Operative range, IEC 61810 2 the agencies/laboratories and review them to ensure the product meets the Coil insulation system according UL Class E, F requirements for a given application. Contact Data Contact arrangement 1 Form A (NO), 1 Form C (CO) Coil versions, DC coil Features Coil Data Rated voltage 28VDC, 240VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 28VDC, 240VAC code voltage voltage voltage resistance power Small, low profile package, 10 Amp switching capacity. Voltage: 6 to 48VDC. Rated current 10A VDC VDC VDC 10 % mW 1 Form A and 1 Form C contact arrangements. Nominal Power: 360 mW Contact material AgCdO, AgSnO 03 3 2.25 0.15 25 360 Min. recommended contact load 100mA, 5VDC 05 5 3.75 0.25 69.4 360 UL Class F (155C) insulation system standard Coil Temperature Rise: 35C max., at rated coil voltage. Frequency of operation 360 ops./h 06 6 4.5 0.3 100 360 Immersion cleanable, sealed version available. Max. Coil Power: 130% of nominal. Operate/release time max. 10ms/5ms 09 9 6.75 0.45 225 360 Applications include appliance, HVAC, security system, garage opener Duty Cycle: Continuous. Electrical endurance 12 12 9.0 0.6 400 360 3 form A (NO) 10A, 240VAC, +85C 30x10control, emergency lighting. ops. 18 18 13.5 0.9 900 360 Coil Data @ 20C 3 form B (NC) 6A, 240VAC,+85C 25x10 ops. 24 24 18.0 1.2 1600 360 6 Mechanical endurance, DC coil 10x10 operations 36 36 27.0 1.8 3600 360 PCE 48 48 36.0 2.4 6400 360 Contact Data @ 20C All figures are given for coil without pre-energization, at ambient temperature +23C Rated Coil Nominal Coil Must Operate Must Release Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Voltage Current Resistance Voltage Voltage Insulation Data Material: Ag Alloy, AgSnO. (VDC) (mA) (ohms) 10% (VDC) (VDC) Initial dielectric strength Max. Switching Rate: 300 ops./min. (no load). between open contacts 750V rms 30 ops./min. (rated load). between contact and coil 2000V rms 6 60 100 4.50 0.30 Expected Mechanical Life: 10 million operations (no load). Clearance/creepage 9 40 225 6.75 0.45 between contact and coil >1.6mm/>3.2mm Expected Electrical Life: 100,000 operations (rated load). 12 30 400 9.00 0.60 Minimum Load: 100mA @ 5VDC. 24 15 1,600 18.00 1.20 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 48 7 6,400 36.00 2.40 Reference Data Reference Data Reference Data Contact Ratings Electrical enduranceCoil Temperature Rise Operate timeOperate Time Coil operative rangeLife Expectancy Coil Temperature Rise Operate Time Life Expectancy Coil Temperature Rise Operate Time Life Expectancy 180 180 100 100 12 180 12 12 100 Ratings: 10A @ 250VAC resistive, Operate Data 160 160 160 10A @ 120VAC resistive, 28VDC Resistive 28VDC ResistiMaximum ve Maximum 28VDC Resistive 10 Maximum 10 10 Must Operate Voltage: 75% of nominal voltage or less. Allowable Allowable 140 Operating 140 Operating 140 Operating Allowable Operate Time Operate Time 10A @ 28VDC resistive. Operate Time Coil Voltage Coil Voltage Votage Range Votage Range Votage Range Coil Voltage Must Release Voltage: 5% of nominal voltage or more. 8 8 120 8 120 120 Operate Time: 10 ms max. 100 100 100 3A @ 250VAC inductive (cos= 0.4), 10 10 6 6 6 Release Time: 5 ms max. 10 240VAC Resistive 240VAC Resistive 240VAC Resistive 80 80 80 3A @ 120VAC inductive (cos= 0.4), Cool Coil Cool Coil Cool Coil 60 60 60 4 4 3A @ 28VDC inductive (L/R=7msec). 4 Hot Coil 10A Applied Hot Coil 10A Applied Hot Coil 10A Applied Environmental Data 40 40 40 Pick-Up Voltage Pick-Up Voltage Pick-Up Voltage 2 2 2 20 20 Release Time 20 Release Time Temperature Range:Release Time Max. Switched Voltage: AC: 250V. 1 1 0 0 0 Operating: -30C to +70C1 DC: 28V. 6 8 10 -30 -10 10 306 50 70 8 90 11010130 150 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 2 4 12 -30 -10 10 30 50 70 90 110 130 150 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 2 4 12 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 2 4 6 8 10 12 -30 -10 10 30 50 70 90 110 130 150 Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Max. Switched Current: 10A. Ambient Temp. ( C) Coil Power (W) Contact Current (A) Ambient Temp. ( C) Coil Power (W) Contact Current (A) Ambient Temp. ( C) Coil Power (W) Contact Current (A) Operational: 10 to 55 Hz., 1.5mm double amplitude. Max. Switched Power: 2,500VA, 280W. Note: This data is based on the max. allowable Note: This data is based on the max. allowable Note: This data is based on the max. allowable 2 Shock, Mechanical: 1,000m/s (100G approximately). temperature for E type insulation coil (115 C). temperature for E type insulation coil (115 C). temperature for E type insulation coil (115 C). 2 Operational: 100m/s (10G approximately). www.tycoelectronics.com Dimensions are shown for www.tycoelectronics.comDimensions are in inches over Specications and availability Dimensions are shown for Dimensions are in inches over Specications and availability Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com Initial Dielectric Strength Technical support: reference purposes only. (millimeters) unless otherwise subject to change. reference purposes only. Technical support: (millimeters) unless otherwise subject to change. Operating Humidity: 20 to 85% RH. (Non-condensing). 