KILOVAC 28 - 1800 Vdc High Voltage Relays PD10 Make & Break Load Switching Product Facts n Excellent for control applications n PCB and panel mountings n Rugged design for the most demanding applications, including seismic shock n Small size and weight n Low power consumption Panel mount version shown above is n No heat sinks required applicable to both PD5 and PD10. For PD10, the two power terminals n Vacuum-sealed can operate are .064 (1.63) diameter. Refer to in explosive and harsh PD5 for PCB mount dimensions. environments n 2000 V isolation across open contacts Life, (Mechanical/Rated Load) Release Time, Max., Including Product Specifications n Vacuum dielectric for power PD10A and PD10B Bounce 25C Contact Arrangement switching 500k cycles/10k cycles PD10A and PD10B 10 ms PD10A SPST-NO PD10P*** 7,000 cycles PD10P*** 6 ms PD10B SPST-NC Contact Resistance, Max., Insulation Resistance 500 Vdc, PD10P*** SPST-Latching End of Life Min. Contact Form PD10A and PD10B 0.030 ohm Initial/End of Life 100 mohm/50 mohm PD10A A** PD10P*** 0.030 ohm Weight, Nominal PD10B B** Dielectric at Sea Level 71 g (.156 lb) PD10P*** P** Power Terminals to Coil and Rated Resistive Load 320 Vdc Notes: All Other Points 10 A **Contact TE for availability of other PD10A and PD10B 1,800 Vrms contact forms Continuous Current Carry, Max. PD10P*** 2,000 Vrms ***Not available in package shown, 85C package is the same as the K41P. Shock, 11ms, 1/2 Sine (Peak) PD10A and PD10B 25 A For factory-direct application assistance, 25 g PD10P*** 30 A dial 800-253-4560, ext. 2055, or Vibration, Sinusoidal Overload 320 Vdc, 805-220-2055. (55-2000 Hz, Peak) 5 g (Make/Break) 20 A Operating Ambient Temperature Range Contact Ratings* PD10A and PD10B -40C to +85C PD10P*** -35C to +65C Operate Time, Max., Including Bounce 25C PD10A and PD10B 10 ms PD10P*** 6 ms Ordering Information Sample Part Number PD10 AA 5 7 Series: Contact Form: A = SPST-NO B = SPST-NC P = SPST-Latching *Based on extrapolated data. Since each application is unique, user is encour- aged to verify rating in actual application. The load terminals should always be Coil Voltage: connected as follows: Common Contact (A2) positive Other Contact negative. 2 = 12 Vdc, PCB Version 3 = 24 Vdc, PCB Version 5 = 125 Vdc, PCB Version Coil Data A = 12 Vdc, Panel Mount Version B = 24 Vdc, Panel Mount Version Nominal Volts DC 12 Vdc 24 Vdc 125 Vdc C = 125 Vdc, Panel Mount Version Max. Coil Voltage 14 Vdc 28 Vdc 130 Vdc Pickup, Max. 85C 8 Vdc 16 Vdc 80 Vdc Power Terminals: Hold, Min. 85C 3.3 Vdc 10 Vdc 33 Vdc 3 = PCB Solder Connection Dropout, Min. -40C .5 Vdc 1 Vdc 5 Vdc 5 = Stud Terminal, Panel Mount Coil Resistance (10%) 70 290 4700 Mounting: Ratings listed are for 25C, sea level conditions 5 = PCB Mount 7 = Panel Mount 756 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for General Purpose Relays category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : APF30318 JVN1AF-4.5V-F PCN-105D3MHZ 5JO-10000S-SIL 5JO-1000CD-SIL 5JO-400CD-SIL LY2S-AC220/240 LYQ20DC12 6031007G 6131406HQ 6-1393099-3 6-1393099-8 6-1393122-4 6-1393123-2 6-1393767-1 6-1393843-7 6-1415012-1 6-1419102-2 6- 1423698-4 6-1608051-6 6-1608067-0 6-1616170-6 6-1616248-2 6-1616282-3 6-1616348-2 6-1616350-1 6-1616350-8 6-1616358-7 6- 1616359-9 6-1616360-9 6-1616931-6 6-1617039-1 6-1617052-1 6-1617090-2 6-1617090-5 6-1617347-5 6-1617353-3 6-1617801-8 6- 1617802-2 6-1618107-9 6-1618248-4 M83536/1-027M CX-4014 MAHC-5494 MAVCD-5419-6 703XCX-120A 7-1393100-5 7-1393111-7 7-1393144-5 7-1393767-8