General Purpose Relays Power Relays OEG Power PCB Relay PCFN Solar n 1 pole 26A, 1 form A (NO) contact n Contact gap >1.5mm n 200mW hold power n Ambient temperature up to 75C, 85C at 22A n The appliance is able to meet VDE V 0126-1-1 Typical applications Photovoltaic Inverter F PCFN B VZ Approvals Coil Data VDE REG.-Nr.A951, cULus E58304 Rated coil voltage 12VDC Technical data of approved types on request Coil insulation system according UL Class F Contact Data Coil versions, DC coil Contact arrangement 1 form A (NO) Coil Rated Operate Release Coil Rated coil Contact gap >1.5mm code voltage voltage voltage resistance power Rated voltage 277VAC VDC VDC VDC 10% mW 1) Rated current 26A 12 12 7,8 1,2 96 1.5 1) Ambient temperature > 23C requires reduction of coil voltage to 4.4 to <6V after 100ms. Breaking capacity max. 7200VA Hold voltage >=4.4V at ambient temperature 85C. Contact material AgSnO 2 -1 All figures are given for coil without pre-energization, at ambient temperature +23C. Frequency of operation, with/without load 6/300min Other coil voltages on request. Operate/release time max. 20/10ms Bounce time max., form A 3ms Insulation Data Contact ratings Initial dielectric strength Type Contact Load Cycles between open contacts 2500V rms IEC 61810 between contact and coil 4000V rms 3 PCFN-1..H2MG A (NO) 26A, 277VAC, cos=1, 75C 30x10 Clearance/creepage 3 PCFN-1..H2MG A (NO) 22A, 250VAC, cos=1, 85C 30x10 between contact and coil 6.1/6.1mm 3 PCFN-1..H2MG A (NO) 14A, 250VAC, cos=1, 85C 100x10 Material group of insulation parts III UL 508 Tracking index of relay base PTI 175 3 PCFN-1..H2MG A (NO) 26A, 277VAC, resistive, 75C 30x10 3 PCFN-1..H2MG A (NO) 22A, 277VAC, resistive, 85C 30x10 Other Data 6 Mechanical endurance, DC coil 1x10 operations Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.tycoelectronics.com/customersupport/rohssupportcenter 1) Ambient temperature -25 to +75C -25 to +85C at 22A Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional) 10g Vibration resistance (destructive) 10g Shock resistance (destructive) 100g Terminal type PCB-THT Mounting distance 10mm Weight 28g Resistance to soldering heat THT IEC 60068-2-20 260C/5s Packaging unit tube/20 pcs., box/500 pcs. 1) Ambient temperature > 23C requires reduction of coil voltage to 4.4 to <6V after 100ms. 1 09-2010, Rev. 0910 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, Definitions sec- cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications www.tycoelectronics.com together with the Definitions section. the Definitions section, available at are subject to change. 2010 Tyco Electronics Ltd. General Purpose Relays Power Relays OEG Power PCB Relay PCFN Solar (Continued) Dimensions PCB layout / terminal assignment Bottom view on solder pins S0547-AB S0548-A S0547-AA NOTE: it is recommended to connect the grid (phase or neutral line) to pin 11 of the PCFN Solar. Product code Version Contact arrangement Contact material Coil Part number PCFN-112H2MG PCB, flux tight 1 form A (NO) contact AgSnO 12VDC 1721929-1 2 2 09-2010, Rev. 0910 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, Definitions sec- cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications www.tycoelectronics.com together with the Definitions section. the Definitions section, available at are subject to change. 2010 Tyco Electronics Ltd.