436 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 436 436 Refer to inside back cover. Refer to inside back cover.specied. specied. specied. Refer to inside back cover. Between Open Contacts: 750VAC 50/60 Hz. (1 minute). 1 Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - Mechanical Data www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications Surge Voltage Between Coil and Contacts: 4,000V (1.2 / 50s). 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. Termination: Printed circuit terminals. a TE Connectivity Ltd. company Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) OEG Ordering Information Typical Part Number B PCE -1 24 D 1 M ,000 1. Basic Series: PCE = Miniature Power PC board relay. 2. Termination: Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) OEG 1 = 1 pole 3. Coil Voltage: Ordering Information 06 = 6VDC 12 = 12VDC 48 = 48VDC Typical Part Number B PCE -1 24 D 1 M ,000 09 = 9VDC 24 = 24VDC 1. Basic Series: 4. Coil Input: PCE = Miniature Power PC board relay. D = Standard 2. Termination: 5. Contact Material: 1 = 1 pole General Purpose Relays 1 = AgCdO 2 = AgSnO 3. Coil Voltage: 06 = 6VDC 12 = 12VDC 48 = 48VDC PCB Relays OEG 6. Contact Arrangement: 09 = 9VDC 24 = 24VDC Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO Catalog 1308242 4. Coil Input: Issued 3-03 (PDF Rev. 3-04) OEG 7. Enclosure: D = Standard Blank = Flux-tight plastic case. H = Sealed plastic case with knock-off nib for ventilatioMiniature PCB Relay PCE n (Continued) 5. Contact Material: Ordering Information 1 = AgCdO 2 = AgSnO 8. Suffix: Typical Part Number B PCE -1 24 D 1 M ,000 ,000 = Standard model Other Suffix = Custom model 6. Contact Arrangement: 1. Basic Series: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO PCE = Miniature Power PC board relay. Other Data Accessories 7. Enclosure: 2. Termination: Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Product Code Description Blank = Flux-tight plastic case. H = Sealed plastic case with knock-off nib for ventilation Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. 1 = 1 pole refer to the Product Compliance Support Center at 27E1064 Socket, rated 10A at 300VAC. UL Recognized for US 8. Suffix: 3. Coil Voltage: PCE-112D1MH,000 PCE-112D1H,000 www.te.com/customersupport/rohssupportcenter and Canada. Designed to fit same suggested board ,000 = Standard model Other Suffix = Custom model 06 = 6VDC 12 = 12VDC 48 = 48VDC PCE-124D1H,000 PCE-124D1MH,000 Ambient temperature Class F type: -40 to +85C layout as relay. 09 = 9VDC 24 = 24VDC Class B type: -40 to +80C 4. Coil Input: Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. Category of environmental protection Outline Dimensions Wiring Diagram (Bottom View) D = Standard PCE-112D1H,000 PCE-112D1MH,000 IEC 61810 RTII - flux proof 5. Contact Material: PCE-124D1MH,000 PCE-124D1H,000 RTIII - wash tight 1 = AgCdO 2 = AgSnO Weight 11g 6. Contact Arrangement: Outline Dimensions Wiring Diagram (Bottom View) Resistance to soldering heat THT Dimensions Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO IEC 60068-2-20 RTII: 270C/10s 7. Enclosure: RTIII: 260C/5s Blank = Flux-tight plastic case. H = Sealed plastic case with knock-off nib for ventilation Packaging unit tube/25 pcs., carton box/1000 pcs. 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCE-112D1H,000 PCE-112D1MH,000 PCE-124D1H,000 PCE-124D1MH,000 Terminal assignment PCB layout PC Board Layout (Bottom View) Outline Dimensions Bottom view on solder pinsWiring Diagram (Bottom View) Bottom view on solder pins PC Board Layout (Bottom View) PC Board Layout (Bottom View) Socket Product code structure Typical product code PCE -1 12 D 1 M H ,000 Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. Type 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and PCE Miniature PCB Relay PCE Canada. Designed to fit same suggested board layout as relay. Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil input D Standard Contact material Socket 1 AgCdO 2 AgSnO Contact arrangement 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. M 1 Form A Enclosure Blank Flux proof plastic case H Sealed plastic case with knock-off nib for ventilation Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com Terminal construction reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 437 specied. Refer to inside back cover. ,000 Standard model Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 437 specied. Product code Poles Coil Cont. material Arrangement Refer to inside back cover.Enclosure Suffix Part number PCE-105D1H,000 1 pole 5VDC AgCdO 1 form C (CO) Sealed Standard 8-1419124-1 PCE-105D2H,000 AgSnO 1419146-9 PCE-112D1,000 12VDC AgCdO Flux proof 9-1419124-4 PCE-112D1H,000 Sealed 9-1419124-6 PCE-112D2H,000 AgSnO 1-1419146-3 PCE-112D2M,000 1 form A (NO) Flux proof 1419125-8 Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: PCE-124D1,000 24VDC AgCdO 1 form C (CO) 1-1419125-2 437 specied. Refer to inside back cover. PCE-124D1H,000 Sealed 1-1419125-4 PCE-124D1M,000 1 form A (NO) Flux proof 1-1419125-7 PCE-124D2,000 AgSnO 1 form C (CO) 1-1461394-2 PCE-148D1H,000 48VDC AgCdO Sealed 3-1419125-0 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company