PCN-112D3MHZ TE Connectivity

General Purpose Low Power PCB Relays OEG Slimline PCB Relay PCN n 1 pole 3 A, 1 form A (NO) contact n Only 5mm wide n 3A switching current, load range 1mA up to 5A n Sensitive coil 120mW n Allows high function-/packing density n Cadmium-free contacts n Z type with reinforced insulation n RoHS compliant (Directive 2002/95/EC) n Haz. Loc. Version available Typical applications Z PLC, temperature control, I/O modules. Approvals Coil Data Coil voltage range 3 to 24VDC VDE REG.-Nr.40001589, UL E82292, CQC 08001026045 Operative range, IEC 61810 1 Technical data of approved types on request. Coil insulation system according UL Class A Class F type available upon request Contact Data Standard D coil version (120mW), DC coil Contact arrangement 1 from A (NO) Coil Rated Operate Release Coil Rated coil Rated voltage 250VAC/30VDC code voltage voltage voltage resistance power Max. switching voltage 277VAC/125VDC VDC VDC VDC 10% mW Rated current 3A/5A 03 3 2.1 0.3 75 120 Limiting continuous current 3A/5A 04 4.5 3.15 0.45 169 120 Breaking capacity max. 750VA (3A), 1250VA(5A) 05 5 3.5 0.5 208 120 Contact material AgNi, gold plated 06 6 4.2 0.6 300 120 Contact style bifurcated contact 09 9 6.3 0.9 675 120 Min. recommended contact load (reference) 5VDC,100mA 12 12 8.4 1.2 1200 120 Initial contact resistance 30m at 100mA, 6VDC -1 18 18 12.6 1.8 2700 120 Frequency of operation, with/without load 10/300min 23 23.5 16.45 2.35 4602 120 Electrical endurance 3 24 24 16.8 2.4 4800 120 3A, 250VAC, resistive, +70C 100x10 ops. 3 Standard L coil version (100mW), DC coil 5A, 250VAC, resistive, +85C 30x10 ops. Coil Rated Operate Release Coil Rated coil Contact ratings code voltage voltage voltage resistance power Load Cycles VDC VDC VDC 10% mW IEC 61810 3 03 3 2.1 0.3 90 100 3A,250VAC, cos=1, +70C 100x10 3 04 4.5 3.15 0.45 202 100 3A/30VDC, L/R=0ms, +70C 100x10 3 05 5 3.5 0.5 250 100 5A, 250VAC, cos=1, +85C 30x10 3 06 6 4.2 0.6 360 100 5A 30VDC, L/R=0ms, +85C 70x10 09 9 6.3 0.9 810 100 UL 508 3 12 12 8.4 1.2 1440 100 3A, 250VAC, resistive, +25C 100x10 3 18 18 12.6 1.8 3240 100 Pilot duty, B300, +25C 6x10 3 23 23.5 16.45 2.35 5522 100 Pilot duty, R300, +25C 6x10 3 24 24 16.8 2.4 5760 100 9A LRA, 1.5A FLA, 240VAC, +45C 30x10 All figures are given for coil without pre-energization, at ambient temperature +23C. 6 Mechanical endurance, DC coil >10x10 operations 1 08-2020, Rev. 0820 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2013 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Low Power PCB Relays OEG Slimline PCB Relay PCN (Continued) Insulation Data Initial dielectric strength between open contacts 750V rms PCB layout / terminal assignment between contact and coil 3000V rms Bottom view on solder pins Initial surge withstand voltage between contact and coil 4000V Clearance/creepage between contact and coil >3.5mm Tracking index of relay base PTI600 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85C Category of environmental protection IEC 61810 RTIII - wash tight Vibration resistance (functional) 10 to 55Hz, 1.5mm Vibration resistance (destructive) 10 to 55Hz, 1.5mm Shock resistance (functional) 2 IEC 60068-2-27 (half sine) min. 98m/s , 11ms 2 Shock resistance (destructive) min. 980m/s , 6ms Terminal type PCB-THT Resistance to soldering heat THT IEC 60068-2-20 260C/5s Packaging/unit box/2000 pcs. Dimensions Product code structure Typical product code PCN 1 05 D 3 M H Z ,001 Type PCN Small Slim Power PCB Relay PCN Number of poles 1 1pole Coil Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil version D standard 120mW L high sensitivity 100mW Contact material 3 AgNi Contact arrangement M 1 form A, 1 NO contact Enclosure H RTIII - wash tight Insulation Z Reinforced insulation (tracking resistance of relay base, case PTI 600) Version 00000 3A model 00100 5A model -EX1 according to IEC60079-15 = 2010 Product code Contact Coil voltage Coil Cont. material Enclosure Rating Part number PCN-105D3MHZ,000 1-pole 5VDC 120mW AgNi RTIII - wash tight 3A 3-1461491-0 PCN-106D3MHZ,000 6VDC 3-1461491-1 PCN-112D3MHZ,000 12VDC 3-1461491-3 PCN-124D3MHZ,000 24VDC 3-1461491-6 PCN-124D3MHZ,001 5A 3-1461491-8 All PCN-112D3MZ-EX1,00400 12VDC 2071520-1 Note: This list represents the most common types and does not show all variants covered by this datasheet, other types on request. 2 08-2020, Rev. 0820 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2013 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.